The use of furnaces, space heaters, and boilers as a method of indoor heating could result in incomplete combustion and the emission of carbon monoxide, nitrogen oxides, formaldehyde, volatile organic compounds, and other combustion byproducts. Incomplete combustion occurs when there is insufficient oxygen; the inputs are fuels containing various contaminants and the outputs are harmful byproducts, most dangerously carbon monoxide, which is a tasteless and odorless gas with serious adverse health effects.
Packaged terminal air conditioner (PTAC) systems are also known as wall-split air conditioning systems. They are ductless systems. PTACs, which are frequently used in hotels, have two separate units (terminal packages), the evaporative unit on the interior and the condensing unit on the exterior, with an opening passing through the wall and connecting them. This minimizes the interior system footprint and allows each room to be adjusted independently. PTAC systems may be adapted to provide heating in cold weather, either directly by using an electric strip, gas, or other heater, or by reversing the refrigerant flow to heat the interior and draw heat from the exterior air, converting the air conditioner into a heat pump. While room air conditioning provides maximum flexibility, when used to cool many rooms at a time it is generally more expensive than central air conditioning.
Central home air conditioner service systems consist of two major components: a condensing unit that sits outside your house, and the evaporator coil (often referred to as an A-coil) that sits in the plenum of your furnace or air handler. The refrigerant in the A-coil picks up the heat from your home and moves it to the outdoor condensing unit. The condensing unit fan blows outside air through the condensing coil to remove the heat. The condensing unit houses the three parts replaceable by a DIYer: the contactor, the start/run capacitor(s) and the condenser fan motor. The condensing unit also houses the compressor, but only a pro can replace that. The A-coil has no parts that can be serviced by a DIYer.
In 1906, Stuart W. Cramer of Charlotte was exploring ways to add moisture to the air in his textile mill. Cramer coined the term "air conditioning", using it in a patent claim he filed that year as an analogue to "water conditioning", then a well-known process for making textiles easier to process. He combined moisture with ventilation to "condition" and change the air in the factories, controlling the humidity so necessary in textile plants. Willis Carrier adopted the term and incorporated it into the name of his company.
We’re here to make your life a lot less hectic, and a lot more productive. As a local HVAC and Mechanical Contractor, MacDonald-Miller is committed to delivering true peace of mind. We perform regular inspections and maintenance of your building systems to ensure a greater level of operational excellence. We test, align, calibrate, and record performance to ensure your building’s equipment quality and reduce downtime or emergencies. When it comes to dedicated HVAC service & maintenance, MacDonald-Miller is unmatched.
Some systems include an "economizer mode", which is sometimes called a "free-cooling mode". When economizing, the control system will open (fully or partially) the outside air damper and close (fully or partially) the return air damper. This will cause fresh, outside air to be supplied to the system. When the outside air is cooler than the demanded cool air, this will allow the demand to be met without using the mechanical supply of cooling (typically chilled water or a direct expansion "DX" unit), thus saving energy. The control system can compare the temperature of the outside air vs. return air, or it can compare the enthalpy of the air, as is frequently done in climates where humidity is more of an issue. In both cases, the outside air must be less energetic than the return air for the system to enter the economizer mode.
Gas Furnaces Sequence of Operation | Electronic Ignition Gas Furnace Problems Troubleshooting | How To Light a Pilot Light | Heat Pump Breaker Trips | How Heat Pumps Work | Heat Pump Sequence of Operation | Condenser Fan Motor Repair | Air Conditioner Compressor Troubleshooting | Fuel-Gas Code Overview | SEER Definition | Air Conditioner Reviews | Boiler Reviews | Heat Pump Reviews | Heat Pump Problems | How to Wire a Thermostat | Goodman Heat Pump Reviews | Weil-McLain Boiler Reviews | Rheem Package Unit Reviews | Troubleshooting Broken Thermostats | Trane Versus Carrier Gas Furnaces | Carrier Heat Pump Reviews | Rheem Heat Pump Reviews | Trane Gas Furnace Reviews | Amana Gas Furnace Reviews
Call Miller's Air Conditioning & Heating at (925) 583-6387 and always speak with a live and helpful member of our team, who will immediately focus on your requirements. While our competitors punch a strict time clock, we realize heating and cooling challenges often arise outside of regular business hours. Rather than leave a message on a machine, take advantage of personalized service and the prompt response of radio dispatched trucks.
Low refrigerant charges take away from the life of the compressor. The compressor is cooled from the return refrigerant vapor. When there is a low charge there are fewer vapors to cool the compressor, therefore it runs hotter. Any compressor (or electric motor for that matter) which runs above the recommended temperature range will have a shorter life span and cost more to operate.
James Heating & A/C, Inc offers furnace service appointments that help keep your furnace in tip-top shape and operating efficiently for you all winter long. Whether that’s finding small issues before they become big problems, identifying potential safety hazards or making sure you’re maintaining your manufacturer’s warranty, our experts have you covered. Our trained technicians complete furnace service with care, inspecting a number of components in and around your furnace. In fact, our multi-point inspection can help make sure your system runs smoothly throughout the winter.
Replacing your old heating and cooling equipment with new, energy-efficient models is a great start. But to make sure that you get the best performance, the new equipment must be properly installed. In fact, improper installation can reduce system efficiency by up to 30 percent - costing you more on your utility bills and possibly shortening the equipment's life. Learn more.
Our heater went out last Saturday, which was a cold day. Called a few different places and they… Our heater went out last Saturday, which was a cold day. Called a few different places and they were the only ones that called back. The technician Tony came out and after a little testing said the main control board needed to be replaced. He quoted us a total of $489 which seemed on the high side but it was cold and we were somewhat desperate, so we agreed and paid a parts deposit.
The belt should slip right into place. If it seems to be too tight or difficult to set in place, it may be necessary to adjust the motor mount to provide more slack. Then you can re-tighten the tension once the belt is in place. Check the manufacturer’s specifications for proper tension—in most cases, the belt should deflect about an inch when you press down on it.
Protect your investment with HVAC services designed to create comfortable, energy efficient environments. National HVAC Service mechanical services safeguard against downtime and premature equipment failure while keeping facilities safe and comfortable. Our experienced HVAC technicians play a vital role in the daily operations of facility productivity and efficiency.
Regardless of the scope of your project, find out what you need to do to prepare your home for their visit. For example, the HVAC professional will need access to the areas in question and may need access to other mechanical or ventilation points. Make sure pets and children are kept out of the way. Ask if your project will involve removing dry wall or making any other structural changes – you may need to hire a professional drywall contractor to patch up HVAC work. If you are adding a unit that may contribute to carbon monoxide within the home, find out if you need to purchase a carbon monoxide detector.
Abacus’ licensed Electricians can troubleshoot any electrical problems you may have and replace or repair items such as electrical panels and circuit boards, electric surge protection, LED lighting, ceiling fans, complex electrical wiring or rewiring, backup or standby electric generators and more. Want an annual electrical inspection on all your lighting and electrical systems? Ask about the AMP Plan that can save you up to 15% on electrical repairs. This plan includes many things such as an annual electrical safety check to make sure that your home is safe and working properly for you and your family. Our licensed electricians will make sure that the electricity in your home is running at maximum efficiency.
While a lot of people know the consequences of heating system problems during the winter, the season comes with its own set of unique problems that require a call to the plumber. The most received calls we receive during these months are for frozen pipes, broken water lines and failing water heaters. We’ve been through it all. And with 24/7/365 Emergency Plumbing Service from Service Experts, you don’t have to worry about any of it. When you need a plumber, we are here for you. What’s even better is that, just like all of our other services and products, any plumbing repair or work performed by Service Experts is covered by a 100% Satisfaction Guarantee*.
The main problem when installing a multi-split system is the laying of long refrigerant lines for connecting the external unit to the internal ones. While installing a separate split system, workers try to locate both units opposite to each other, where the length of the line is minimal. Installing a multi-split system creates more difficulties, since some of indoor units can be located far from the outside. The first models of multi-split systems had one common control system that did not allow you to set the air conditioning individually for each room. However, now the market has a wide selection of multi-split systems, in which the functional characteristics of indoor units operate separately from each other.
Since 1971, One Hour Heating & Air Conditioning has been the leading Charlotte AC repair company. Our technicians are not only professional experts, but they work 24/7, 365 days a year to make sure you’re comfortable. Plus, they’re “Always on time… or you don’t pay a dime.” ®. If you are looking for heating and air in Charlotte NC, you are in the right place!
Allow our experts to help with any of your heating and cooling needs or questions. Our wide array of expertise and background will benefit you and your home, whether you are considering a replacement system or evaluating your whole system to check for areas of improvement. We can help you reach your optimum indoor comfort. Give us a ring at 866-397-3787 or request an appointment online.