Fast forward 1 year and 1 week and the circuit board that HVAC Service had installed has failed again. They came out and said that it failed from water condensation dripping onto it, so we needed to replace it and reroute the pipes to prevent future water damage. That would cost double what I paid last year. Why didn't they fix the problem last year at the initial repair instead of putting in a circuit board that was bound to fail again?!? They were strongly recommending that the furnace be completely replace for a huge fee to avoid the same thing happening again. I paid $59 for them to tell me they didn't fix it right last year. This didn't feel right, so I sought a second opinion.
The heat-exchanger cools the air that is being forced through it by the furnace blower. As the warm air comes in contact with this cool surface the water in the air condenses. By pulling the water molecules from the air. According to the psychometric chart as relative humidity decreases in order to feel cool you will have to lower the temperature even more. A common way to counteract this effect is by installing a whole-home humidifier. Similarly, installing a high efficient system this need to turn the temperature down wont have such and influence on your energy costs.
At Peachtree Service Experts in Tucker, we recognize that for most people, purchasing a new furnace is a big deal. If you’ve been continually ignoring your furnace, don’t put it off any longer: We can take you through the process of purchasing, installation, and maintenance, because frankly, it’s comforting to work with a team who’s been through the purchase process hundreds of times. You wouldn’t ask a plumber to fix a refrigerator, and the same principle applies for heating and cooling systems. When your service provider is competent and efficient, you’ll save money and increase your peace of mind in one fell swoop.
1) Change your filter. The simplest and most effective way to keep your AC running smoothly is changing your filter once a month. By regularly changing your filter, you reduce a lot of the burden on your system. A dirty or clogged filter makes your air conditioner work much harder than does a clean filter. Changing your filters regularly is easy on your budget and easy on your system as well. It will lower your utility bill and extend the life of your AC.
Having a working air conditioning unit is something that a lot of people take for granted, especially in the summer. However, when the air conditioning unit breaks, it becomes immediately clear just how much it was relied on. Unfortunately, it always seems as though air conditioning units break at the worst possible times. When this happens, it’s important to know the average AC repair cost, how to get the air conditioning unit fixed quickly and how to find the right contractor.
We were following up on this review and the service call we did for you. We could not find you in our system of ever having gone out to your home. If you could please provide us with the date we were out and the name under which the call was placed that would be great as we would like to see if there is any way we can rectify the situation. We do offer a 100% Satisfaction Guarantee, we have tried to private message you to no avail. Can you please call us at 925-318-4795?
RepairClinic.com® is the trusted online parts store with 3,000,000+ appliance parts, lawn mower parts, power tools and heating and cooling parts for over 200 appliance, lawn equipment, power tools and heating & cooling equipment brands. Since our launch in 1999, RepairClinic.com has helped 4,500,000+ people save more than $500 million in repair costs by fixing stuff on their own.
We do our best to screen all of our hvac contractors. However, there are still some hvac contractor professionals in Portland that have not been pre-screened. This means that their licenses may not be up to date to operate in Portland or OR. Always be sure to pre-screen them yourself before hiring. Here are some unscreened professionals offering hvac:
The liquid refrigerant is returned to another heat exchanger where it is allowed to evaporate, hence the heat exchanger is often called an evaporating coil or evaporator. As the liquid refrigerant evaporates it absorbs energy (heat) from the inside air, returns to the compressor, and repeats the cycle. In the process, heat is absorbed from indoors and transferred outdoors, resulting in cooling of the building.
Not obvious is the fact that they need maintenance routinely, just like any other machine. The filter, usually located behind the front grill, needs to be washed. The condenser coil at the back of the unit can accumulate a lot of debris, and might require a special chemical bath. All air conditioning systems, large or small, need good air flow across the evaporator coil and the condenser coil. Efficiency and performance drop rapidly as air flow decreases. Lose enough air flow and the unit will burn out. Rodents can nest inside when not in use, and can foul up the unit in many ways. Wasps and hornets, as well as the honey bee find finned coils to be comfortable nesting places. Nests and dead insects can ruin the air conditioner.
An air conditioning system, or a standalone air conditioner, provides cooling and humidity control for all or part of a building. Air conditioned buildings often have sealed windows, because open windows would work against the system intended to maintain constant indoor air conditions. Outside, fresh air is generally drawn into the system by a vent into the indoor heat exchanger section, creating positive air pressure. The percentage of return air made up of fresh air can usually be manipulated by adjusting the opening of this vent. Typical fresh air intake is about 10%.
If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.
We will get into specifics later, but there are plenty of recommended maintenance items all homeowners should strongly consider if you want you to extend the lifespan of your AC unit. Furthermore, regular maintenance prevents certain repairs less organized homeowners see every few years. Some easy and highly recommended AC unit maintenance tasks include:
The basic concept behind air conditioning is said to have been applied in ancient Egypt, where reeds were hung in windows and were moistened with trickling water. The evaporation of water cooled the air blowing through the window. This process also made the air more humid, which can be beneficial in a dry desert climate. In ancient Rome, water from aqueducts was circulated through the walls of certain houses to cool them. Other techniques in medieval Persia involved the use of cisterns and wind towers to cool buildings during the hot season.
Service Experts Heating and Air Conditioning was built with the understanding of delivering customers with the best heating and cooling practices in the industry. Since its inception, Peachtree Service Experts in Atlanta has been dedicated to our area, offering the first class HVAC (Heating, Ventilation, Air Conditioning) products and services in the area. If you want more specifics about your area HVAC leaders, simply dial us at 678-235-9699 or set up an appointment with us online.
One of the easiest maintenance tasks consumers can do themselves is maintaining the filters. Air filters should be inspected and cleaned once a month. This allows for regular monitoring to eventually determine when the filter needs to be replaced. Most filters can be changed every three months if no other problems exist. Maintaining clean and regularly changed filters will not only produce better air quality, but appliances will function more efficiently, which can save on heating and cooling costs.
Reinstall the access panel and disconnect block. Turn on the circuit breaker and furnace switch. Then set the thermostat to a lower temperature and wait for the AC to start (see “Be Patient at Startup,” below). The compressor should run and the condenser fan should spin. If the compressor starts but the fan doesn’t, the fan motor is most likely shot. Shut off the power and remove the screws around the condenser cover. Lift the cover and remove the fan blade and motor (photo 7). Reinstall the blade and secure the cover. Then repower the unit and see if the fan starts. If it doesn’t, you’ve given it your best shot—it’s time to call a pro.