Denver HVAC Repair

If you ever need a repair or maintenance preformed on your Trane air conditioning and heating equipment, we hope you’ll give R.S. Andrews a chance to earn your business. Literally tens of thousands of homeowners have called our hotline for repairs. While you can’t please everyone, we try and have done so in over 99% of the services calls we have performed. It’s a high standard equaled by the quality of Trane air conditioners, furnaces and heat pumps. Call now for service and repair. And don’t forget that we provide plumbing and electrical service and repair, too.

Other InformationCost to install a bathroom medicine cabinetCost to install a basement windowCost to install a bifold doorCost to install a door frameCost to install a bay windowCost to hang a prehung doorCost to install a door knobCost to install a door jambCost to install a bathtubCost to install a faucetCost to install a bidetCost to hang wallpaper

San Jose, CA ServicesLOWE'S OF CENTRAL SAN JOSE - Bathroom Design and RemodelAll Weather Roofing. Roofing Contractor - San Jose, CACuong's Carpet Cleaning. Carpet Cleaner - San Jose, CAE Z Home. Landscaping Company - San Jose, CACrown Plumbing. Plumber - San Jose, CAGardens Alive Landscape MaintenenceMarcone Appliance PartsJet Dry Carpet CleaningPatrick Ross ConstSwat Pest ControlAwr DumpstersTron Air
It doesn’t matter the time, our experts will have your home back to being comfortable in no time. We stand by our workmanship so much so that we guarantee it in writing for a full year. Our 100% Satisfaction Guarantee* firmly demonstrates our commitment to providing the best heating system service in the industry. Repairing, selling and installing heating systems is something we do every day. More people trust us with their home comfort, so you know your home will be back to being warm and cozy quickly.
Yes. You should expect to pay a diagnostic fee to cover the cost of the technician's visit, the diagnosis of your air conditioner's problem, and a quote for the repair options. You will be advised of the issue along with recommended options to correct it, which may include a system replacement if your unit is old or significantly damaged. If you decide to replace the system, the diagnostic fee will be credited toward your replacement purchase.

Poor dehumidification can also be caused by excessive humidity in the home. This may be caused by water leaks or open windows during humid periods or by a lack of proper condensate drainage from your evaporator coil in the furnace's plenum. A properly functioning cooling unit produces condensate and drains it away. If your unit is not producing condensate its cooling and dehumidification functions are not working properly.
If you happen to live in a hot and humid area of the country, drainage problems can occur with your unit since moisture can trap itself inside the system. Routine maintenance can cut down on drainage issues by cleaning out any mold or algae from blocking the drain. If you notice moldy smells whenever you turn the thermostat down, check on your system.
To clean your air conditioner drain, first shut off the power to your unit at both the thermostat and the breaker. Then remove the drain pan. If the pan is full of water, soak up the liquid with a few towels or rags or use a wet vacuum. You can use a solution of water and distilled vinegar, or substitute peroxide for the vinegar, to clean out the drain pipe. Let the pipe sit for a while in the solution and then put all the parts back in place. Once you start using your air conditioner on a regular basis, check it periodically to ensure condensation isn't building up.
An air conditioner’s cooling process produces condensation, which normally flows away from the equipment, causing no problem. If there is a clog in the condensate drain lines or drip pan, or if outdoor humidity levels are high, moisture may back up into your air conditioner. Excess condensation will increase indoor humidity levels and hinder the air conditioner’s performance. It could also cause damage to your air conditioner’s components.

Natural ventilation is the ventilation of a building with outside air without using fans or other mechanical systems. It can be via operable windows, louvers, or trickle vents when spaces are small and the architecture permits. In more complex schemes, warm air is allowed to rise and flow out high building openings to the outside (stack effect), causing cool outside air to be drawn into low building openings. Natural ventilation schemes can use very little energy, but care must be taken to ensure comfort. In warm or humid climates, maintaining thermal comfort solely via natural ventilation might not be possible. Air conditioning systems are used, either as backups or supplements. Air-side economizers also use outside air to condition spaces, but do so using fans, ducts, dampers, and control systems to introduce and distribute cool outdoor air when appropriate.

One problem occurred on Monday.  When we called at 2:30 in the afternoon to check on status, we were told that "the tech is on the phone with the parts supplier now".  It seems more likely that they had forgotten about us and our call woke them up.  But even if true, why the heck did they wait until 2:30 to order the part?  Maybe if they had ordered it in the morning they could have had it the same day.  So I'm taking off one star for that.


The condensed, pressurized, and still usually somewhat hot liquid refrigerant is next routed through an expansion valve (often nothing more than a pinhole in the system's copper tubing) where it undergoes an abrupt reduction in pressure. That pressure reduction results in flash evaporation of a part of the liquid refrigerant, greatly lowering its temperature. The cold refrigerant is then routed through the evaporator. A fan blows the interior warm air (which is to be cooled) across the evaporator, causing the liquid part of the cold refrigerant mixture to evaporate as well, further lowering the temperature. The warm air is therefore cooled and is pumped by an exhaust fan/ blower into the room. To complete the refrigeration cycle, the refrigerant vapor is routed back into the compressor. In order for the process to have any efficiency, the cooling/evaporative portion of the system must be separated by some kind of physical barrier from the heating/condensing portion, and each portion must have its own fan to circulate its own "kind" of air (either the hot air or the cool air).
Changing your central air conditioning unit's air filter at least once every six months will not only help you save on your monthly bills but also will help extend the life of your system. Changing the filter every three months is even better. All the air in your home circulates and recirculates through the same filter attached to your indoor unit. Designed to remove dust particles to keep the air you breathe clean, filters become clogged, causing your air conditioning and heating system to work less efficiently and costing you more to operate it. If left unchanged long enough, your system could fail completely.

The Refrigeration Loop is a closed system and refrigerant should never have to be added to the unit unless there is a leak. Most residential units use R-22/R410A refrigerant. Prices of R-22/R410A are rising every year as we get closer to the date when refrigerant manufacturers will no longer be able to make R-22/R410A. Phase-out of R-22, an HCFC, begins in 2010 and expected to be complete by 2020.). Furthermore, make sure you ask what the service company charges for R-22 when you are calling an HVAC contractor.


Waited a week for technician who showed up for less than 15 minutes and told me that my air filters were dirty and I needed to experiment with thermostats to be comfortable. Thermostat shows temp at 75 when set on 71. Did what he instructed and still had problems when I realized unit was short cycling. When I called technician he told me I would have to place a new request for service. He gave me the office number and hung up on me. By the time I called office he had called in and said he refused to come back out. The operator would not give me business owners name and could not tell me why technician refused to return although they did say they would refund the fee for service call. Telephone rep yelled at me.
My A/C went out on a Friday and I found this company in the phone book on Saturday morning. They came out just a few hours later and it was decided that I needed a new system. The pricing was good as well as the customer service. They brought me a temporary portable air conditioner for Saturday night and they replaced my system on Sunday. This company has the best customer service of any business that I have dealt with. I would highly recommend this company to anyone and have. Great Company!!!!!
Was not satisifed with this company. This person came out and took 10 minutes only to tell me that my unit would not last for a year and that I needed to have it replaced! I'm not sure if he was very knowlegable or if he was just plain lazy and do not even try to fix the problem. He just wanted to install a brand new system because he was both and of course, that's much more money for him!
The condenser fan is another important HVAC element that must be maintained. Condenser fans that contain oil ports should be lubricated at least annually. The outside condenser should also be shielded from direct sunlight if possible. Keeping vegetation at least two feet away from outdoor HVAC units will also promote higher performance and potentially lower energy bills due to higher efficiency. The further away vegetation is, the better an HVAC unit will operate. 

At Van Haaften Plumbing & Heating, heating and cooling isn’t just our job, it’s our passion. We’re dedicated to providing you with the top HVAC service in Pella. No matter the size of the problem or time of day, you can rely on us to get the job done properly. After all, Van Haaften Plumbing & Heating has been serving the community since 1949, bringing comfort to our customers in every season.
Since 1971, One Hour Heating & Air Conditioning has been the leading Charlotte AC repair company. Our technicians are not only professional experts, but they work 24/7, 365 days a year to make sure you’re comfortable. Plus, they’re “Always on time… or you don’t pay a dime.” ®. If you are looking for heating and air in Charlotte NC, you are in the right place!
If your HVAC equipment is more than 10 years old or not keeping your house comfortable, have it evaluated by a professional HVAC contractor. If it is not performing efficiently or needs upgrading, consider replacing it with a unit that has earned the ENERGY STAR. Depending on where you live, replacing your old heating and cooling equipment with ENERGY STAR qualified equipment can cut your annual energy bill by more than $115. But before you invest in a new HVAC system, make sure that you have addressed the big air leaks in your house and the duct system. Sometimes, these are the real sources of problems rather than your HVAC equipment.
Combined, our people can offer decades worth of HVAC service and installation experience in Tucker, which we bring to every single job we do. Our staff believes wholeheartedly that reliability, passion, and expertise are critical to providing our customers with good service, and we can do that for both residential and commercial clients. For commercial buildings, in which safety and maintenance are key values, we are the best provider for your needs. From weekly safety meetings to provided protective equipment and mandatory site risk assessments, our technicians can install, repair, and maintain all commercial HVAC products under the purview of the very highest safety standards. In addition, we can give you a one-year, 100% Satisfaction Guarantee* on commercial service. Most companies only guarantee their work for the first few months, but we believe that we can, and will, do an exemplary job for all our customers in Tucker.
Replacing a capacitor is easy. Just take a photo of the wires before disconnecting anything (you may need a reference later on). Then discharge the stored energy in the old capacitor (Photo 4). Use needle-nose pliers to pluck one wire at a time from the old capacitor and snap it onto the corresponding tab of the new capacitor. The female crimp connectors should snap tightly onto the capacitor tabs. Wiggle each connector to see if it’s tight. If it’s not, remove the connector and bend the rounded edges of it so it makes a tighter fit on the tab. When you’ve swapped all the wires, secure the new capacitor (Photo 5).
×