Denver HVAC Repair

Outside of your home is an outdoor unit, which is called a condenser. Inside the condenser is a compressor, a condenser coil, and a large fan. The compressor pumps cool refrigerant to an evaporator coil located either in the air handler or just outside the furnace. The evaporator coil gets really cold so that when the blower or furnace pushes warm air past it, the air is cooled. This cool air is then distributed throughout your home through a series of air ducts. Heat is absorbed by the evaporator coil, which warms the refrigerant moving through the coils. This warm refrigerant is then pumped back outside to the condenser coil, where a giant fan cools it off allowing the warm air to escape. This cycle is repeated until your thermostat detects that your home has reached the temperature you set it to.

They did come out Tuesday and completed the job.  We called the office to ask for a breakdown of the cost and they said the tech would call us back, but that never happened.  Eventually Alberto called and explained the breakdown.  One reason it was more was they used an OEM circuit board, rather than an aftermarket part.  I agree with this but it would have been better if this had been explained from the beginning.  All in all, it still seems like their price is a bit on the high side, but they did a good job and used OEM parts so I'm giving them four stars. Read more
This company deserves more than five stars. They didn't just replace my heater and air conditioner, they built me a new system for my house. Going above and beyond is a understatement. Steve's staff were 2 of the nicest workers I've come across in a long time. Friendly, knowledgeable, and very clean. Truly a top rated company. Thanks Steve. Great job.
James Harrison's first mechanical ice-making machine began operation in 1851 on the banks of the Barwon River at Rocky Point in Geelong, Australia. His first commercial ice-making machine followed in 1853, and his patent for an ether vapor compression refrigeration system was granted in 1855. This novel system used a compressor to force the refrigeration gas to pass through a condenser, where it cooled down and liquefied. The liquefied gas then circulated through the refrigeration coils and vaporized again, cooling down the surrounding system. The machine produced 3,000 kilograms (6,600 lb) of ice per day.[citation needed]

I even asked if this is something they don't do, as in services on a Saturday night.  I was told by the receptionist that they do and I would just be ok calling another company if they is not  part of their services. They again assured me someone WILL call me in 10 mins.  Well, unless their definition of 10 mins is never, then they got it wrong as I am still waiting to be called 5 days later.

   As for parts prices, we are a business and factor in profit and overhead into our pricing structure, and frequently research other companies to be sure we are competitive, which we are. Jody, you did not pay $400 for labor, you paid $489 for a flat rate repair which included, travel, labor, diagnostics, parts, tax, shipping, truck charge, fuel charge, overtime rate, profit and overhead. As for the time of the actual repair, if it had taken 2 or 3 hours the cost would have still been the same $489.        
Before selecting the installation location of air conditioner, several main factors need to be considered. First of all, the direction of air flow from the indoor units should not fall on the place of rest or work area. Secondly, there should not be any obstacles on the way of the airflow that might prevent it from covering the space of the premises as much as possible. The outdoor unit must also be located in an open space, otherwise the heat from the house will not be effectively discharged outside and the productivity of the entire system will drop sharply. It is highly advisable to install the air conditioner units in easily accessible places, for further maintenance during operation.
In 1902, the first modern electrical air conditioning unit was invented by Willis Carrier in Buffalo, New York.[citation needed] After graduating from Cornell University, Carrier found a job at the Buffalo Forge Company. There, he began experimenting with air conditioning as a way to solve an application problem for the Sackett-Wilhelms Lithographing and Publishing Company in Brooklyn, New York. The first air conditioner, designed and built in Buffalo by Carrier, began working on 17 July 1902.[citation needed]
Our skilled technicians arrive prepared to handle the scope of even complex malfunctions, with all makes and models of heating and cooling equipment, most often resolving the problem on the spot.  For all your HVAC service, repairs, and installations in Livermore, CA, Pleasanton, CA & Dublin, CA, call the team from Miller’s Air Conditioning & Heating!
Most of the time, diagnosing problems is simple and other times it can be a complicated process where the HVAC technician calls in another HVAC technician. The technician may call in an HVAC manufacturer representative. Residential and commercial heating and cooling is important and you want the best possible HVAC air conditioning and heating service. It does not matter whether you have a Carrier Air Conditioner, Trane Air Conditioners, or need a replacement, whatever, it is best to get a qualified technician to look at your system before a decision is made to repair or replace the air conditioner or heat pump systems.
I originally took off one star because of the SNAFU with getting the part ordered.  When Alberto called me on the phone he admitted the person had "gotten busy with other things" and apologized.  THAT was taking the high road and I was impressed by that.  Sadly, for reasons I won't guess at, Alberto has decided to take the low road in his comments and imply that they got the part as quickly as possible.  Well, we called at 2:30 so did someone spend six and a half hours finding the part??  That seems very doubtful.

Some service providers may recommend repairs and maintenance tasks that are not needed. A savvy consumer who has researched how an HVAC system works and is familiar with most common maintenance tasks will quickly know the difference between necessary tasks and add-on services that drain the wallet. If a heating or cooling problem occurs, appliance service manuals typically contain troubleshooting tips and other information that may be helpful in identifying or even resolving the problem without calling a repairman. Online HVAC guides may also be helpful to a consumer who wishes to become more familiar with how an HVAC system works and potential signs of disrepair. 


Heaters are appliances whose purpose is to generate heat (i.e. warmth) for the building. This can be done via central heating. Such a system contains a boiler, furnace, or heat pump to heat water, steam, or air in a central location such as a furnace room in a home, or a mechanical room in a large building. The heat can be transferred by convection, conduction, or radiation.
HVAC services is our go to contractor when it comes to our HVAC needs. Back in 2013, we were dealt some unforeseeable home projects, as our HVAC was failing and needed to replace the whole system, e.g. Furnace, Blower, A/C, Condenser, Vents, etc... We reached out to a few HVAC companies (Contra Costa Heating and Air, EP builders, High Performance Heating and Air) so we could compare the bids for the job. We have had some issues with past contractors and after thoroughly screening a few of the above mentioned HVAC contractors, we awarded the bid to HVAC services because of their superior customer service and very reasonable pricing. From Day 1, Alberto walked us through the process, and present us with a variety of options based our budget for the project. His customer service is the best as he did not oversell any services and did not nudge us towards buying a unit that would stretch our budget. On installation day, HVAC Services sent out a crew of 6-7 guys, all of whom were very polite and kept their work areas clean, and installed the whole system the same day. Although it's been 2 years since we have had the HVAC system installed, HVAC Services continues to provide great customer services, coming out semi-annually to check on the HVAC system and adjusting the airflow within the house. Definitely recommend them!!!!
Air conditioning units work by using evaporator and condenser coils to remove heat from the air in your home. Warm household air blows through the evaporator coils, which transfer the heat into refrigerant vapor, which is then moved to the condenser in the outdoor part of the unit. The condenser coils turn the now-warm refrigerant vapor into liquid, allowing the heat to be dispersed outside and away from your home.
Many homes in Portland don't have air conditioning of any kind. Whether your home is decades old or just a few years, the wisdom is that the moderate climate of Portland will be enough to keep you comfortable. In fact, when building a home, you typically need to request air conditioning installation from your home builder. With an average of only two weeks or so worth of days that hit 90 degrees, many people simply can't justify the expense. Of course, HomeAdvisor does see quite a few Portland air conditioning installation requests, simply because so many homeowners don't have central air. If you've decided it's time to indulge yourself or have recently moved into a Portland home without air conditioning, we can help you find a contractor who will help you with any or all of your A/C needs.
Protect your investment with HVAC services designed to create comfortable, energy efficient environments. National HVAC Service mechanical services safeguard against downtime and premature equipment failure while keeping facilities safe and comfortable. Our experienced HVAC technicians play a vital role in the daily operations of facility productivity and efficiency.

New heating and cooling equipment installations present a wide variety of options that can save you money on your power bills and reduce the amount of HVAC maintenance and service that will ultimately be required over the life of your new unit. Energy-efficient options like heat pumps, two-stage furnaces, air-to-heat exchangers (HRVs), and programmable thermostats can all go a long way toward increasing efficiency and extending the life expectancy of your system.
You should also have air ducts cleaned after recent water contamination or water damage to prevent mold; after renovations or remodeling to ensure debris and dust didn’t settle in the vents and ducts; if you are having problems with allergies or asthma; or when you are moving into a newly purchased home, especially if the previous owners smoked or had pets. The National Air Duct Cleaners Association (NADCA) recommends getting your air ducts cleaned every three to five years, or every two to three years in regions where homeowners use their air conditioning and heater for many months of the year, while the EPA suggests homeowners have duct cleaning done as needed.

We offer 24-hour emergency service, with no overtime charges. Our fully stocked trucks with thousands of specialty parts and materials on board are ready to serve you and fix your heating or air conditioner problem on the first call. And when your family's health, safety, and comfort are involved, that means peace of mind. Quality service is important to our clients, and our goal is to ensure that your needs are met when heating or air conditioning issues that arise.
It doesn’t matter the time, our experts will have your home back to being comfortable in no time. We stand by our workmanship so much so that we guarantee it in writing for a full year. Our 100% Satisfaction Guarantee* firmly demonstrates our commitment to providing the best heating system service in the industry. Repairing, selling and installing heating systems is something we do every day. More people trust us with their home comfort, so you know your home will be back to being warm and cozy quickly. 

We’re here to make your life a lot less hectic, and a lot more productive. As a local HVAC and Mechanical Contractor, MacDonald-Miller is committed to delivering true peace of mind. We perform regular inspections and maintenance of your building systems to ensure a greater level of operational excellence. We test, align, calibrate, and record performance to ensure your building’s equipment quality and reduce downtime or emergencies. When it comes to dedicated HVAC service & maintenance, MacDonald-Miller is unmatched.
Without proper ventilation, carbon monoxide can be lethal at concentrations of 1000 ppm (0.1%). However, at several hundred ppm, carbon monoxide exposure induces headaches, fatigue, nausea, and vomiting. Carbon monoxide binds with hemoglobin in the blood, forming carboxyhemoglobin, reducing the blood's ability to transport oxygen. The primary health concerns associated with carbon monoxide exposure are its cardiovascular and neurobehavioral effects. Carbon monoxide can cause atherosclerosis (the hardening of arteries) and can also trigger heart attacks. Neurologically, carbon monoxide exposure reduces hand to eye coordination, vigilance, and continuous performance. It can also affect time discrimination.[15]

We have been using Bill Howe Plumbing's service for more than 25 years and have been pleasantly surprised at how consistently they perform an excellent service call. We use them for our home and our rental properties, and their dispatchers and technicians have always been the best at problem solving; our tenants have told us how great the service is as well. When we needed air conditioning service, naturally we called Bill Howe first. There's no reason to call anyone else. I know the job will be done right the first time, with fair pricing and professional service.


An air conditioner’s cooling process produces condensation, which normally flows away from the equipment, causing no problem. If there is a clog in the condensate drain lines or drip pan, or if outdoor humidity levels are high, moisture may back up into your air conditioner. Excess condensation will increase indoor humidity levels and hinder the air conditioner’s performance. It could also cause damage to your air conditioner’s components.
Designed to improve manufacturing process control in a printing plant, Carrier's invention controlled not only temperature but also humidity. Carrier used his knowledge of the heating of objects with steam and reversed the process. Instead of sending air through hot coils, he sent it through cold coils (filled with cold water). The air was cooled, and thereby the amount of moisture in the air could be controlled, which in turn made the humidity in the room controllable. The controlled temperature and humidity helped maintain consistent paper dimensions and ink alignment. Later, Carrier's technology was applied to increase productivity in the workplace, and The Carrier Air Conditioning Company of America was formed to meet rising demand. Over time, air conditioning came to be used to improve comfort in homes and automobiles as well. Residential sales expanded dramatically in the 1950s.[citation needed]

Did your furnace suddenly stop working? Call Coolray and relax! Our skilled HVAC technicians can repair all makes and models of furnaces, heat pumps and heating equipment. We serve Cumming, GA with 24-hour heating repair service that you can count on when you need it. Our technicians will arrive on time and will be equipped with the tools necessary to correctly diagnose and repair your heating system. Just need routine maintenance on your furnace? We can do that too. Looking for a new system altogether? We're the HVAC contractor Cumming, Georgia residents can count on for all of their home heating needs!

All your HVAC needs are addressed, including finding a local heating and air conditioning contractor in your area. We offer information for a variety of brands and products in the HVAC industry, so you can care for your heating and cooling system, or know when to call a licensed HVAC contractor to repair your HVAC system. Get knowledgeable advice from the experts at HVAC.com today!


HVAC.com is your one-stop shop for finding local air conditioner repair. Our free online contractor directory is home to HVAC contractor listings from across the U.S. Just type in your ZIP code to find HVAC pros in your area. You can even narrow down search results, which will help you find contractors with specific qualifications or who service certain brands.
Reinstall the access panel and disconnect block. Turn on the circuit breaker and furnace switch. Then set the thermostat to a lower temperature and wait for the AC to start (see “Be Patient at Startup,” below). The compressor should run and the condenser fan should spin. If the compressor starts but the fan doesn’t, the fan motor is most likely shot. Shut off the power and remove the screws around the condenser cover. Lift the cover and remove the fan blade and motor (photo 7). Reinstall the blade and secure the cover. Then repower the unit and see if the fan starts. If it doesn’t, you’ve given it your best shot—it’s time to call a pro.
×