Denver HVAC Repair

Regardless of how far along you are in your air conditioning project, you should start looking for a contractor now. The demand for Portland air conditioning has begun to outstrip the supply of contractors, and homeowners are telling us they've had to fight/wait to schedule an installation date. This may also determine the availability of your preferred contractor, as the best contractors' schedules tend to fill more quickly than the rest. Once you've submitted your online request, you can trust that our contractors are the most reliable professionals in the business. Each and every one our contractors has been put through a rigorous ten-step screening process. Our online customer ratings and reviews section will allow you to see what other homeowners have said, not just about individual contractors, but Portland air conditioning installation in general.
The first air conditioners and refrigerators employed toxic or flammable gases, such as ammonia, methyl chloride, or propane, that could result in fatal accidents when they leaked. Thomas Midgley, Jr. created the first non-flammable, non-toxic chlorofluorocarbon gas, Freon, in 1928. The name is a trademark name owned by DuPont for any chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC), or hydrofluorocarbon (HFC) refrigerant. The refrigerant names include a number indicating the molecular composition (e.g., R-11, R-12, R-22, R-134A). The blend most used in direct-expansion home and building comfort cooling is an HCFC known as chlorodifluoromethane (R-22).
My A/C went out on a Friday and I found this company in the phone book on Saturday morning. They came out just a few hours later and it was decided that I needed a new system. The pricing was good as well as the customer service. They brought me a temporary portable air conditioner for Saturday night and they replaced my system on Sunday. This company has the best customer service of any business that I have dealt with. I would highly recommend this company to anyone and have. Great Company!!!!!

Even if your air conditioning unit is still working, depending on the type of system in your home today, you could recoup your investment in a new system in as little as three years. However, that doesn't mean that your system needs to be replaced. Furnaces, air conditioners, and other heating and cooling systems have made tremendous gains in efficiency over the past five years, so if you have an older unit, it is worth taking a look at whether or not a repair is the best investment.
Ductwork pinging or popping. If you hear a pinging or popping sound coming from metal ductwork, this may be caused by thermal expansion or by air blowing past a loose flap of metal. Track along the duct runs, listening for the sound. If you find it, make a small dent in the sheet metal to provide a more rigid surface that’s less likely to move as it heats and cools.
No matter where you bought your air conditioning system, we can repair it. We have years of experience working with all the best central air conditioner brands such as Kenmore, Carrier. Trane, Goodman, and Rheem. As a result, you can rest assured we’re familiar with your air conditioning system and we have the parts you need to complete a successful air conditioner repair.
Focus first on sealing ducts that run through the attic, crawlspace, unheated basement, or garage. Use duct sealant (mastic) or metal-backed (foil) tape to seal the seams and connections of ducts. After sealing the ducts in those spaces, wrap them in insulation to keep them from getting hot in the summer or cold in the winter. Next, look to seal any other ducts that you can access in the heated or cooled part of the house. See our Duct Sealing Fact Sheet (787KB) for more information.
BIG THANK YOU for being honest, and advising us that for some reason the fuse/switch was in the reverse position so the AC unit would not properly turn on.   The unit turned back on immediately, and began cooling the house.   And then providing advice that the AC/Heating system needed some TLC, and giving us options to save money by purchasing a maintenance plan that included the filters plus cleaning services since we were already being charged for the service today.
Tony was very good - appointment took a while to book, but that's understandable, since they have built a great business and have lots of people calling them. Tony came this Sunday morning, and once he saw the HVAC unit, knew exactly what the issue was - fixed it in under 20 mins, and my AC was back to normal Pricing is fair - parts, labor and diagnostic fee and tax I would definitely recommend him to anyone needing his services. He's honest, very nice to deal with even made my toddler son smile. 5 STARS ALL THE WAY!
An important component of natural ventilation is air change rate or air changes per hour: the hourly rate of ventilation divided by the volume of the space. For example, six air changes per hour means an amount of new air, equal to the volume of the space, is added every ten minutes. For human comfort, a minimum of four air changes per hour is typical, though warehouses might have only two. Too high of an air change rate may be uncomfortable, akin to a wind tunnel which have thousands of changes per hour. The highest air change rates are for crowded spaces, bars, night clubs, commercial kitchens at around 30 to 50 air changes per hour.[17]
The most recognized standards for HVAC design are based on ASHRAE data. The most general of four volumes of the ASHRAE Handbook is Fundamentals; it includes heating and cooling calculations. Each volume of the ASHRAE Handbook is updated every four years. The design professional must consult ASHRAE data for the standards of design and care as the typical building codes provide little to no information on HVAC design practices; codes such as the UMC and IMC do include much detail on installation requirements, however. Other useful reference materials include items from SMACNA, ACGIH, and technical trade journals.

Check your filter every month, especially during heavy use months (winter and summer). If the filter looks dirty after a month, change it. At a minimum, change the filter every 3 months. A dirty filter will slow down air flow and make the system work harder to keep you warm or cool — wasting energy. A clean filter will also prevent dust and dirt from building up in the system — leading to expensive maintenance and/or early system failure.

Monday the following week, no phone calls, or follow up.  I call to get an update and am told that they cannot install my system because they don't have time.  I ask what does that mean, one year? One week? Until the end of summer they say.  What does that mean I ask?  They say at the end of September.  I say thank you for wasting 1 month of my time.
Count on R.S. Andrews for all of your residential and commercial air conditioning repair and installation needs. Our team repairs and maintains all the major brands including Trane, Carrier, Lennox, Bryant, American Standard, Goodman and more. Our fleet a fully stocked trucks will arrive ready to go to work. Most of the parts for maintenance or repair are always on board. Our team is ready to perform at your expectations. The team is licensed and insured by the state of Georgia.
One of the most important ways to maintain the efficiency of your air conditioner is to check on its efficiency periodically throughout the year. In addition to changing your air filters every three months, having a professional heating and cooling professional service your air conditioner before the peak of summer ensures you're not overlooking potential problems. The thorough inspection and tune up of your air conditioner is well worth the low maintenance cost.
Air conditioning makes deep plan buildings feasible, for otherwise they would have to be built narrower or with light wells so that inner spaces received sufficient outdoor air via natural ventilation. Air conditioning also allows buildings to be taller, since wind speed increases significantly with altitude making natural ventilation impractical for very tall buildings.[citation needed] Comfort applications are quite different for various building types and may be categorized as:
We'll help » Can't find a model number? Using a model number is the fastest way to find your part. Shop now » RANGE PARTS FOR EVERY MAJOR BRAND Heating Elements, Ignitors, Cooktops and More. Learn More » A HEALTHY AND HAPPY LAWN Easy Guide To The Best Lawn On The Block. Watch now » Expert repair videos Don’t Worry. With over 3000 how-to videos we’ve got you covered.Learn More » Read More » CUSTOMER TESTIMONIALS Our customers save time, money & become DIY repair experts.
I originally took off one star because of the SNAFU with getting the part ordered.  When Alberto called me on the phone he admitted the person had "gotten busy with other things" and apologized.  THAT was taking the high road and I was impressed by that.  Sadly, for reasons I won't guess at, Alberto has decided to take the low road in his comments and imply that they got the part as quickly as possible.  Well, we called at 2:30 so did someone spend six and a half hours finding the part??  That seems very doubtful.
Service Experts Heating and Air Conditioning was founded with the understanding of offering customers with the most excellent heating and cooling practices in the industry. Since it started, Service Experts in Longmont has been faithful to community, providing the first class HVAC (Heating, Ventilation, Air Conditioning) products and services in the area. If you are interested in more details about your local HVAC leaders, simply dial us at 303-647-5749 or schedule an appointment with us online.
    Second, there are the diagnostics involved as well as the return trip to effect the actual repair. What about the hidden costs such as having the part picked up at the supplier, was this considered? As for the parts manager at our shop having wasted time tracking the part down, it often happens that we have to contact several suppliers to find parts especially during the recent cold spell when so many suppliers were out of stock of even the most common service items due to demand being so high.
The content of this blog is intended for informational purposes only. Renovate America provides no endorsement and makes no representations as to accuracy, reliability, completeness, suitability or validity of any information or content on, distributed through or linked, downloaded or accessed from this site. This blog is subject to the additional terms found at https://www.renovateamerica.com/blog-disclaimer.
The use of CFC as a refrigerant was once common, including the refrigerants R-11 and R-12 (sold under the brand name Freon-12). Freon refrigerants were commonly used during the 20th century in air conditioners due to their superior stability and safety properties. When they are released accidentally or deliberately, these chlorine-bearing refrigerants eventually reach the upper atmosphere.[60] Once the refrigerant reaches the stratosphere, UV radiation from the Sun homolytically cleaves the chlorine-carbon bond, yielding a chlorine radical. These chlorine radicals catalyze the breakdown of ozone into diatomic oxygen, depleting the ozone layer that shields the Earth's surface from strong UV radiation. Each chlorine radical remains active as a catalyst until it binds with another radical, forming a stable molecule and quenching the chain reaction.

With the right equipment and regular maintenance, your heating and cooling systems can pay you back. Our NATE-certified technicians are trained to maintain and repair central air conditioners and heat pumps from Carrier and all other brands. If you are experiencing problems with your furnace or AC system, we’ll make sure that your system is working properly, and we won’t leave until the job is complete and your home is comfortable. In this busy world, we understand the importance of prompt appointment scheduling and reliable service. We even offer 24-hour emergency service and after-hours air conditioner repairs that fit your busy schedule.
In the refrigeration cycle, heat is transported from a colder location to a hotter area. As heat would naturally flow in the opposite direction, work is required to achieve this. A refrigerator is an example of such a system, as it transports the heat out of the interior and into its environment. The refrigerant is used as the medium which absorbs and removes heat from the space to be cooled and subsequently ejects that heat elsewhere.
HVAC equipment is estimated to last about 15 to 20 years. Yet over the years, parts go out and need to be repaired. Heat sensors, exchangers, and ducts can become worn out. Air conditioning motors may need repairing from time to time. For repairs to your heating and air conditioning systems, and even general maintenance, let HomeAdvisor help. Enter your zip code and let us connect you with prescreened HVAC repair services near you.
×