Denver HVAC Repair

We moved into a new home and had issues with the heating ducts in one of the rooms. We called HVAC based on other yelp reviews. Overall, everyone we dealt with were friendly, professional and knowledgeable: From the people on the phone managing the schedule to the those performing the work in our house. The day before the scheduled work we asked if additional work could be done (clothes dryer duct cleaning), which they were able to accommodate. The people working at the house were on time, very polite, took great care to keep the house clean during the entire job and explained everything when they were finished. I will certainly use HVAC again.
Service Experts Heating and Air Conditioning was founded on the basis of providing customers with the best heating and cooling practices in the industry. Since its inception, Service Experts has been dedicated to community, providing the top of the line HVAC products and services in your area. If you want more information about your local HVAC leaders, call us at 866-397-3787 or set up an appointment with us online.
Beacon Plumbing, Heating and Mechanical is a residential and commercial HVAC contractor.  We make heating and air conditioning affordable for Puget Sound area homeowners and business owners.  We are heating and cooling experts.  We are able to install, repair, service and retrofit all HVAC brands.  If your home or business needs heating, ventilation or air conditioning then we are a residential and commercial HVAC contractor that installs the most modern and advanced HVAC technology in the Seattle, WA area. 
Outside of your home is an outdoor unit, which is called a condenser. Inside the condenser is a compressor, a condenser coil, and a large fan. The compressor pumps cool refrigerant to an evaporator coil located either in the air handler or just outside the furnace. The evaporator coil gets really cold so that when the blower or furnace pushes warm air past it, the air is cooled. This cool air is then distributed throughout your home through a series of air ducts. Heat is absorbed by the evaporator coil, which warms the refrigerant moving through the coils. This warm refrigerant is then pumped back outside to the condenser coil, where a giant fan cools it off allowing the warm air to escape. This cycle is repeated until your thermostat detects that your home has reached the temperature you set it to.
Air conditioner equipment power in the U.S. is often described in terms of "tons of refrigeration", with each approximately equal to the cooling power of one short ton (2000 pounds or 907 kilograms) of ice melting in a 24-hour period. The value is defined as 12,000 BTU per hour, or 3517 watts.[32] Residential central air systems are usually from 1 to 5 tons (3.5 to 18 kW) in capacity.
Some service providers may recommend repairs and maintenance tasks that are not needed. A savvy consumer who has researched how an HVAC system works and is familiar with most common maintenance tasks will quickly know the difference between necessary tasks and add-on services that drain the wallet. If a heating or cooling problem occurs, appliance service manuals typically contain troubleshooting tips and other information that may be helpful in identifying or even resolving the problem without calling a repairman. Online HVAC guides may also be helpful to a consumer who wishes to become more familiar with how an HVAC system works and potential signs of disrepair. 
In the case of heated water or steam, piping is used to transport the heat to the rooms. Most modern hot water boiler heating systems have a circulator, which is a pump, to move hot water through the distribution system (as opposed to older gravity-fed systems). The heat can be transferred to the surrounding air using radiators, hot water coils (hydro-air), or other heat exchangers. The radiators may be mounted on walls or installed within the floor to produce floor heat.

Monday the following week, no phone calls, or follow up.  I call to get an update and am told that they cannot install my system because they don't have time.  I ask what does that mean, one year? One week? Until the end of summer they say.  What does that mean I ask?  They say at the end of September.  I say thank you for wasting 1 month of my time.


Even if your air conditioning unit is still working, depending on the type of system in your home today, you could recoup your investment in a new system in as little as three years. However, that doesn't mean that your system needs to be replaced. Furnaces, air conditioners, and other heating and cooling systems have made tremendous gains in efficiency over the past five years, so if you have an older unit, it is worth taking a look at whether or not a repair is the best investment.
An air conditioner’s cooling process produces condensation, which normally flows away from the equipment, causing no problem. If there is a clog in the condensate drain lines or drip pan, or if outdoor humidity levels are high, moisture may back up into your air conditioner. Excess condensation will increase indoor humidity levels and hinder the air conditioner’s performance. It could also cause damage to your air conditioner’s components.
Absorption refrigerator Air barrier Air conditioning Antifreeze Automobile air conditioning Autonomous building Building insulation materials Central heating Central solar heating Chilled beam Chilled water Constant air volume (CAV) Coolant Dedicated outdoor air system (DOAS) Deep water source cooling Demand-controlled ventilation (DCV) Displacement ventilation District cooling District heating Electric heating Energy recovery ventilation (ERV) Firestop Forced-air Forced-air gas Free cooling Heat recovery ventilation (HRV) Hybrid heat Hydronics HVAC Ice storage air conditioning Kitchen ventilation Mixed-mode ventilation Microgeneration Natural ventilation Passive cooling Passive house Radiant heating and cooling system Radiant cooling Radiant heating Radon mitigation Refrigeration Renewable heat Room air distribution Solar air heat Solar combisystem Solar cooling Solar heating Thermal insulation Underfloor air distribution Underfloor heating Vapor barrier Vapor-compression refrigeration (VCRS) Variable air volume (VAV) Variable refrigerant flow (VRF) Ventilation
Low refrigerant charges take away from the life of the compressor. The compressor is cooled from the return refrigerant vapor. When there is a low charge there are fewer vapors to cool the compressor, therefore it runs hotter. Any compressor (or electric motor for that matter) which runs above the recommended temperature range will have a shorter life span and cost more to operate.

"Customer service was great, and the price was in-line with other places, and fast service. We had a whole replacement of the outside and inside. I would have liked to see a better install for the furnace and new thermostat - the new thermostat should have gone where the old one was, and even tho the new furnace was a tight fit, they didn't offer to come back and repair the case molding, or give me a discount on the damage done, and I believe they should have put a disconnect box on the outside of the home, to make it easier for any future repairs needed. Other than that, am very happy with the cooling and heating!"
Per hour service charges are not the only way companies charge their customers. There are also service companies that flat rate their services. Either way, you pay, you want the service and troubleshooting done in a quick and efficient manner with a guarantee. Do your research before selecting a company to provide reliable, honest service to your home. If you know what the problem is then the company can likely give you an estimate over the phone. Some will while some do not. Why? Because they likely want to verify the problem to make sure it is a correct assessment. It can be a complex issue and what you think it is it may not be the problem. So you can expect to pay for a service call and troubleshooting charge. Most HVAC service companies do not give free estimates on repairs.
Are there watermarks on your ceiling? Visible leaks around your outdoor unit? Has your AC system completely stopped working? If you notice any of these signs, it’s in your best interest to call an AC technician to fix the issue before it causes more problems for you, your AC system, and your home. To learn more about potential AC malfunctions and how we fix AC issues, visit our AC Repair page.
The Chartered Institution of Building Services Engineers is a body that covers the essential Service (systems architecture) that allow buildings to operate. It includes the electrotechnical, heating, ventilating, air conditioning, refrigeration and plumbing industries. To train as a building services engineer, the academic requirements are GCSEs (A-C) / Standard Grades (1-3) in Maths and Science, which are important in measurements, planning and theory. Employers will often want a degree in a branch of engineering, such as building environment engineering, electrical engineering or mechanical engineering. To become a full member of CIBSE, and so also to be registered by the Engineering Council UK as a chartered engineer, engineers must also attain an Honours Degree and a master's degree in a relevant engineering subject.
HVACNearYou.com is the number one directory for HVAC service. HVAC service is a must when facing air conditioner or heating issues. With HVAC repair and service, your cooling/heating systems will be up and running before you know it - from central heating and cooling to window units, and all ventilation systems in between, HVAC service and repair can make your units work again. With thousands of HVAC service and repair shops/contractors listed and more added each day, HVACNearYou.com will help you find the most reliable and affordable HVAC service in your area.
Next, consider the age of your unit. Remember, as we mentioned earlier, that the average life of a furnace is around 15 to 20 years. In some cases, during the installation process, your licensed and trained technician will write down the installation date right on the unit. If not, you can check inside the chamber door for a metal identification plate containing the serial and model numbers. You can then call the customer service line of the manufacturer and ask for the manufacture date of the unit.
If your AC doesn’t turn off when room temperature reaches the temperature set on the thermostat, the problem is generally occurring either at the thermostat or in the electrical system that runs the outside condensing unit. You can use the AC’s circuit breaker to shut off the unit, but that should not be a permanent solution—circuit breakers are not designed to be used like light switches.
ABM (NYSE: ABM) is a leading provider of facility solutions with revenues of approximately $5.5 billion and more than 130,000 employees in 350+ offices throughout the United States and various international locations. ABM's comprehensive capabilities include janitorial, electrical & lighting, energy solutions, facilities engineering, HVAC & mechanical, landscape & turf, mission critical solutions and parking, provided through stand-alone or integrated solutions. ABM provides custom facility solutions in urban, suburban and rural areas to properties of all sizes - from schools and commercial buildings to hospitals, data centers, manufacturing plants and airports. ABM Industries Incorporated, which operates through its subsidiaries, was founded in 1909. For more information, visit www.abm.com.

Absolutely horrible service dont show or call within there appointment window, half to blow up the o...wners phone after there appointment window to get any answers why. And then it takes another 2 hours for there tech to get there after you were told it would be only an hour. Horrible customer service even though it was a Saturday and they made the appointment. But the tech was very professional. Never recommend them only had to use them cause of insurance See More


The Refrigeration Loop is a closed system and refrigerant should never have to be added to the unit unless there is a leak. Most residential units use R-22/R410A refrigerant. Prices of R-22/R410A are rising every year as we get closer to the date when refrigerant manufacturers will no longer be able to make R-22/R410A. Phase-out of R-22, an HCFC, begins in 2010 and expected to be complete by 2020.). Furthermore, make sure you ask what the service company charges for R-22 when you are calling an HVAC contractor.

We believe that a quality relationship with an HVAC company goes a long way when it comes to maintaining comfort and air quality in your home. When you call Front Range HVAC for an estimate on a new system or to schedule a repair, you can trust that you’re going to receive top quality service, from honest workers who believe in getting you exactly the right equipment for your home.
A career in this field may require you to meet certain licensing, training, and other requirements that can vary by vocation and state. You should check with your state, local government, and/or licensing board to find out which requirements may be applicable in your state. Click here for contact information on state licensing/regulatory boards and certain professional licensing information.
Whether you’re starting your air conditioner for the first time this year, or a unit isn’t running properly and you need to service an air conditioner, following a few simple steps can save you time and money. While some service jobs should be left to a professional, there are several do-it-yourself fixes you can do to keep your air conditioner cooling all summer long.
When you trust your winter comfort to Edwards Heating & Air, we answer with state-of-the-art technology, NATE-certified technicians, and prompt action.  As a Carrier Factory Authorized Dealer, we specialize in the most proven and sophisticated solutions to home and commercial temperature control.  Through ongoing factory training and strict installation and service procedures, the team from Edwards Heating & Air delivers superior workmanship and superior results.  We ensure your demands for efficiency, reliability, and consistent heating are met, and your expectations for courteous and skilled service are exceeded.  Whether you are in the process of building your dream home, in need of effective heating for your existing home or business, or upgrading your furnace or heat pump, our installation specialists provide informed recommendations, attention to detail, and quick turnaround on your project.  Serving Acworth and the surrounding areas of Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA since 2001, you can count on Edwards Heating & Air for everything from installation and maintenance to emergency repairs.
MacDonald-Miller has developed a unique program to help the Service Department continually evaluate the satisfaction of customers and make ongoing improvements to the level of service provided. Our Customer Experience Commitment encompasses the following elements that help maintain and increase the quality of service delivered by the MacMiller team.

Our services cover a assortment of areas that are all primarily designed to improve your quality of life. Whether that means clean air, reliable air conditioning, a superbly maintained furnace, or saving money by installing a more efficient system, we can make your life in Mableton legitimately better. With one quick phone call, you can have an expert headed out to your home for a free in-home consultation and the start of a new relationship. Or, if you’d rather, schedule an appointment online. 
Air conditioner equipment power in the U.S. is often described in terms of "tons of refrigeration", with each approximately equal to the cooling power of one short ton (2000 pounds or 907 kilograms) of ice melting in a 24-hour period. The value is defined as 12,000 BTU per hour, or 3517 watts.[32] Residential central air systems are usually from 1 to 5 tons (3.5 to 18 kW) in capacity.
Your HVAC professional can also help you verify that your system is properly matched by providing you with an AHRI Certificate of Certified Product Performance upon request. The certificate verifies that the outdoor unit (condenser) and the indoor unit (evaporator) combination has been certified as a matched system by the Air Conditioning, Heating and Refrigeration Institute (AHRI). For higher efficiency systems, this certification may help you obtain a rebate from your utility or local municipality, if you have to replace your unit in whole or in part. Not all areas offer a rebate, but your technician will likely be able to provide information about the certification process. Fees for performing this certification vary, but generally are relatively inexpensive.
Abacus’ licensed Electricians can troubleshoot any electrical problems you may have and replace or repair items such as electrical panels and circuit boards, electric surge protection, LED lighting, ceiling fans, complex electrical wiring or rewiring, backup or standby electric generators and more. Want an annual electrical inspection on all your lighting and electrical systems? Ask about the AMP Plan that can save you up to 15% on electrical repairs. This plan includes many things such as an annual electrical safety check to make sure that your home is safe and working properly for you and your family. Our licensed electricians will make sure that the electricity in your home is running at maximum efficiency.
Perhaps the most sensible way to cool your home is to use your home's heating apparatus. Heat pumps can work in exactly this fashion. This device exchanges warmer and cooler air particles between your home and the outside air, allowing you to create a comfortable environment inside your home without the need of generating your own source of heat and cold. The one major drawback of heat pumps is that they tend to be inadequate in extremely cold or hot temperatures, which Portland essentially never sees. The only reason many homeowners don't have heat pumps in their homes is that they already have a forced air heating system. Thus, the best time to install air conditioning for your home is when your heating system fails.
Should you need to replace an air conditioning unit, Abacus Plumbing recommends Lennox brand of air conditioning and heating systems. Lennox systems offer the highest level of home comfort at the lowest possible cost of operation. Additionally, these systems are praised by consumer publications and meet or exceed all government standards for efficiency. Learn more about installation »
SEER is related to the coefficient of performance (COP) commonly used in thermodynamics and also to the Energy Efficiency Ratio (EER). The EER is the efficiency rating for the equipment at a particular pair of external and internal temperatures, while SEER is calculated over a whole range of external temperatures (i.e., the temperature distribution for the geographical location of the SEER test). SEER is unusual in that it is composed of an Imperial unit divided by an SI unit. The COP is a ratio with the same metric units of energy (joules) in both the numerator and denominator. They cancel out, leaving a dimensionless quantity. Formulas for the approximate conversion between SEER and EER or COP are available.[34]
The contactor (relay) and start/run capacitor(s) (see illustration below) fail most often and are inexpensive. So it’s a safe bet to buy and install those parts right away, especially if your air conditioning service unit is older than five years. The condenser fan motor can also fail, but it runs about $150 — hold off buying that unless you’re sure that’s the culprit.
×