Denver HVAC Repair

CIBSE publishes several guides to HVAC design relevant to the UK market, and also the Republic of Ireland, Australia, New Zealand and Hong Kong. These guides include various recommended design criteria and standards, some of which are cited within the UK building regulations, and therefore form a legislative requirement for major building services works. The main guides are:
An air conditioner’s cooling process produces condensation, which normally flows away from the equipment, causing no problem. If there is a clog in the condensate drain lines or drip pan, or if outdoor humidity levels are high, moisture may back up into your air conditioner. Excess condensation will increase indoor humidity levels and hinder the air conditioner’s performance. It could also cause damage to your air conditioner’s components.
Edwards Heating & Air continues to look for new ways to improve service.  We hire only NATE-certified, extensively experienced, and dedicated professionals.  We offer a wide range of products, from ductless options to heat pumps, furnaces, air conditioners, and air quality systems, guaranteed to answer the most challenging comfort demands.  To maintain your equipment in peak condition, promoting year after year of uninterrupted performance, we offer preventative service plans that are affordable, convenient, and effective.  If you are ever confronted with a malfunction, the team from Edwards Heating & Air is always available, 24 hours a day, 7 days a week, to provide the skilled assistance you need. Through our relationship with Wells Fargo Financial National Bank, we offer flexible financing options with approved credit to facilitate your investment into superior quality heating and cooling.  Our ongoing dedication to your complete satisfaction is evidenced by our complaint-free, A+ rating by the Better Business Bureau.  At Edwards Heating & Air, we do things right, every time.
The performance of vapor compression refrigeration cycles[23] is limited by thermodynamics. These air conditioning and heat pump devices move heat rather than convert it from one form to another, so thermal efficiencies do not appropriately describe the performance of these devices. The Coefficient-of-Performance (COP) measures performance, but this dimensionless measure has not been adopted. Instead, the Energy Efficiency Ratio (EER) has traditionally been used to characterize the performance of many HVAC systems. EER is the Energy Efficiency Ratio based on a 35 °C (95 °F) outdoor temperature. To more accurately describe the performance of air conditioning equipment over a typical cooling season a modified version of the EER, the Seasonal Energy Efficiency Ratio (SEER), or in Europe the ESEER, is used. SEER ratings are based on seasonal temperature averages instead of a constant 35 °C (95 °F) outdoor temperature. The current industry minimum SEER rating is 14 SEER.[24]
James Heating & A/C, Inc offers furnace service appointments that help keep your furnace in tip-top shape and operating efficiently for you all winter long. Whether that’s finding small issues before they become big problems, identifying potential safety hazards or making sure you’re maintaining your manufacturer’s warranty, our experts have you covered. Our trained technicians complete furnace service with care, inspecting a number of components in and around your furnace. In fact, our multi-point inspection can help make sure your system runs smoothly throughout the winter.
The condenser fan moves air across the coil to increase the transfer of heat. It is critical to the system. Obstructing the flow of air will not only reduce efficiency, but can lead to compressor failure. Keep debris and objects away from the coil and fan to allow maximum air flow. Some condenser fan motors have sealed bearings, others need lubrication. Damage to the fan can occur if removed improperly. Have a qualified serviceman handle the lubricating if needed.
Engineers have pointed out some areas where efficiency of the existing hardware could be improved. For example, the fan blades used to move the air are usually stamped from sheet metal, an economical method of manufacture, but as a result they are not aerodynamically efficient. A well-designed blade could reduce electrical power required to move the air by a third.[25]
Serving the entire High Desert and Inland Empire areas - we are about quality service - giving the customer the best options - and delivering what they want. We are a small fully licensed and insured company specializing in residential heating and air conditioning. We are a small fully licensed and insured company specializing in residential and light commercial heating and air conditioning.
The basic concept behind air conditioning is said to have been applied in ancient Egypt, where reeds were hung in windows and were moistened with trickling water. The evaporation of water cooled the air blowing through the window. This process also made the air more humid, which can be beneficial in a dry desert climate. In ancient Rome, water from aqueducts was circulated through the walls of certain houses to cool them. Other techniques in medieval Persia involved the use of cisterns and wind towers to cool buildings during the hot season.[5]

I could not have been more pleased with the responsiveness, considerate employees, workmanship, and follow up. We used three divisions of Bill Howe when we had a flood due to a water heater/T&P gauge, Plumbing, Remediation and Reconstruction. It was timely, reasonably priced and finished with attention to detail. Ashley in the office was always polite and responsive and we could not have been happier under the circumstances.
An air conditioner's filters, coils, and fins require regular maintenance for the unit to function effectively and efficiently throughout its years of service. Neglecting necessary maintenance ensures a steady decline in air conditioning performance while energy use steadily increases. Check out our Energy Saver 101 Infographic: Home Cooling for more ways to help improve your comfort and the efficiency of your air conditioner.
We’ve found that many homes and businesses in Atlanta face significant indoor air quality issues as a result of the seasonal high humidity in our area, which creates conditions ripe for mold and mildew growth in both old and new HVAC systems. Our HVAC technicians can help you determine which strategies will work best for neutralizing airborne particulates in your home, which often involves a combination of filtration methods and ultraviolet light technology that together can help keep your system perpetually free of contaminants. We can also install whole-house dehumidifiers and humidifiers, which can make a huge difference in the amount of work your HVAC unit will have to do to be effective.
Need 24-hour emergency furnace repair? We can provide that too. With our same-day service and live phone and online chat service available 24/7, we make your comfort our greatest priority. Heating and air conditioning should help you live a comfortable life, so let us help you make your home the most comfortable it has ever been. It’s easy, just grab your furnace repair coupon, then simply give us a call at 301-747-3140, chat or schedule an appointment with us online.
If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.
With more than 100 years in existence, Lennox has always delivered industry-leading innovation and technology while preserving stringent durability and reliability standards. The professionals at James Heating & A/C, Inc help bring those standards to Lexington so that you can always have total home comfort. If you’re in the market for a new HVAC system or even if you just have a question about what we offer, give us a call at 336-853-6070. We’d love to hear from you. 
You should also have air ducts cleaned after recent water contamination or water damage to prevent mold; after renovations or remodeling to ensure debris and dust didn’t settle in the vents and ducts; if you are having problems with allergies or asthma; or when you are moving into a newly purchased home, especially if the previous owners smoked or had pets. The National Air Duct Cleaners Association (NADCA) recommends getting your air ducts cleaned every three to five years, or every two to three years in regions where homeowners use their air conditioning and heater for many months of the year, while the EPA suggests homeowners have duct cleaning done as needed.
Circulating refrigerant vapor enters the compressor, where its pressure and temperature are increased. The hot, compressed refrigerant vapor is now at a temperature and pressure at which it can be condensed and is routed through a condenser. Here it is cooled by air flowing across the condenser coils and condensed into a liquid. Thus, the circulating refrigerant removes heat from the system and the heat is carried away by the air. The removal of this heat can be greatly augmented by pouring water over the condenser coils, making it much cooler when it hits the expansion valve.
Imagine that you’re taking your time at breakfast, watching the morning news, when you hear a clunk coming from your furnace room, and the furnace breaks. Do you know who can come out to service the furnace in Tucker? Our NATE-certified team can service any model of furnace or boiler, and they have earned the most important training and certification in the industry. While you can never truly prevent your furnace from breaking down forever, you can avoid the scenario above by remembering to schedule annual furnace maintenance visits. When a furnace is taken care of, it will perform more efficiently and use less energy, and there is a better chance that there could be fewer costly repairs moving forward.
Clean air delivery rate is the amount of clean air an air cleaner provides to a room or space. When determining CADR, the amount of airflow in a space is taken into account. For example, an air cleaner with a flow rate of 100 cfm (cubic feet per minute) and an efficiency of 50% has a CADR of 50 cfm. Along with CADR, filtration performance is very important when it comes to the air in our indoor environment. Filter performance depends on the size of the particle or fiber, the filter packing density and depth and also the air flow rate.[26]
Natural ventilation is a key factor in reducing the spread of airborne illnesses such as tuberculosis, the common cold, influenza and meningitis. Opening doors, windows, and using ceiling fans are all ways to maximize natural ventilation and reduce the risk of airborne contagion. Natural ventilation requires little maintenance and is inexpensive.[19]
At Peachtree Service Experts Heating & Air Conditioning, we understand heating and air conditioning, which is why we back up our work with our 100% Satisfaction Guarantee*. Not only does it demonstrate our confidence that you’ll be happy with the furnace repair we have completed, it holds us to a higher standard, making sure that we continue to provide you with amazing service without fail. When it’s time to handle any heating and cooling question or problem you have, know that you can trust the team at Peachtree Service Experts regardless of what the Atlanta weather brings.
Many homes in Portland don't have air conditioning of any kind. Whether your home is decades old or just a few years, the wisdom is that the moderate climate of Portland will be enough to keep you comfortable. In fact, when building a home, you typically need to request air conditioning installation from your home builder. With an average of only two weeks or so worth of days that hit 90 degrees, many people simply can't justify the expense. Of course, HomeAdvisor does see quite a few Portland air conditioning installation requests, simply because so many homeowners don't have central air. If you've decided it's time to indulge yourself or have recently moved into a Portland home without air conditioning, we can help you find a contractor who will help you with any or all of your A/C needs.
Per hour service charges are not the only way companies charge their customers. There are also service companies that flat rate their services. Either way, you pay, you want the service and troubleshooting done in a quick and efficient manner with a guarantee. Do your research before selecting a company to provide reliable, honest service to your home. If you know what the problem is then the company can likely give you an estimate over the phone. Some will while some do not. Why? Because they likely want to verify the problem to make sure it is a correct assessment. It can be a complex issue and what you think it is it may not be the problem. So you can expect to pay for a service call and troubleshooting charge. Most HVAC service companies do not give free estimates on repairs.

With chilly weather on its way back to Boise, furnace and heating repair may not be the first thing you think about, but maybe it should be. Sure, it’s easy for us to sit here and tell you to schedule annual furnace service, but it’s only because we want to help you avoid a heating breakdown during the coldest day of the year in Boise. Day or night, our HVAC professionals are here to make sure you have a comfortable home, and can help get your furnace back working in no time.
The changing seasons take a toll on your HVAC equipment. Unfortunately, it always seems that your aging furnace gives up in the middle of a cold snap and your AC unit sputters out during the hottest day of summer. These events are more than an annoyance: they can quickly turn into emergencies when your home reaches extreme temperatures. That's when it's time to call in your local ARS®/Rescue Rooter® HVAC specialist, who has the training to get to the root of any heating, ventilation or air conditioning problem quickly.
For over 65 years, Jacobs Heating & Air Conditioning has been a Portland HVAC leader. Providing comprehensive heating, cooling and ventilation services to the Portland, OR and Vancouver, WA areas, our clients consistently praise our timely and professional work. From air conditioning repair to cooling and safety system installs, trust the professionals at Jacobs Heating & Air Conditioning.
With chilly weather on its way back to Boise, furnace and heating repair may not be the first thing you think about, but maybe it should be. Sure, it’s easy for us to sit here and tell you to schedule annual furnace service, but it’s only because we want to help you avoid a heating breakdown during the coldest day of the year in Boise. Day or night, our HVAC professionals are here to make sure you have a comfortable home, and can help get your furnace back working in no time.
The Chartered Institution of Building Services Engineers is a body that covers the essential Service (systems architecture) that allow buildings to operate. It includes the electrotechnical, heating, ventilating, air conditioning, refrigeration and plumbing industries. To train as a building services engineer, the academic requirements are GCSEs (A-C) / Standard Grades (1-3) in Maths and Science, which are important in measurements, planning and theory. Employers will often want a degree in a branch of engineering, such as building environment engineering, electrical engineering or mechanical engineering. To become a full member of CIBSE, and so also to be registered by the Engineering Council UK as a chartered engineer, engineers must also attain an Honours Degree and a master's degree in a relevant engineering subject.
If the air conditioner on your thermostat set low, and you aren't feeling cool air, it could be that debris is blocking the condenser. Check on your system outside and remove any tree branches or leaves from around it. Debris can easily obstruct air flow, so make sure the area around your air conditioning unit is clean and trimmed back. Make sure your filter is clean. A buildup of dirt and dust can cause poor air circulation.
Modern air conditioning systems are not designed to draw air into the room from the outside, they only recirculate the increasingly cool air on the inside. Because this inside air always has some amount of moisture suspended in it, the cooling portion of the process always causes ambient warm water vapor to condense on the cooling coils and to drip from them down onto a catch tray at the bottom of the unit from which it must then be routed outside, usually through a drain hole. As this moisture has no dissolved minerals in it, it will not cause mineral buildup on the coils. This will happen even if the ambient humidity level is low. If ice begins to form on the evaporative fins, it will reduce circulation efficiency and cause the development of more ice, etc. A clean and strong circulatory fan can help prevent this, as will raising the target cool temperature of the unit's thermostat to a point that the compressor is allowed to turn off occasionally. A failing thermistor may also cause this problem. Refrigerators without a defrost cycle may have this same issue. Dust can also cause the fins to begin blocking air flow with the same undesirable result: ice.
If your air ducts have been damaged, you’ll need to replace them. The national average air duct replacement cost is $150-$280, which may not include materials. Factors such as duct material, labor, location of ducts and linear feet of ductwork will all affect your final costs. Labor costs will vary based on how accessible the ducts are and what material your ducts are made of. The least expensive duct material is a flexible, non-metallic ducting that costs approximately $1-$2 per linear foot. Flexible aluminum is generally more expensive and stronger than non-metallic ducting. Stainless steel ducting is the strongest, the least flexible (meaning installing it typically has higher labor rates), and usually the most expensive. An average price for air duct replacement could range between $35 and $55 per linear foot, including basic materials and labor. A typical single-family home has 6-10 duct runs; replacing or installing one duct run could average $150-$250 for labor.
As a Carrier Factory Authorized Dealer, Edwards Heating & Air provides superior quality products and workmanship to home and business owners in Acworth and across Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA.  Our NATE-certified technicians adhere to strict installation and service procedures, and are uniquely qualified to recommend the most cost-effective solutions to meet your exact needs and expectations.  Whether you are in the market for an HVAC system for new construction, a replacement unit, ductless options, heat pumps, or air conditioning, Edwards Heating & Air ensures a refreshingly cool and healthy home and work environment.  Through accurate sizing, precision installation, and conscientious maintenance, we help you enjoy maximum return from your investment and reliable operation, year after year.  For any cooling challenge you may face, the team from Edwards Heating & Air are your problem solvers, and we are always here when you need us, 24 hours a day, 7 days a week.
Should you experience a system breakdown, know that there are a few common causes of summer AC repairs. Below you’ll find a few of the most common ones AC repair technicians face each day throughout the warmer months. Having a better understanding of the troubles your system may face can help you feel more at ease with the AC repair process, and better comprehend the information given to you by your technician.

Your home’s HVAC system is a fine-tuned piece of machinery. Like your car, your system needs regular maintenance and tune-ups to ensure it is running reliably. Manufacturer warranties for most new systems require annual tune-ups, and for good reason: these preventative maintenance measures extend the life of your system by keeping your system running the way it is designed to run.

Heaters exist for various types of fuel, including solid fuels, liquids, and gases. Another type of heat source is electricity, normally heating ribbons composed of high resistance wire (see Nichrome). This principle is also used for baseboard heaters and portable heaters. Electrical heaters are often used as backup or supplemental heat for heat pump systems.
Consequently, this water must exit the air handler—typically through plastic pipe or a drain tube. That drain tube goes directly outside, often terminating near the compressor, or to a floor drain or to a small electric “condensate pump” located by the air handler. Where a condensate pump is used, it connects to a 1/2-inch vinyl or rubber tube that exits outdoors or to a drain.
Modern air conditioning emerged from advances in chemistry during the 19th century, and the first large-scale electrical air conditioning was invented and used in 1902 by England inventor Willis Carrier. The introduction of residential air conditioning in the 1920s helped enable the great migration to the Sun Belt in the United States.[citation needed]
Portland, OR ServicesThe Sash Man Window Repair. Window Replacement & Installation Company - Portland, ORPest Control Contractors Portland, ORPortland, OR Best Foundation RepairPortland, OR Remodeling ContractorAppliance & Refrigeration HospitalPortland, OR Roofing ContractorFurniture Builders Portland, ORNatural Woodcrafters IncPortland, OR HandymanPortland, OR Painter
During a seasonal tune-up, our technicians run diagnostics on every part of your system. We make sure the fans run smoothly, the thermostat is programed to your liking, and that all critical parts are not showing signs of wear. If a component needs replacing, we will replace it for you before it gives out. We’ll even replace the filter for you – one less hassle!
So, whether you need a furnace repair or you’re searching for a new heating and cooling system—or you need a plumbing repair as soon as possible–you can count on our specialists in Longmont. We’re experts in heating system and plumbing repair and providing top-notch heating and plumbing service is what we do best. Call Service Experts 24/7/365 at 303-647-5749 or request an appointment online today, and don’t forget to look at our coupons page for savings on your heating system or plumbing repair service.
As much as half of the energy used in your home goes to heating and cooling. So making smart decisions about your home's heating, ventilating, and air conditioning (HVAC) system can have a big effect on your utility bills — and your comfort. Take these steps to increase the efficiency of your heating and cooling system. For more information, see our Guide to Energy Efficient Heating & Cooling  (708KB).

Central, "all-air" air-conditioning systems (or package systems) with a combined outdoor condenser/evaporator unit are often installed in North American residences, offices, and public buildings, but are difficult to retrofit (install in a building that was not designed to receive it) because of the bulky air ducts required. (Minisplit ductless systems are used in these situations.) Outside of North America, packaged systems are only used in limited applications involving large indoor space such as stadiums, theatres or exhibition halls.

At TML Service Experts Heating & Air Conditioning, we understand heating and air conditioning, which is why we back up our work with our 100% Satisfaction Guarantee*. Not only does it show our confidence that you’ll be happy with the furnace repair we have done, it holds us to a higher standard, making certain that we continue to provide you with amazing service without fail. When it’s time to handle any heating and cooling question or concern you have, know that you can trust the team at TML Service Experts regardless of what the Boise weather brings.

PSNC Energy appliance sales, installation, maintenance, and repair are not a part of the regulated services offered by PSNC Energy and are not in any way sanctioned by the North Carolina Utilities Commission. There is no advantage to customers of PSNC Energy if they buy these products or services from PSNC Energy. A customer does not have to buy such products or services in order to continue to receive the same safe and reliable natural gas service from PSNC Energy.


Some systems include an "economizer mode", which is sometimes called a "free-cooling mode". When economizing, the control system will open (fully or partially) the outside air damper and close (fully or partially) the return air damper. This will cause fresh, outside air to be supplied to the system. When the outside air is cooler than the demanded cool air, this will allow the demand to be met without using the mechanical supply of cooling (typically chilled water or a direct expansion "DX" unit), thus saving energy. The control system can compare the temperature of the outside air vs. return air, or it can compare the enthalpy of the air, as is frequently done in climates where humidity is more of an issue. In both cases, the outside air must be less energetic than the return air for the system to enter the economizer mode.

Engineers have pointed out some areas where efficiency of the existing hardware could be improved. For example, the fan blades used to move the air are usually stamped from sheet metal, an economical method of manufacture, but as a result they are not aerodynamically efficient. A well-designed blade could reduce electrical power required to move the air by a third.[25]
Inside the unit, the air passes over the evaporator coil first, and is cooled and dehumidified. The now dehumidified, cold air then passes over the condenser coil where it is warmed up again. Then the air is released back into the room. The unit produces warm, dehumidified air and can usually be placed freely in the environment (room) that is to be conditioned.
All modern air conditioning systems, even small window package units, are equipped with internal air filters. These are generally of a lightweight gauzy material, and must be replaced or washed as conditions warrant. For example, a building in a high dust environment, or a home with furry pets, will need to have the filters changed more often than buildings without these dirt loads. Failure to replace these filters as needed will contribute to a lower heat exchange rate, resulting in wasted energy, shortened equipment life, and higher energy bills; low air flow can result in iced-over evaporator coils, which can completely stop air flow. Additionally, very dirty or plugged filters can cause overheating during a heating cycle, and can result in damage to the system or even fire.

In the United States, HVAC engineers generally are members of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), EPA Universal CFC certified (for installation and service of CFC HVAC devices), or locally engineer certified such as a Special to Chief Boilers License issued by the state or, in some jurisdictions, the city. ASHRAE is an international technical society for all individuals and organizations interested in HVAC. The Society, organized into regions, chapters, and student branches, allows exchange of HVAC knowledge and experiences for the benefit of the field's practitioners and the public. ASHRAE provides many opportunities to participate in the development of new knowledge via, for example, research and its many technical committees. These committees typically meet twice per year at the ASHRAE Annual and Winter Meetings. A popular product show, the AHR Expo, is held in conjunction with each winter meeting. The Society has approximately 50,000 members and has headquarters in Atlanta, Georgia.
ABM is an EOE (Minority / Female / Veteran / Disability / Gender Identity / Sexual Orientation) and is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 855-350-0226. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis.
The basic concept behind air conditioning is said to have been applied in ancient Egypt, where reeds were hung in windows and were moistened with trickling water. The evaporation of water cooled the air blowing through the window. This process also made the air more humid, which can be beneficial in a dry desert climate. In ancient Rome, water from aqueducts was circulated through the walls of certain houses to cool them. Other techniques in medieval Persia involved the use of cisterns and wind towers to cool buildings during the hot season.[5]
We service and install forced air systems from all manufacturers, including Trane, Burnham, Heil, Rheem, and many more. If your home needs a new system, we will recommend the best system for your needs and budget. If you have a brand preference, we can recommend and provide qualified installation of a system from that company that fits your home’s needs.
Having trouble keeping your home cool? Not cozy enough during the winter? Aire Serv® can help you keep your home comfortable and ensure you enjoy quality air year-round! When it comes to your heating, ventilating, and air conditioning services, our team wants to make sure you can breathe easy by delivering quality air conditioning, heating and furnace repair services at an affordable rate.
HVAC professionals attend to a home's thermal needs as well as air quality. Because of the technical aspects of HVAC work, find out the scope of work your professional can perform. You may only need your heating unit serviced however, if this professional also specializes in energy efficiency, mold assessment, or offer ways for you to save on energy costs, you may want to hire them for future projects. Because some equipment is gas-powered, your professional should be able to answer questions about installing gas lines and permitting.
Wow! These guys rock! I had issues with our fireplace for a while and the last company who "fixed" the issue basically charged me a lot of money and literally left me standing in the cold. Next they said it would cost me over $700 to fix the whole thing and they never came back. Finally I was able to find some good guys to fix the issue. Tony and Paul from HVAC were not only really friendly, they diagnosed the issue really fast and fixed it the same day. And it was 7 times less than what the other company asked for!!! Next time I know who to call! 5 Stars!
1/27/2015 Melissa, we are committed to providing the highest level of service and would like to hear more… Melissa, we are committed to providing the highest level of service and would like to hear more about your personal situation. Please email steve, our Customer Relations Specialist at [email protected] or give him a call at 925-318-4795.  Hopefully, you will give us the opportunity to make this right. Read more
Air conditioners can create a lot of water because they remove moisture from the air. To get rid of this, they have a [usually plastic] drain pipe that comes out of the side of the air handler. Over time, algae can block this pipe and, when it does, the AC won’t work. In fact, some condensate drains have a float switch that won’t let the AC run if water backs-up. Water can also puddle around the unit or flood the area. To deal with condensate problems, please see Air Conditioner Leaks Water, below.
No matter what make or model your air conditioner is, Coolray's skilled AC repair experts can help. From small repairs and routine maintenance to a full air conditioning system replacement, you can trust Coolray for all of your air conditioning needs. If your air conditioner suddenly stopped working, give us a call and we get you back up and running with our 24-hour emergency air conditioning repair service. You can count on our air conditioning repair experts to show up on time, be friendly and personable, and repair your AC right the first time.
James Heating & A/C, Inc offers furnace service appointments that help keep your furnace in tip-top shape and operating efficiently for you all winter long. Whether that’s finding small issues before they become big problems, identifying potential safety hazards or making sure you’re maintaining your manufacturer’s warranty, our experts have you covered. Our trained technicians complete furnace service with care, inspecting a number of components in and around your furnace. In fact, our multi-point inspection can help make sure your system runs smoothly throughout the winter.
Dehumidification (air drying) in an air conditioning system is provided by the evaporator. Since the evaporator operates at a temperature below the dew point, moisture in the air condenses on the evaporator coil tubes. This moisture is collected at the bottom of the evaporator in a pan and removed by piping to a central drain or onto the ground outside.
Through our relationship with Wells Fargo Financial National Bank, Edwards Heating & Air offers a variety of rewarding options for financing your new Carrier product or system with approved credit.  We facilitate your investment in quality solutions to home comfort without straining your monthly budget.  With convenient monthly payments, competitive interest rates, flexible financing terms, and online account management, you can answer an unexpected need, enjoy superior equipment, and take advantage of innovative features that best suit your home and lifestyle.  Carrier financing allows you to save existing funding sources, like a home equity line of credit, credit card or bank account, for other needs or emergencies.  To learn more about financing options, or to hear about special financing promotions, contact Edwards Heating & Air and speak to an informed and helpful member of our team.
Also, have an energy-efficiency professional come to your home and perform an energy assessment. This assessment could be either conducting a walk-through of your home with a clipboard or performing a thorough audit, pressurizing your home with a blower-door test to detect energy leaks. You may qualify for state discounts or rebates to have insulation installed in your home. Some utility companies also subsidize the cost of these energy efficiency assessments.

If you believe that the ac not working or you’re getting little or no cold air, check these three things first. Make sure all the registers in the house are wide open. Then be sure the furnace filter is clean. Then go outside and clean off the condenser coils (Photo 2). If several registers were closed or the filter was clogged, the reduced airflow could have caused the evaporator coil to ice up and stop cooling your home. If you’ve changed the filter and opened all the registers and you’re still not getting airflow at the registers, deice the A-coil. Move the thermostat mode switch from “Cooling” to “Off” and move the fan switch from “Auto” to “On.” Let the blower run for at least 30 minutes or until there’s good airflow at the registers. Then turn the AC back on to test it. If it works for the next 12 hours, you’ve solved the problem.

×