At Sky Heating & Air Conditioning, we understand that HVAC services can really hurt your budget. Many times, you don’t expect to make such large purchases until an emergency arises. We never want you to feel that you cannot afford your comfort and safety. We offer flexible financing options through the Home Project credit card from Wells Fargo, with approved credit. Head over to our financing page to apply, or give us a call for more information!
Some systems include an "economizer mode", which is sometimes called a "free-cooling mode". When economizing, the control system will open (fully or partially) the outside air damper and close (fully or partially) the return air damper. This will cause fresh, outside air to be supplied to the system. When the outside air is cooler than the demanded cool air, this will allow the demand to be met without using the mechanical supply of cooling (typically chilled water or a direct expansion "DX" unit), thus saving energy. The control system can compare the temperature of the outside air vs. return air, or it can compare the enthalpy of the air, as is frequently done in climates where humidity is more of an issue. In both cases, the outside air must be less energetic than the return air for the system to enter the economizer mode.
Refrigeration air conditioning equipment usually reduces the absolute humidity of the air processed by the system. The relatively cold (below the dewpoint) evaporator coil condenses water vapor from the processed air, much like an ice-cold drink will condense water on the outside of a glass. Therefore, water vapor is removed from the cooled air and the relative humidity in the room is lowered. The water is usually sent to a drain or may simply drip onto the ground outdoors. The heat is rejected by the condenser which is located outside of room to be cooled.
Central home air conditioner service systems consist of two major components: a condensing unit that sits outside your house, and the evaporator coil (often referred to as an A-coil) that sits in the plenum of your furnace or air handler. The refrigerant in the A-coil picks up the heat from your home and moves it to the outdoor condensing unit. The condensing unit fan blows outside air through the condensing coil to remove the heat. The condensing unit houses the three parts replaceable by a DIYer: the contactor, the start/run capacitor(s) and the condenser fan motor. The condensing unit also houses the compressor, but only a pro can replace that. The A-coil has no parts that can be serviced by a DIYer.
Our team’s knowledge covers a variety of manufacturers, types of systems, local building codes, and best practices. Each technician goes through 200-plus hours of continuing education and training every year, including weekly training sessions. Whether your HVAC system is complex or small, old or brand new, or located in your basement or garage, our repair technicians can handle it.
"Highly recommend! From the time I contacted them to make an appointment, to them showing up, troubleshooting the issue with my a/c unit, them verifying my warranty and driving to Grapevine to get the part, then back to Fort Worth to install it was LESS than 24 hours. Outstanding service, price and knowledge. I will only use this company from now on. Would give ten stars if possible."
Serving the entire High Desert and Inland Empire areas - we are about quality service - giving the customer the best options - and delivering what they want. We are a small fully licensed and insured company specializing in residential heating and air conditioning. We are a small fully licensed and insured company specializing in residential and light commercial heating and air conditioning.
When you choose Apex Energy, Inc., you ensure the comfort, health, and energy efficiency of your residential homes or commercial space. We proudly help to improve your home, all across Chicago's Western Suburbs. Our team of fully licensed, insured, bonded, and trained technicians can handle any need between installation, replacement, and service. We take the time to address your specific concerns and expectations, and answer with the skilled strategies and meticulous attention to detail that trim operational costs and enhance reliability.
Fast forward 1 year and 1 week and the circuit board that HVAC Service had installed has failed again. They came out and said that it failed from water condensation dripping onto it, so we needed to replace it and reroute the pipes to prevent future water damage. That would cost double what I paid last year. Why didn't they fix the problem last year at the initial repair instead of putting in a circuit board that was bound to fail again?!? They were strongly recommending that the furnace be completely replace for a huge fee to avoid the same thing happening again. I paid $59 for them to tell me they didn't fix it right last year. This didn't feel right, so I sought a second opinion.
When you need prompt, dependable heating or air conditioning repair in Cumming, you can count on Coolray. We have served the Atlanta metro area for more than 50 years and we are staffed with HVAC professionals that are ready to tackle any heating or air conditioning issue you have, 24 hours a day, 7 days a week. Our technicians are licensed, trained, and have the tools and experience to correctly diagnose and repair your air conditioner, furnace, heat pump or HVAC equipment.
Poorly maintained water cooling towers can promote the growth and spread of microorganisms, such as Legionella pneumophila, the infectious agent responsible for Legionnaires' disease, or thermophilic actinomycetes. As long as the cooling tower is kept clean (usually by means of a chlorine treatment), these health hazards can be avoided or reduced. Excessive air conditioning can have a negative effect on skin, causing it to dry out, and can also cause dehydration.
So, whether you need a furnace repair or you’re searching for a new heating and cooling system—or you need a plumbing repair now–you can count on our team in North America. We’re specialists in heating system and plumbing repair and offering exceptional heating and plumbing service is what we do best. Call Service Experts 24/7/365 at 866-397-3787 or request an appointment online today, and don’t forget to visit our coupons page for savings on your heating system or plumbing repair service.
How often you should clean your air ducts depends on your situation. If you or someone in the home has asthma or is acutely allergic to certain airborne materials or pollen, regular duct cleaning may be helpful. The Environmental Protection Agency doesn’t have an official position on the necessity of air duct cleaning unless the ducts have been contaminated by rodents, insects or mold, or you are aware of particles blowing out through the vents. The EPA recommends you have your air ducts cleaned on an as-needed basis. The National Air Duct Cleaners Association (NADCA) suggests having air ducts cleaned every three to five years.
When you schedule air conditioning and heating maintenance with The Home Depot, one of our local, licensed, and insured service providers will come to your house and perform a 28-point inspection on your units. Scheduling two seasonal heating and cooling services per year with The Home Depot is a worthwhile investment that can help identify and fix small issues before they lead to bigger, more expensive repairs.
Focus first on sealing ducts that run through the attic, crawlspace, unheated basement, or garage. Use duct sealant (mastic) or metal-backed (foil) tape to seal the seams and connections of ducts. After sealing the ducts in those spaces, wrap them in insulation to keep them from getting hot in the summer or cold in the winter. Next, look to seal any other ducts that you can access in the heated or cooled part of the house. See our Duct Sealing Fact Sheet (787KB) for more information.
Evaporative coolers tend to feel as if they are not working during times of high humidity, when there is not much dry air with which the coolers can work to make the air as cool as possible for dwelling occupants. Unlike other types of air conditioners, evaporative coolers rely on the outside air to be channeled through cooler pads that cool the air before it reaches the inside of a house through its air duct system; this cooled outside air must be allowed to push the warmer air within the house out through an exhaust opening such as an open door or window. These coolers cost less and are mechanically simple to understand and maintain.
Heat pumps and electric furnaces usually have steam humidifiers to increase output. They are line voltage powered and must be unplugged or disconnected before servicing to avoid injury. With the exception of some mist type humidifiers, all have a reservoir. Stagnant water sitting in the reservoir during the off season can be a breeding ground for bacteria. Turn the water off and clean the humidifier if possible when heating season has ended.
Heaters are appliances whose purpose is to generate heat (i.e. warmth) for the building. This can be done via central heating. Such a system contains a boiler, furnace, or heat pump to heat water, steam, or air in a central location such as a furnace room in a home, or a mechanical room in a large building. The heat can be transferred by convection, conduction, or radiation.