Denver HVAC Repair

BGE HOME HVAC repair technicians are thoroughly trained and certified to work on all major brands of heating and air conditioning equipment. When your system breaks down and needs a heating and air conditioning repair, you want to call someone you can trust. Need air conditioning service in the middle of the night? Emergency heating and cooling HVAC service is available 24 hours a day by calling 888-243-4663.
Compare replacement and repair costs: A new boiler or furnace is a substantial investment, but repair costs can also become costly as well. Not to mention, there’s always the possibility of the same issue occurring again or the need for more work in the future. You may want to replace your heating system if the repairs exceed half of the replacement costs.

"Customer service was great, and the price was in-line with other places, and fast service. We had a whole replacement of the outside and inside. I would have liked to see a better install for the furnace and new thermostat - the new thermostat should have gone where the old one was, and even tho the new furnace was a tight fit, they didn't offer to come back and repair the case molding, or give me a discount on the damage done, and I believe they should have put a disconnect box on the outside of the home, to make it easier for any future repairs needed. Other than that, am very happy with the cooling and heating!"
The performance of vapor compression refrigeration cycles[23] is limited by thermodynamics. These air conditioning and heat pump devices move heat rather than convert it from one form to another, so thermal efficiencies do not appropriately describe the performance of these devices. The Coefficient-of-Performance (COP) measures performance, but this dimensionless measure has not been adopted. Instead, the Energy Efficiency Ratio (EER) has traditionally been used to characterize the performance of many HVAC systems. EER is the Energy Efficiency Ratio based on a 35 °C (95 °F) outdoor temperature. To more accurately describe the performance of air conditioning equipment over a typical cooling season a modified version of the EER, the Seasonal Energy Efficiency Ratio (SEER), or in Europe the ESEER, is used. SEER ratings are based on seasonal temperature averages instead of a constant 35 °C (95 °F) outdoor temperature. The current industry minimum SEER rating is 14 SEER.[24]
Most modern air-conditioning systems feature a dehumidification cycle during which the compressor runs while the fan is slowed as much as possible[citation needed] to reduce the evaporator temperature and therefore condense more water. When the temperature falls below a threshold, both the fan and compressor are shut off to mitigate further temperature drops;[clarification needed] this prevents moisture on the evaporator from being blown back into the room.[citation needed] When the temperature rises again,[clarification needed] the compressor restarts and the fan returns to low speed.
Change the filter: A new filter can cost as little as $20. Since this is the most effective way of maintaining your AC system, there is no reason not to change your filter. Homeowners should change your AC filters whenever it gets dirty. Depending on the filter, you may have to change it once every six months or once every month. Each filter should indicate how long it will last.
So, whether you need a furnace repair or you’re searching for a new heating and cooling system—or you need a plumbing repair as soon as possible–you can count on our specialists in Longmont. We’re experts in heating system and plumbing repair and providing top-notch heating and plumbing service is what we do best. Call Service Experts 24/7/365 at 303-647-5749 or request an appointment online today, and don’t forget to look at our coupons page for savings on your heating system or plumbing repair service.

In 1902, the first modern electrical air conditioning unit was invented by Willis Carrier in Buffalo, New York.[citation needed] After graduating from Cornell University, Carrier found a job at the Buffalo Forge Company. There, he began experimenting with air conditioning as a way to solve an application problem for the Sackett-Wilhelms Lithographing and Publishing Company in Brooklyn, New York. The first air conditioner, designed and built in Buffalo by Carrier, began working on 17 July 1902.[citation needed]
At James Heating & A/C, Inc, heating and cooling isn’t just our job, it’s our passion. We strive to provide you with high quality HVAC service in Lexington. No matter the size of the problem or time of day, you can count on us to get the job done properly. After all, James Heating & A/C, Inc has been working in the community since 1967, bringing comfort to our customers right when they need it.
Some systems include an "economizer mode", which is sometimes called a "free-cooling mode". When economizing, the control system will open (fully or partially) the outside air damper and close (fully or partially) the return air damper. This will cause fresh, outside air to be supplied to the system. When the outside air is cooler than the demanded cool air, this will allow the demand to be met without using the mechanical supply of cooling (typically chilled water or a direct expansion "DX" unit), thus saving energy. The control system can compare the temperature of the outside air vs. return air, or it can compare the enthalpy of the air, as is frequently done in climates where humidity is more of an issue. In both cases, the outside air must be less energetic than the return air for the system to enter the economizer mode.
An air conditioner’s cooling process produces condensation, which normally flows away from the equipment, causing no problem. If there is a clog in the condensate drain lines or drip pan, or if outdoor humidity levels are high, moisture may back up into your air conditioner. Excess condensation will increase indoor humidity levels and hinder the air conditioner’s performance. It could also cause damage to your air conditioner’s components.
At Peachtree Service Experts in Tucker, we recognize that for most people, purchasing a new furnace is a big deal. If you’ve been continually ignoring your furnace, don’t put it off any longer: We can take you through the process of purchasing, installation, and maintenance, because frankly, it’s comforting to work with a team who’s been through the purchase process hundreds of times. You wouldn’t ask a plumber to fix a refrigerator, and the same principle applies for heating and cooling systems. When your service provider is competent and efficient, you’ll save money and increase your peace of mind in one fell swoop.

Central, "all-air" air-conditioning systems (or package systems) with a combined outdoor condenser/evaporator unit are often installed in North American residences, offices, and public buildings, but are difficult to retrofit (install in a building that was not designed to receive it) because of the bulky air ducts required. (Minisplit ductless systems are used in these situations.) Outside of North America, packaged systems are only used in limited applications involving large indoor space such as stadiums, theatres or exhibition halls.
We’re located in Lexington and service the surrounding area, so stop on by if you’re looking for a new furnace or want to set up an appointment to have one of our techs do a consultation at your home and help you figure out which system is ideal for your home. Schedule furnace repair or a furnace service appointment with James Heating & A/C, Inc using our online scheduler, or if you need help more quickly, give us a buzz at 336-853-6070. 
Combined, our people can offer decades worth of HVAC service and installation experience in Tucker, which we bring to every single job we do. Our staff believes wholeheartedly that reliability, passion, and expertise are critical to providing our customers with good service, and we can do that for both residential and commercial clients. For commercial buildings, in which safety and maintenance are key values, we are the best provider for your needs. From weekly safety meetings to provided protective equipment and mandatory site risk assessments, our technicians can install, repair, and maintain all commercial HVAC products under the purview of the very highest safety standards. In addition, we can give you a one-year, 100% Satisfaction Guarantee* on commercial service. Most companies only guarantee their work for the first few months, but we believe that we can, and will, do an exemplary job for all our customers in Tucker.
The summers here in Alexandria can range from almost pleasant to downright brutal. And you know as well as we do that it’s those latter days when your central AC or heat pump will decide to go down! But you needn’t seek solace at the Waterfront or over at Cameron Run Regional Park. The secret to restoring your comfort lies with the certified specialists at HVAC Unlimited!
Central, "all-air" air-conditioning systems (or package systems) with a combined outdoor condenser/evaporator unit are often installed in North American residences, offices, and public buildings, but are difficult to retrofit (install in a building that was not designed to receive it) because of the bulky air ducts required. (Minisplit ductless systems are used in these situations.) Outside of North America, packaged systems are only used in limited applications involving large indoor space such as stadiums, theatres or exhibition halls.
Fall is here and winter right around the corner which means soon you will be using your furnace day in and day out. With that said, you cannot expect your heating system to perform at peak levels and provide you with all the warmth and comfort you need if you do not take time out to schedule routine maintenance or an immediate furnace repair should you discover a problem with your system exists.
“Today Tom Mendoza visited a rental house I own. Again another great visit, he represented himself & Robinson Air in an outstanding manner. Tom was very knowledgeable, professional and courteous. In all the techs I have interacted with from Robinson Air, they continue to show great pride and candor when laying out options. There is no doubt, this is a first class business who work for the customer. Call them first!!! Kudos to Tom and all the Robinson Air team. Thank you.”

The three central functions of heating, ventilation, and air conditioning are interrelated, especially with the need to provide thermal comfort and acceptable indoor air quality within reasonable installation, operation, and maintenance costs. HVAC systems can be used in both domestic and commercial environments. HVAC systems can provide ventilation, and maintain pressure relationships between spaces. The means of air delivery and removal from spaces is known as room air distribution.[3]


This company deserves more than five stars. They didn't just replace my heater and air conditioner, they built me a new system for my house. Going above and beyond is a understatement. Steve's staff were 2 of the nicest workers I've come across in a long time. Friendly, knowledgeable, and very clean. Truly a top rated company. Thanks Steve. Great job.
I needed a replacement for my heater. I called Bill Howe and they promptly fitted me into their schedule. The person who arrived, Laurence C. thoroughly tested my furnace and pointed out the problem. I decided to replace it. They arrived on the day to install it. The two men, Jose Gomez and Javier Diaz promptly went to work. They were clean, efficient and respectful of my home. I would gladly recommend Bill Howe for your heating and plumbing needs. They were great!!​
Ground source, or geothermal, heat pumps are similar to ordinary heat pumps, but instead of transferring heat to or from outside air, they rely on the stable, even temperature of the earth to provide heating and air conditioning. Many regions experience seasonal temperature extremes, which would require large-capacity heating and cooling equipment to heat or cool buildings. For example, a conventional heat pump system used to heat a building in Montana's −70 °F (−57 °C) low temperature or cool a building in the highest temperature ever recorded in the US—134 °F (57 °C) in Death Valley, California, in 1913 would require a large amount of energy due to the extreme difference between inside and outside air temperatures. A few feet below the earth's surface, however, the ground remains at a relatively constant temperature. Utilizing this large source of relatively moderate temperature earth, a heating or cooling system's capacity can often be significantly reduced. Although ground temperatures vary according to latitude, at 6 feet (1.8 m) underground, temperatures generally only range from 45 to 75 °F (7 to 24 °C).
It’s a rare occasion for a problem to arise with your heating or cooling equipment at a convenient time. In fact, we’re not even certain such a time exists! That’s why the team at HVAC Unlimited stands ready to provide complete emergency heating and cooling repairs. No matter the time of day or the day itself, we can be on the way and ready to provide prompt, cost-efficient services to our Alexandria clients.
There is nothing worse than having your air conditioner break in the middle of a long, hot summer. You can ensure your air conditioning unit stays in working order all year long with regular service. Sometimes, however, repairs are necessary whether it’s fixing the evaporator, capacitor, or condenser or recharging the refrigerant. Most air conditioner repairs cost between $163 and $528 with most homeowners reporting that they spend about $344. If you do need a repair, here is some information to help you get it done quickly, professionally, and economically.
Jiffy Lube does not recommend servicing systems with detected leaks or damage. The Jiffy Lube AC service is designed for periodic maintenance rather than AC repair, but rest assured Jiffy Lube can recommend the next steps to be taken to get your AC system up and running. Early detection of leaks or damage to your vehicle AC system can save you time and money, keeping you and everyone in your vehicle cool and worry free.

After my initial meeting with HVAC Service I had really high hopes and thought these guys were going to be my HVAC go to company. However, it did not pan out this way whatsoever. Initial estimate meeting - This was the initial meeting I thought I found the go to company. Alberto was friendly, punctual, and knowledgeable. I asked some very basic questions and Alberto was able to explain the why's and why not's of each of my questions. Overall I felt really comfortable with Alberto and was extremely impressed. Then it goes all downhill..... Alberto said they were busy but could either install on the upcoming Saturday. We were going to be out of town and said unfortunately that day did not work. He then proposed the upcoming Tuesday as a possible solution, but just had to confirm with another appointment. I said great. I will review the estimate and call your office to confirm I want to move forward with the install. Within 1-hour of Alberto leaving (probably more like 30 minutes) I called the office to confirm I wanted to move forward with the install and to please confirm that Tuesday will be the install day. The lady on the phone said that she will get in touch with Alberto and call me back. This was on a Friday. On Monday I had not received a call from HVAC Service so I called to follow up. The lady on the phone said they were not able to secure a crane for Tuesday and that the install would not be taking place. Fine, no problem I understand. Two weeks go by and no phone call from HVAC Service regarding install date, or any update at all. I call them to check in to see if they have put me on the schedule and when I can expect to have the AC installed. You can tell by the discussion I had with the lady on the phone that they completely forgot about me and have not scheduled anything. She says she needs to get in contact with the owner because she has no idea on the availability of the crane. I was told that she would call me back by the end of the day with an update. Surprise, surprise, no phone call. I call to follow up at the end of the next day and she said that she has not been able to get in touch with the owner. By this time, I am starting to get frustrated because I am starting to get the run around. I question her if I am even on the schedule or if they attempted to schedule a crane. She says they are extremely busy and that she does not know. So I say, basically I have waited over 2 weeks and you have not put me on the schedule and I am at the end of the install line. No answer. I tell her to talk to her boss and find out what is happening, and I will think about what direction I want to move in at this point. Monday the following week, no phone calls, or follow up. I call to get an update and am told that they cannot install my system because they don't have time. I ask what does that mean, one year? One week? Until the end of summer they say. What does that mean I ask? They say at the end of September. I say thank you for wasting 1 month of my time. How could they have served me better without serving me? 1. Be honest and let me know as soon as possible that the install was going to be delayed and probably not happen until the end of summer. Don't waste a month of my time. I could have reached out to a different company in the time I was waiting for them. 2. Communicate! the thing that upsets me the most is I was the one making all the calls to them. Not once did they ever call me to say we have not forgot about you, or this is what is happening. 3. Provide recommendations on other contractors who could have helped me once they realized they were too busy. I am pretty disappointed it came to this review because I really liked this company and wanted to do work with them. It is a family run business, and reminded me of the HVAC business my dad owned. Beware once you are the one that has to start calling them for updates, or to follow up; your time is probably best served by calling a different contractor.
Some systems include an "economizer mode", which is sometimes called a "free-cooling mode". When economizing, the control system will open (fully or partially) the outside air damper and close (fully or partially) the return air damper. This will cause fresh, outside air to be supplied to the system. When the outside air is cooler than the demanded cool air, this will allow the demand to be met without using the mechanical supply of cooling (typically chilled water or a direct expansion "DX" unit), thus saving energy. The control system can compare the temperature of the outside air vs. return air, or it can compare the enthalpy of the air, as is frequently done in climates where humidity is more of an issue. In both cases, the outside air must be less energetic than the return air for the system to enter the economizer mode.
From Day 1, Alberto walked us through the process, and present us with a variety of options based our budget for the project. His customer service is the best as he did not oversell any services and did not nudge us towards buying a unit that would stretch our budget. On installation day, HVAC Services sent out a crew of 6-7 guys, all of whom were very polite and kept their work areas clean, and installed the whole system the same day.
Refrigeration air conditioning equipment usually reduces the absolute humidity of the air processed by the system. The relatively cold (below the dewpoint) evaporator coil condenses water vapor from the processed air, much like an ice-cold drink will condense water on the outside of a glass. Therefore, water vapor is removed from the cooled air and the relative humidity in the room is lowered. The water is usually sent to a drain or may simply drip onto the ground outdoors. The heat is rejected by the condenser which is located outside of room to be cooled.

Finally, air conditioning and heating maintenance, provided on a regular schedule, can prevent many air conditioner or heater breakdowns thereby preventing the need for you to call an air conditioning and heating repair person for central air conditioning troubleshooting. Maintenance can save you lots of money in the long run but even so, problems can still occur.


Packaged terminal air conditioner (PTAC) systems are also known as wall-split air conditioning systems.[36] They are ductless systems. PTACs, which are frequently used in hotels, have two separate units (terminal packages), the evaporative unit on the interior and the condensing unit on the exterior, with an opening passing through the wall and connecting them. This minimizes the interior system footprint and allows each room to be adjusted independently. PTAC systems may be adapted to provide heating in cold weather, either directly by using an electric strip, gas, or other heater, or by reversing the refrigerant flow to heat the interior and draw heat from the exterior air, converting the air conditioner into a heat pump. While room air conditioning provides maximum flexibility, when used to cool many rooms at a time it is generally more expensive than central air conditioning.
As we all know, San Diego can get pretty warm in the summer and also quite chilly in the winter. So, in order to avoid discomfort, it is important to ensure your heating and air conditioning systems are working properly beforehand. That’s where our HVAC San Diego professionals come in. Our crew members have both the knowledge and expertise to ensure that every heating and air conditioning unit, no matter the make or model, is running at peak performance.
As a Carrier Factory Authorized Dealer, Edwards Heating & Air provides superior quality products and workmanship to home and business owners in Acworth and across Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA.  Our NATE-certified technicians adhere to strict installation and service procedures, and are uniquely qualified to recommend the most cost-effective solutions to meet your exact needs and expectations.  Whether you are in the market for an HVAC system for new construction, a replacement unit, ductless options, heat pumps, or air conditioning, Edwards Heating & Air ensures a refreshingly cool and healthy home and work environment.  Through accurate sizing, precision installation, and conscientious maintenance, we help you enjoy maximum return from your investment and reliable operation, year after year.  For any cooling challenge you may face, the team from Edwards Heating & Air are your problem solvers, and we are always here when you need us, 24 hours a day, 7 days a week.
All modern air conditioning systems, even small window package units, are equipped with internal air filters. These are generally of a lightweight gauzy material, and must be replaced or washed as conditions warrant. For example, a building in a high dust environment, or a home with furry pets, will need to have the filters changed more often than buildings without these dirt loads. Failure to replace these filters as needed will contribute to a lower heat exchange rate, resulting in wasted energy, shortened equipment life, and higher energy bills; low air flow can result in iced-over evaporator coils, which can completely stop air flow. Additionally, very dirty or plugged filters can cause overheating during a heating cycle, and can result in damage to the system or even fire.
Evaporative coolers tend to feel as if they are not working during times of high humidity, when there is not much dry air with which the coolers can work to make the air as cool as possible for dwelling occupants. Unlike other types of air conditioners, evaporative coolers rely on the outside air to be channeled through cooler pads that cool the air before it reaches the inside of a house through its air duct system; this cooled outside air must be allowed to push the warmer air within the house out through an exhaust opening such as an open door or window.[28] These coolers cost less and are mechanically simple to understand and maintain.
2) Keep your coils clean. The AC coils and fins on the outside of your unit need to be kept clean and clear of obstructions. Leaves and other debris sometimes accumulate around your unit. If obstructions are present, your unit must work harder to function than it should. You can clean your unit with a regular garden hose and a broom. Do not use a pressure washer, as the strong spray could cause harm to your system. A little bit of housekeeping in this regard goes far toward keeping your air conditioner working optimally. 
Regardless of the scope of your project, find out what you need to do to prepare your home for their visit. For example, the HVAC professional will need access to the areas in question and may need access to other mechanical or ventilation points. Make sure pets and children are kept out of the way. Ask if your project will involve removing dry wall or making any other structural changes – you may need to hire a professional drywall contractor to patch up HVAC work. If you are adding a unit that may contribute to carbon monoxide within the home, find out if you need to purchase a carbon monoxide detector.

5) Your air conditioner is short cycling. It is perfectly normal for your air conditioner to cycle on and off to maintain a set temperature throughout your home. However, if you notice that it is turning on and off more frequently than usual and the outside temperature is not particularly warmer than normal, it is possible that your unit is malfunctioning. Short cycling puts extra stress on your air conditioner, and can cause it to fail entirely if not handled quickly. 
Never fails when you have guests! Always a plumbing issue pops up! First time I have called Bill Howe. Shower knob was frozen & we couldn't budge it. Really nice looking & polite young man named Marcus showed up promptly. He proceeded to look at problem. He explained problem & possible options if part was not easily replaceable. Fortunately the faucet was fixed with a replacement part without complications. Great news since the shower is 43 yrs. old!! Experience was very positive & I highly recommend this company!! Young repairman could not have been nicer or more professional. Will definitely recommend them.
In the fall you should prepare your HVAC unit for winter. Turn off your air conditioner’s circuit, then hose it off to remove debris. It must dry completely. Do this when it’s warm enough that there’s no risk of the water freezing. Cover the exposed pipes with foam pipe insulation ($1-$3), and protect your entire unit with a weatherproof cover ($20-$50).
In addition to the information below, see these two articles for the general care and maintenance of your air conditioner: Preparing Your Air Conditioner for Summer and How to Replace Furnace & AC Filters. Most noteworthy, you should replace the filters at least twice a year, before the heating and cooling seasons. For information on furnace problems, please see Furnace Not Working.
Our heating and cooling maintenance plans include: 2 preventative maintenance visits per year (1 heating, 1 cooling), priority service, 15% off repairs, including parts, labor and refrigerant, 20% off diagnostic fees, no overtime charges on emergency service, and a 1-year guarantee on all repairs and modifications, an upgrade over the standard 90-day warranty. Sign up today and have one less thing to worry about in your home!
AC units and thermostats have built-in delay features when they’re shut down and then repowered. The delay can be as long as 10 minutes. And, if you’ve subscribed to an energy-saving device from your local power utility, the unit can take even longer to reset. If you’ve installed the parts shown and reinstalled the disconnect block, repowered the circuit breaker, turned on the switch at the furnace, moved the thermostat to AC mode and lowered the temperature below the indoor temperature, and the unit doesn’t fire up after 30 minutes, it’s time to call a pro.
×