Denver HVAC Repair

1/27/2015 Jim, we are committed to 100% satisfaction so every customer is very important to us.… Jim, we are committed to 100% satisfaction so every customer is very important to us.  Unfortunately, with all companies, there will be times when a customer may feel they have been let down.  If that happens with us, we certainly want to hear from you.  To better address your concerns, please contact Steve, our Customer Relations Specialist, directly by email at [email protected] or give him a call at 925-318-4795. Hopefully we will hear from you soon so that we can promptly understand your issue and address the issue! Thanks Jim Read more

Pay by Experience for an HVAC Service Technician has a positive trend. An entry-level HVAC Service Technician with less than 5 years of experience can expect to earn an average total compensation of $38,000 based on 2,151 salaries provided by anonymous users. Average total compensation includes tips, bonus, and overtime pay. An HVAC Service Technician with mid-career experience which includes employees with 5 to 10 years of experience can expect to earn an average total compensation of $47,000 based on 1,397 salaries. An experienced HVAC Service Technician which includes employees with 10 to 20 years of experience can expect to earn an average total compensation of $53,000 based on 1,643 salaries. An HVAC Service Technician with late-career experience which includes employees with greater than 20 years of experience can expect to earn an average total compensation of $59,000 based on 1,021 salaries.
Tony from HVAC came out on Sunday morning and did a fantastic job of immediately diagnosing the issue, quickly fixing the problem, and honoring the coupons I had. When I initially called on Saturday morning, I had a lot of trouble with their answering service getting their wires crossed with their technicians. However, Tony called me back and made it right. He even pointed out an issue that is in the horizon that I should look at (without charging me extra or telling me I had to fix it right now). Great service!
I originally took off one star because of the SNAFU with getting the part ordered.  When Alberto called me on the phone he admitted the person had "gotten busy with other things" and apologized.  THAT was taking the high road and I was impressed by that.  Sadly, for reasons I won't guess at, Alberto has decided to take the low road in his comments and imply that they got the part as quickly as possible.  Well, we called at 2:30 so did someone spend six and a half hours finding the part??  That seems very doubtful.
They were quick to come out and diagnose the problem with my furnace, but I thought the estimate of $549 a bit high to replace the circuit board. So called around and found Leo's Appliance in Concord that sells appliance parts and the circuit board was only $90.49 - that is the retail cost to me, so I imagine the wholesale cost is a lot less. So BEWARE of this company since they wanted $500!!! to replace the circuit board which is located right in the front of the furnace - extremely easy to access. I hate it that you cannot trust repair companies. So if money is not a concern for you give them a call as they very prompt and professional and others have been happy with their service
It can be hard to make the decision to replace or repair your AC unit. However, in many cases, homeowners call in HVAC professionals to check their units and provide a second opinion. A technician can tell you if there’s plenty of life left in your old air conditioning unit or that it’s time to let it go and get a new one. Your HVAC technician may check out your home’s insulation quality, too. You could increase your system’s effectiveness by improving the insulation.
Next, consider the age of your unit. Remember, as we mentioned earlier, that the average life of a furnace is around 15 to 20 years. In some cases, during the installation process, your licensed and trained technician will write down the installation date right on the unit. If not, you can check inside the chamber door for a metal identification plate containing the serial and model numbers. You can then call the customer service line of the manufacturer and ask for the manufacture date of the unit.
Combined, our people can offer decades worth of HVAC service and installation experience in Tucker, which we bring to every single job we do. Our staff believes wholeheartedly that reliability, passion, and expertise are critical to providing our customers with good service, and we can do that for both residential and commercial clients. For commercial buildings, in which safety and maintenance are key values, we are the best provider for your needs. From weekly safety meetings to provided protective equipment and mandatory site risk assessments, our technicians can install, repair, and maintain all commercial HVAC products under the purview of the very highest safety standards. In addition, we can give you a one-year, 100% Satisfaction Guarantee* on commercial service. Most companies only guarantee their work for the first few months, but we believe that we can, and will, do an exemplary job for all our customers in Tucker.
You should have your air conditioning maintenance done at least once a year, in the spring. Doing it in the spring will allow your technician to repair any damage the unit might have acquired during the winter, and make it ready just in time for the arrival of warmer temperatures. However, it’s best to do maintenance twice a year: in the spring and fall. Sticking to this bi-annual schedule will keep your unit running optimally.
Air changes per hour Bake-out Building envelope Convection Dilution Domestic energy consumption Enthalpy Fluid dynamics Gas compressor Heat pump and refrigeration cycle Heat transfer Humidity Infiltration Latent heat Noise control Outgassing Particulates Psychrometrics Sensible heat Stack effect Thermal comfort Thermal destratification Thermal mass Thermodynamics Vapour pressure of water
Our heating and cooling maintenance plans include: 2 preventative maintenance visits per year (1 heating, 1 cooling), priority service, 15% off repairs, including parts, labor and refrigerant, 20% off diagnostic fees, no overtime charges on emergency service, and a 1-year guarantee on all repairs and modifications, an upgrade over the standard 90-day warranty. Sign up today and have one less thing to worry about in your home!
Our skilled technicians arrive prepared to handle the scope of even complex malfunctions, with all makes and models of heating and cooling equipment, most often resolving the problem on the spot.  For all your HVAC service, repairs, and installations in Livermore, CA, Pleasanton, CA & Dublin, CA, call the team from Miller’s Air Conditioning & Heating!
The condensed, pressurized, and still usually somewhat hot liquid refrigerant is next routed through an expansion valve (often nothing more than a pinhole in the system's copper tubing) where it undergoes an abrupt reduction in pressure. That pressure reduction results in flash evaporation of a part of the liquid refrigerant, greatly lowering its temperature. The cold refrigerant is then routed through the evaporator. A fan blows the interior warm air (which is to be cooled) across the evaporator, causing the liquid part of the cold refrigerant mixture to evaporate as well, further lowering the temperature. The warm air is therefore cooled and is pumped by an exhaust fan/ blower into the room. To complete the refrigeration cycle, the refrigerant vapor is routed back into the compressor. In order for the process to have any efficiency, the cooling/evaporative portion of the system must be separated by some kind of physical barrier from the heating/condensing portion, and each portion must have its own fan to circulate its own "kind" of air (either the hot air or the cool air).
All AC repairs were not created equal. While a new filter could cost as low as $20, a refrigerant leak repair can cost up to $1,600. Just like any aspect of the house, certain repairs will mostly depend on the damage. Clearly, the more serious issues will cost more. That not only means more time for the HVAC pro, but more complexity and materials as well. Sadly, neither come without a hefty markup.
The Chartered Institution of Building Services Engineers is a body that covers the essential Service (systems architecture) that allow buildings to operate. It includes the electrotechnical, heating, ventilating, air conditioning, refrigeration and plumbing industries. To train as a building services engineer, the academic requirements are GCSEs (A-C) / Standard Grades (1-3) in Maths and Science, which are important in measurements, planning and theory. Employers will often want a degree in a branch of engineering, such as building environment engineering, electrical engineering or mechanical engineering. To become a full member of CIBSE, and so also to be registered by the Engineering Council UK as a chartered engineer, engineers must also attain an Honours Degree and a master's degree in a relevant engineering subject.

Before opening the electrical cover on the A/C unit, be sure to shut off all power to the compressor unit and the indoor furnace or air handler, and verify that it is off. Note that this may mean shutting off a circuit breaker that serves the furnace and air handler, and then, near the compressor, pulling out the disconnect block (or shutting off the 220-volt power) to the outdoor compressor.


Ventilating or ventilation (the V in HVAC) is the process of exchanging or replacing air in any space to provide high indoor air quality which involves temperature control, oxygen replenishment, and removal of moisture, odors, smoke, heat, dust, airborne bacteria, carbon dioxide, and other gases. Ventilation removes unpleasant smells and excessive moisture, introduces outside air, keeps interior building air circulating, and prevents stagnation of the interior air.
After one company just took a cursory glance at our A/C and found nothing wrong, I called HVAC. I called them mostly based on Michael W's post on 8/10/14 where he told us the owner, Alberto, took his feedback and took it SERIOUSLY. That speaks VOLUMES to anyone who has been around long enough to know the characteristics of the serious players are and those who are the wannabes.
In variable climates, the system may include a reversing valve that switches from heating in winter to cooling in summer. By reversing the flow of refrigerant, the heat pump refrigeration cycle is changed from cooling to heating or vice versa. This allows a facility to be heated and cooled by a single piece of equipment by the same means, and with the same hardware.
If your compressor doesn’t have an overload button and you hear it humming or buzzing, poke a screwdriver or stick down through the top grille and try to spin the fan blades clockwise. If doing this gives the fan enough of a boost to get it going, the unit has a faulty capacitor that must be replaced. See How to Test and Replace an AC Run Capacitor, above.
The federal government is phasing out Freon to conserve energy across the nation. Because of this, Freon costs are increasing significantly. If your AC unit uses Freon, eventually you’ll need to replace it to make the switch to the new R410A refrigerant. It’s most likely a good time to consider a replacement if your unit is breaking down or has problems associated with needing more Freon.
Evaporative coolers tend to feel as if they are not working during times of high humidity, when there is not much dry air with which the coolers can work to make the air as cool as possible for dwelling occupants. Unlike other types of air conditioners, evaporative coolers rely on the outside air to be channeled through cooler pads that cool the air before it reaches the inside of a house through its air duct system; this cooled outside air must be allowed to push the warmer air within the house out through an exhaust opening such as an open door or window.[28] These coolers cost less and are mechanically simple to understand and maintain.

We are a local, family-owned business that has been serving the Lancaster County area since 1945. For many homeowners, we are their trusted partner for home improvements and repairs, providing certified electrical and plumbing services, home remodeling, and major home appliance sales and service. Our large team of experienced installers, plumbers, electricians, and HVAC repair technicians means you can rely on Brubaker, Inc. to respond quickly for all your home repair needs.
Without proper ventilation, carbon monoxide can be lethal at concentrations of 1000 ppm (0.1%). However, at several hundred ppm, carbon monoxide exposure induces headaches, fatigue, nausea, and vomiting. Carbon monoxide binds with hemoglobin in the blood, forming carboxyhemoglobin, reducing the blood's ability to transport oxygen. The primary health concerns associated with carbon monoxide exposure are its cardiovascular and neurobehavioral effects. Carbon monoxide can cause atherosclerosis (the hardening of arteries) and can also trigger heart attacks. Neurologically, carbon monoxide exposure reduces hand to eye coordination, vigilance, and continuous performance. It can also affect time discrimination.[15]
If your air ducts have been damaged, you’ll need to replace them. The national average air duct replacement cost is $150-$280, which may not include materials. Factors such as duct material, labor, location of ducts and linear feet of ductwork will all affect your final costs. Labor costs will vary based on how accessible the ducts are and what material your ducts are made of. The least expensive duct material is a flexible, non-metallic ducting that costs approximately $1-$2 per linear foot. Flexible aluminum is generally more expensive and stronger than non-metallic ducting. Stainless steel ducting is the strongest, the least flexible (meaning installing it typically has higher labor rates), and usually the most expensive. An average price for air duct replacement could range between $35 and $55 per linear foot, including basic materials and labor. A typical single-family home has 6-10 duct runs; replacing or installing one duct run could average $150-$250 for labor.

Engineers have pointed out some areas where efficiency of the existing hardware could be improved. For example, the fan blades used to move the air are usually stamped from sheet metal, an economical method of manufacture, but as a result they are not aerodynamically efficient. A well-designed blade could reduce electrical power required to move the air by a third.[25]
Since the 1980s, manufacturers of HVAC equipment have been making an effort to make the systems they manufacture more efficient. This was originally driven by rising energy costs, and has more recently been driven by increased awareness of environmental issues. Additionally, improvements to the HVAC system efficiency can also help increase occupant health and productivity.[20] In the US, the EPA has imposed tighter restrictions over the years. There are several methods for making HVAC systems more efficient.

We have been using Bill Howe Plumbing's service for more than 25 years and have been pleasantly surprised at how consistently they perform an excellent service call. We use them for our home and our rental properties, and their dispatchers and technicians have always been the best at problem solving; our tenants have told us how great the service is as well. When we needed air conditioning service, naturally we called Bill Howe first. There's no reason to call anyone else. I know the job will be done right the first time, with fair pricing and professional service.
At James Heating & A/C, Inc, heating and cooling isn’t just our job, it’s our passion. We strive to provide you with high quality HVAC service in Lexington. No matter the size of the problem or time of day, you can count on us to get the job done properly. After all, James Heating & A/C, Inc has been working in the community since 1967, bringing comfort to our customers right when they need it.
If your unit needs more than two pounds or charged more than once a year it is recommended you have a refrigerant leak check done to your system. You most likely have a serious refrigerant leak and it needs to be repaired. Leaking units do not operate efficiently; take their toll on the environment, and can cause serious HVAC mechanical problems in the future. Lastly, a good HVAC service tech will attempt to find the refrigerant leak within the hour’s air conditioning service you are paying for in addition to the refrigerant charge.
Routine maintenance involves replacing or cleaning the filters if so equipped, and keeping the outside air intake free of debris. After years of service the air exchanger will become crusted with grease and dirt that collects during condensation. Removing this accumulation will probably take solvents or degreasers and require opening up the cabinet and compartments.

With the right equipment and regular maintenance, your heating and cooling systems can pay you back. Our NATE-certified technicians are trained to maintain and repair central air conditioners and heat pumps from Carrier and all other brands. If you are experiencing problems with your furnace or AC system, we’ll make sure that your system is working properly, and we won’t leave until the job is complete and your home is comfortable. In this busy world, we understand the importance of prompt appointment scheduling and reliable service. We even offer 24-hour emergency service and after-hours air conditioner repairs that fit your busy schedule.
Central air conditioners are more efficient than room air conditioners. In addition, they are out of the way, quiet, and convenient to operate. To save energy and money, you should try to buy an energy-efficient air conditioner and reduce your central air conditioner’s energy use. In an average air-conditioned home, air conditioning consumes more than 2,000 kilowatt-hours of electricity per year, causing power plants to emit about 3,500 pounds of carbon dioxide and 31 pounds of sulfur dioxide.
If your air conditioner isn’t cooling, or is experiencing another performance issue, shut it off. Don’t continue to operate a malfunctioning air conditioner, as that may worsen the problem at hand. This is one reason we do preventative maintenance checks pre-season – a technician identifies and corrects problems, so you don’t run your system with faulty components, causing more damage.
At TML Service Experts Heating & Air Conditioning, we understand heating and air conditioning, which is why we back up our work with our 100% Satisfaction Guarantee*. Not only does it show our confidence that you’ll be happy with the furnace repair we have done, it holds us to a higher standard, making certain that we continue to provide you with amazing service without fail. When it’s time to handle any heating and cooling question or concern you have, know that you can trust the team at TML Service Experts regardless of what the Boise weather brings.
I have a recurring problem of having to have freon added to my A/C system. I have even replaced both units inside and outside but seem to have the same problem. I believe that it must be in the lines between the outside and inside. Is there anything that can be put into the lines to seal any leaks if this is the problem? If not is it advised that the lines be replaced?
Pay by Experience for an HVAC Service Technician has a positive trend. An entry-level HVAC Service Technician with less than 5 years of experience can expect to earn an average total compensation of $38,000 based on 2,151 salaries provided by anonymous users. Average total compensation includes tips, bonus, and overtime pay. An HVAC Service Technician with mid-career experience which includes employees with 5 to 10 years of experience can expect to earn an average total compensation of $47,000 based on 1,397 salaries. An experienced HVAC Service Technician which includes employees with 10 to 20 years of experience can expect to earn an average total compensation of $53,000 based on 1,643 salaries. An HVAC Service Technician with late-career experience which includes employees with greater than 20 years of experience can expect to earn an average total compensation of $59,000 based on 1,021 salaries.

If you believe that the ac not working or you’re getting little or no cold air, check these three things first. Make sure all the registers in the house are wide open. Then be sure the furnace filter is clean. Then go outside and clean off the condenser coils (Photo 2). If several registers were closed or the filter was clogged, the reduced airflow could have caused the evaporator coil to ice up and stop cooling your home. If you’ve changed the filter and opened all the registers and you’re still not getting airflow at the registers, deice the A-coil. Move the thermostat mode switch from “Cooling” to “Off” and move the fan switch from “Auto” to “On.” Let the blower run for at least 30 minutes or until there’s good airflow at the registers. Then turn the AC back on to test it. If it works for the next 12 hours, you’ve solved the problem.

×