A heating, ventilation and air conditioning (HVAC) service technician starts an appointment with a customer by asking about any problems with the heating, ventilation, and/or air conditioning systems in the client's home or business. From there, the technician will carefully examine the equipment in question to diagnose and troubleshoot the problem. Once the issue is determined, the technician provides the customer with a repair quote and, if authorized, begins to repair or replace defective equipment, mechanical components, or wiring in HVAC systems. An HVAC service technician might also be called upon by a customer to carry out preventative maintenance tasks or inspections to ensure that heating, ventilation, and air conditioning systems continue to run smoothly. A technician should have certification or an associate's degree from a technical or trade school that is accredited by HVAC Excellence, the National Center for Construction Education and Research, or the Partnership for Air Conditioning, Heating, and Refrigeration Accreditation. Formal training programs can last anywhere from six months up to two years. The job involves working with electrical equipment, so it is very important that a technician know exactly what he or she is doing or the job can get very dangerous very quickly. If an education is not in the picture, it is sometimes possible to go through a formal apprenticeship program which can take three to five years and mixes on-the-job experience and training with classroom instruction. Exams for certifications are offered by a number of associations. A license to work as an HVAC technician is required in several states and can be obtained by passing a written test. (Copyright 2018 PayScale.com)
At James Heating & A/C, Inc, heating and cooling isn’t just our job, it’s our passion. We strive to provide you with high quality HVAC service in Lexington. No matter the size of the problem or time of day, you can count on us to get the job done properly. After all, James Heating & A/C, Inc has been working in the community since 1967, bringing comfort to our customers right when they need it.
With winter on its way back to Atlanta, furnace and heating repair may not be the first thing you think about, but maybe it should be. Sure, it’s easy for us to sit here and tell you to arrange annual furnace service, but it’s only because we want to help you avoid a heating breakdown during the coldest day of the month in Atlanta. Day or night, our HVAC experts are here to ensure you have a comfortable home, and can help get your furnace back operating in almost no time.
Air Conditioning Service Repair - No matter what name brand (York, Trane, Carrier, Goodman, Lennox, Rheem) of air conditioning and/or heating unit you purchase some time or the other you will need to have that air conditioning and heating equipment checked for a problem and repaired. Even if you have regular air conditioning maintenance done. While there are air
A dehumidifier is an air-conditioner-like device that controls the humidity of a room or building. It is often employed in basements which have a higher relative humidity because of their lower temperature (and propensity for damp floors and walls). In food retailing establishments, large open chiller cabinets are highly effective at dehumidifying the internal air. Conversely, a humidifier increases the humidity of a building.
Reliable Comfort Heating & Air Conditioning is proud to have earned the distinction of Carrier Factory Authorized Dealer by consistently upholding exacting national standards. Our technicians receive regular training updates, and follow strict installation and service procedures. We utilize sophisticated diagnostic equipment and specialized tools, and our fleet of service trucks are equipped with a broad range of genuine manufacturer’s parts. Through our ongoing commitment to superior service, Reliable Comfort Heating & Air Conditioning has earned a solid reputation across Columbus & Seymour, IN. We are your trusted source for reliable and affordable comfort.
Air conditioners often use a fan to distribute the conditioned air to an occupied space such as a building or a car to improve thermal comfort and indoor air quality. Electric refrigerant-based AC units range from small units that can cool a small bedroom, which can be carried by a single adult, to massive units installed on the roof of office towers that can cool an entire building. The cooling is typically achieved through a refrigeration cycle, but sometimes evaporation or free cooling is used. Air conditioning systems can also be made based on desiccants (chemicals which remove moisture from the air) and subterraneous pipes that can distribute the heated refrigerant to the ground for cooling.
Clean air delivery rate is the amount of clean air an air cleaner provides to a room or space. When determining CADR, the amount of airflow in a space is taken into account. For example, an air cleaner with a flow rate of 100 cfm (cubic feet per minute) and an efficiency of 50% has a CADR of 50 cfm. Along with CADR, filtration performance is very important when it comes to the air in our indoor environment. Filter performance depends on the size of the particle or fiber, the filter packing density and depth and also the air flow rate.
Air conditioning can also be provided by a process called free cooling which uses pumps to circulate a coolant (typically water or a glycol mix) from a cold source, which in turn acts as a heat sink for the energy that is removed from the cooled space. Common storage media are deep aquifers or a natural underground rock mass accessed via a cluster of small-diameter boreholes, equipped with heat exchanger. Some systems with small storage capacity are hybrid systems, using free cooling early in the cooling season, and later employing a heat pump to chill the circulation coming from the storage. The heat pump is added because the temperature of the storage gradually increases during the cooling season, thereby declining its effectiveness.
The manufacture and use of CFCs has been banned or severely restricted due to concerns about ozone depletion (see also Montreal Protocol). In light of these environmental concerns, beginning on November 14, 1994, the U.S. Environmental Protection Agency has restricted the sale, possession and use of refrigerant to only licensed technicians, per rules under sections 608 and 609 of the Clean Air Act.
Sometimes a heating and air conditioning system just needs to be repaired rather than completely replaced. You may need air conditioning repair services if there is leaking around the outside unit, the air coming into the house isn't hot or cool enough, the unit is short-cycling or constantly turning on and off, using the system is consistently resulting in higher-than-normal energy bills, or if there is excessive noise during startup and operation.
We’re located in Pella and service the surrounding area, so feel free to swing by if you’re looking for a new furnace or want to set up an appointment to have one of our techs do a consultation at your home and help you learn which system is ideal for your home. Schedule furnace repair or a furnace service appointment with Van Haaften Plumbing & Heating using our online scheduler, or if you want help more urgently, give us a call at 641-628-3621.
In the fall you should prepare your HVAC unit for winter. Turn off your air conditioner’s circuit, then hose it off to remove debris. It must dry completely. Do this when it’s warm enough that there’s no risk of the water freezing. Cover the exposed pipes with foam pipe insulation ($1-$3), and protect your entire unit with a weatherproof cover ($20-$50).
If your air ducts have been damaged, you’ll need to replace them. The national average air duct replacement cost is $150-$280, which may not include materials. Factors such as duct material, labor, location of ducts and linear feet of ductwork will all affect your final costs. Labor costs will vary based on how accessible the ducts are and what material your ducts are made of. The least expensive duct material is a flexible, non-metallic ducting that costs approximately $1-$2 per linear foot. Flexible aluminum is generally more expensive and stronger than non-metallic ducting. Stainless steel ducting is the strongest, the least flexible (meaning installing it typically has higher labor rates), and usually the most expensive. An average price for air duct replacement could range between $35 and $55 per linear foot, including basic materials and labor. A typical single-family home has 6-10 duct runs; replacing or installing one duct run could average $150-$250 for labor.
Imagine that you’re taking your time at breakfast, watching the morning news, when you hear a clunk coming from your furnace room, and the furnace breaks. Do you know who can come out to service the furnace in Tucker? Our NATE-certified team can service any model of furnace or boiler, and they have earned the most important training and certification in the industry. While you can never truly prevent your furnace from breaking down forever, you can avoid the scenario above by remembering to schedule annual furnace maintenance visits. When a furnace is taken care of, it will perform more efficiently and use less energy, and there is a better chance that there could be fewer costly repairs moving forward.
If you have a good HVAC contractor they should offer an annual preventive maintenance agreement where they will perform semi-annual maintenance, once in the Spring and once in the Fall, to service your heating and cooling system. The typical maintenance agreement usually guarantees the HVAC contractor will provide service and parts at a discount rate if the listed equipment fails. Some contractors will even give you after hours service with no extra overtime charge as is the case with most other customers.
The condensed, pressurized, and still usually somewhat hot liquid refrigerant is next routed through an expansion valve (often nothing more than a pinhole in the system's copper tubing) where it undergoes an abrupt reduction in pressure. That pressure reduction results in flash evaporation of a part of the liquid refrigerant, greatly lowering its temperature. The cold refrigerant is then routed through the evaporator. A fan blows the interior warm air (which is to be cooled) across the evaporator, causing the liquid part of the cold refrigerant mixture to evaporate as well, further lowering the temperature. The warm air is therefore cooled and is pumped by an exhaust fan/ blower into the room. To complete the refrigeration cycle, the refrigerant vapor is routed back into the compressor. In order for the process to have any efficiency, the cooling/evaporative portion of the system must be separated by some kind of physical barrier from the heating/condensing portion, and each portion must have its own fan to circulate its own "kind" of air (either the hot air or the cool air).
HVAC is an important part of residential structures such as single family homes, apartment buildings, hotels and senior living facilities, medium to large industrial and office buildings such as skyscrapers and hospitals, on ships and submarines, and in marine environments, where safe and healthy building conditions are regulated with respect to temperature and humidity, using fresh air from outdoors.
From Day 1, Alberto walked us through the process, and present us with a variety of options based our budget for the project. His customer service is the best as he did not oversell any services and did not nudge us towards buying a unit that would stretch our budget. On installation day, HVAC Services sent out a crew of 6-7 guys, all of whom were very polite and kept their work areas clean, and installed the whole system the same day.
Before selecting the installation location of air conditioner, several main factors need to be considered. First of all, the direction of air flow from the indoor units should not fall on the place of rest or work area. Secondly, there should not be any obstacles on the way of the airflow that might prevent it from covering the space of the premises as much as possible. The outdoor unit must also be located in an open space, otherwise the heat from the house will not be effectively discharged outside and the productivity of the entire system will drop sharply. It is highly advisable to install the air conditioner units in easily accessible places, for further maintenance during operation.