Service Experts Heating and Air Conditioning was built with the understanding of delivering customers with the best heating and cooling practices in the industry. Since its inception, Peachtree Service Experts in Atlanta has been dedicated to our area, offering the first class HVAC (Heating, Ventilation, Air Conditioning) products and services in the area. If you want more specifics about your area HVAC leaders, simply dial us at 678-235-9699 or set up an appointment with us online.
Since the 1980s, manufacturers of HVAC equipment have been making an effort to make the systems they manufacture more efficient. This was originally driven by rising energy costs, and has more recently been driven by increased awareness of environmental issues. Additionally, improvements to the HVAC system efficiency can also help increase occupant health and productivity. In the US, the EPA has imposed tighter restrictions over the years. There are several methods for making HVAC systems more efficient.
The performance of vapor compression refrigeration cycles is limited by thermodynamics. These air conditioning and heat pump devices move heat rather than convert it from one form to another, so thermal efficiencies do not appropriately describe the performance of these devices. The Coefficient-of-Performance (COP) measures performance, but this dimensionless measure has not been adopted. Instead, the Energy Efficiency Ratio (EER) has traditionally been used to characterize the performance of many HVAC systems. EER is the Energy Efficiency Ratio based on a 35 °C (95 °F) outdoor temperature. To more accurately describe the performance of air conditioning equipment over a typical cooling season a modified version of the EER, the Seasonal Energy Efficiency Ratio (SEER), or in Europe the ESEER, is used. SEER ratings are based on seasonal temperature averages instead of a constant 35 °C (95 °F) outdoor temperature. The current industry minimum SEER rating is 14 SEER.
The condenser fan moves air across the coil to increase the transfer of heat. It is critical to the system. Obstructing the flow of air will not only reduce efficiency, but can lead to compressor failure. Keep debris and objects away from the coil and fan to allow maximum air flow. Some condenser fan motors have sealed bearings, others need lubrication. Damage to the fan can occur if removed improperly. Have a qualified serviceman handle the lubricating if needed.
HVACNearYou.com is the number one directory for HVAC service. HVAC service is a must when facing air conditioner or heating issues. With HVAC repair and service, your cooling/heating systems will be up and running before you know it - from central heating and cooling to window units, and all ventilation systems in between, HVAC service and repair can make your units work again. With thousands of HVAC service and repair shops/contractors listed and more added each day, HVACNearYou.com will help you find the most reliable and affordable HVAC service in your area.
ArtCanvas,Framed Art,Mixed Media,Photograph...32162 BathBath Accessories & Sets,Bath Rugs,Bath S...3961 BeddingBed Pillows,Blankets & Throws,Comforter...4144 Floor Care & CleaningBrooms, Mops & Dusters,Vacuums1059 FurnitureAccent Furniture,Baby & Kid's Furniture...8941 Heating, Cooling & Air QualityAir Conditioners,Air Purifiers,Dehumidif...1387 Home AppliancesIrons & Garment Care,Sewing Machines,Sma...4121 Home DecorCandles & Holders,Home Accents,Lamps & L...13870
HVAC professionals in the US can receive training through formal training institutions, where most earn associate degrees. Training for HVAC technicians includes classroom lectures and hands-on tasks, and can be followed by an apprenticeship wherein the recent graduate works alongside a professional HVAC technician for a temporary period. HVAC techs who have been trained can also be certified in areas such as air conditioning, heat pumps, gas heating, and commercial refrigeration.
Believe it or not, the evaporator coils inside the AHU (Air Handling Unit) are freezing. You may notice the refrigerant lines on the condenser or at the AHU are frozen with ice build-up. The frost or ice builds up on the evaporator coils and blocks air flow (low air flow and no cooling are a sign of a low charge). A low refrigerant charge will cause the evaporator coil to operate at or below freezing. Since the coil typically operates below the dew point, it draws condensation out of the air. When the evaporator coil begins operating below freezing all this condensation freezes to the evaporator coil and the unit stops cooling.
Once a diagnosis is made to your air-conditioning and/or heating system, the unit can be repaired, in most situations, with stock HVAC parts off the truck. Sometimes the HVAC part has to be ordered because it is a specialty part that only the HVAC manufacturer of your equipment can provide. If the part can be picked up locally then you can expect to pay for travel time to and from the HVAC parts dealer. It is practically impossible to carry every single HVAC part for every single HVAC breakdown that occurs.
Waiting or performing repairs yourself could cause further damage to your system, resulting in more expensive repairs. If you suspect a problem with your air conditioner, schedule an appointment with a licensed, trained HVAC technician at Service Professor right away. When it comes to safe and reliable electrical service and repair, leave it to the friendly, skilled electricians at Service Professor. Your Satisfaction is 100% Guaranteed!
During the coldest months of winter—even more so in Longmont—a heating system repair is probably not something you want to think about, but it likely will be if you need it on a bone-chilling day. You are lucky though, because Service Experts Heating & Air Conditioning is dedicated to completing expert quality furnace and heat pump repair, maintenance and installation in Longmont. It’s our job to be sure you are left with complete comfort in your home.
Harrisburg, PA appliance repair Appliance repair Myrtle Beach Appliance repair Waterloo Appliance repair Port Richey 6929 S Memorial Dr appliance repairs Appliance repair Schaumburg Appliance Maintenance Book snow blower maintenance appointment Schedule Appointment for HVAC Maintenance Carpet Cleaning Services Air Duct Cleaning Services Handyman Service Riding Mower Maintenance Sears Warranty and Satisfaction Guarantee Heating and Cooling Home Renovation Tulsa Window Replacement Home Kitchen Design Roof Installation & Replacement Service Home Improvement Cabinet refacing & replacement home improvement
Modern air conditioning systems are not designed to draw air into the room from the outside, they only recirculate the increasingly cool air on the inside. Because this inside air always has some amount of moisture suspended in it, the cooling portion of the process always causes ambient warm water vapor to condense on the cooling coils and to drip from them down onto a catch tray at the bottom of the unit from which it must then be routed outside, usually through a drain hole. As this moisture has no dissolved minerals in it, it will not cause mineral buildup on the coils. This will happen even if the ambient humidity level is low. If ice begins to form on the evaporative fins, it will reduce circulation efficiency and cause the development of more ice, etc. A clean and strong circulatory fan can help prevent this, as will raising the target cool temperature of the unit's thermostat to a point that the compressor is allowed to turn off occasionally. A failing thermistor may also cause this problem. Refrigerators without a defrost cycle may have this same issue. Dust can also cause the fins to begin blocking air flow with the same undesirable result: ice.
The first air conditioners and refrigerators employed toxic or flammable gases, such as ammonia, methyl chloride, or propane, that could result in fatal accidents when they leaked. Thomas Midgley, Jr. created the first non-flammable, non-toxic chlorofluorocarbon gas, Freon, in 1928. The name is a trademark name owned by DuPont for any chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC), or hydrofluorocarbon (HFC) refrigerant. The refrigerant names include a number indicating the molecular composition (e.g., R-11, R-12, R-22, R-134A). The blend most used in direct-expansion home and building comfort cooling is an HCFC known as chlorodifluoromethane (R-22).
The manufacture and use of CFCs has been banned or severely restricted due to concerns about ozone depletion (see also Montreal Protocol). In light of these environmental concerns, beginning on November 14, 1994, the U.S. Environmental Protection Agency has restricted the sale, possession and use of refrigerant to only licensed technicians, per rules under sections 608 and 609 of the Clean Air Act.
With our wide range of expert services, affordable pricing, and customer dedication, we are certain to satisfy. This is all to ensure you only need to keep one number in mind for all your heating and cooling solutions. That number is 630-723-7716! Contact us today for new design/installation, replacement, seasonal maintenance, and/or prompt repair of furnaces, boilers, central air conditioners, ductless systems and so much more. After more than thirty years in business, Apex Energy, Inc. knows how to treat you right.
We service and install forced air systems from all manufacturers, including Trane, Burnham, Heil, Rheem, and many more. If your home needs a new system, we will recommend the best system for your needs and budget. If you have a brand preference, we can recommend and provide qualified installation of a system from that company that fits your home’s needs.
Many disconnect blocks contain two cartridge fuses. Check them before you proceed with repairs (Photo 3). A blown fuse is a sign of a failing part inside the condensing unit. So don’t just replace it and think you’ve solved the problem. Instead, replace the parts we show here. Then install new fuses and fire up the unit. If it blows again, call a pro—you’ve got more serious issues.