Denver HVAC Repair

To be honest, an HVAC technician’s work goes beyond more than installation, maintenance and repair. Most people are increasingly spending more time inside the home, so indoor air quality, home energy savings and total comfort have become even more important. There are several choices and solutions when it comes to HVAC systems, and our experts will consult with you every step of the way and work with you to achieve your goals.
All your HVAC needs are addressed, including finding a local heating and air conditioning contractor in your area. We offer information for a variety of brands and products in the HVAC industry, so you can care for your heating and cooling system, or know when to call a licensed HVAC contractor to repair your HVAC system. Get knowledgeable advice from the experts at HVAC.com today!
Gas Furnaces Sequence of Operation | Electronic Ignition Gas Furnace Problems Troubleshooting | How To Light a Pilot Light | Heat Pump Breaker Trips | How Heat Pumps Work | Heat Pump Sequence of Operation | Condenser Fan Motor Repair | Air Conditioner Compressor Troubleshooting | Fuel-Gas Code Overview | SEER Definition | Air Conditioner Reviews | Boiler Reviews | Heat Pump Reviews | Heat Pump Problems | How to Wire a Thermostat | Goodman Heat Pump Reviews | Weil-McLain Boiler Reviews | Rheem Package Unit Reviews | Troubleshooting Broken Thermostats | Trane Versus Carrier Gas Furnaces | Carrier Heat Pump Reviews | Rheem Heat Pump Reviews | Trane Gas Furnace Reviews | Amana Gas Furnace Reviews
Check your filter every month, especially during heavy use months (winter and summer). If the filter looks dirty after a month, change it. At a minimum, change the filter every 3 months. A dirty filter will slow down air flow and make the system work harder to keep you warm or cool — wasting energy. A clean filter will also prevent dust and dirt from building up in the system — leading to expensive maintenance and/or early system failure.
Designed to improve manufacturing process control in a printing plant, Carrier's invention controlled not only temperature but also humidity. Carrier used his knowledge of the heating of objects with steam and reversed the process. Instead of sending air through hot coils, he sent it through cold coils (filled with cold water). The air was cooled, and thereby the amount of moisture in the air could be controlled, which in turn made the humidity in the room controllable. The controlled temperature and humidity helped maintain consistent paper dimensions and ink alignment. Later, Carrier's technology was applied to increase productivity in the workplace, and The Carrier Air Conditioning Company of America was formed to meet rising demand. Over time, air conditioning came to be used to improve comfort in homes and automobiles as well. Residential sales expanded dramatically in the 1950s.[citation needed]
The compressor-based refrigerant systems are air-cooled, meaning they use air to exchange heat, in the same way as a car radiator or typical household air conditioner does. Such a system dehumidifies the air as it cools it. It collects water condensed from the cooled air and produces hot air which must be vented outside the cooled area; doing so transfers heat from the air in the cooled area to the outside air.
Since the 1980s, manufacturers of HVAC equipment have been making an effort to make the systems they manufacture more efficient. This was originally driven by rising energy costs, and has more recently been driven by increased awareness of environmental issues. Additionally, improvements to the HVAC system efficiency can also help increase occupant health and productivity.[20] In the US, the EPA has imposed tighter restrictions over the years. There are several methods for making HVAC systems more efficient.
Although HVAC is executed in individual buildings or other enclosed spaces (like NORAD's underground headquarters), the equipment involved is in some cases an extension of a larger district heating (DH) or district cooling (DC) network, or a combined DHC network. In such cases, the operating and maintenance aspects are simplified and metering becomes necessary to bill for the energy that is consumed, and in some cases energy that is returned to the larger system. For example, at a given time one building may be utilizing chilled water for air conditioning and the warm water it returns may be used in another building for heating, or for the overall heating-portion of the DHC network (likely with energy added to boost the temperature).[4][5][6]

When your heating and cooling system stops working, you need the help of a reliable, experienced, local service professional that can diagnose the problem and repair your air conditioner or furnace at a fair price. You can count on The Home Depot's licensed and insured heating and cooling professionals for all your heaters, air conditioning units, and any ventilation needs.

If so, you may want to consider replacing your entire AC system. After your AC system reaches a certain age, it makes more sense to invest in a new AC system altogether rather than repairing it one piece at a time. To learn more about John Moore’s AC replacement program, our warranty, and the cost-advantages of replacing your AC system, visit our AC Replacement page.
You haven’t had a ductwork inspection in years: According to PG&E, the average home’s ductwork leaks up to 30 percent of its air before it actually reaches your living space. That means you’re still paying for the energy used to cool the air—without getting the relief of a cool home. Hire a technician to come take a look at your system; they can perform what’s called a duct-leakage test, which measures how much air is escaping the system. If it turns out your ducts are faulty or have significant gaps, a technician should be able to seal them up or replace your pipes—meaning you might not need a complete system overhaul. However, keep in mind that modern HVAC units are almost always more efficient thanks to technology advancements. In the end, you have to weigh your options: will you need to perform repairs each month?

Fall is here and winter right around the corner which means soon you will be using your furnace day in and day out. With that said, you cannot expect your heating system to perform at peak levels and provide you with all the warmth and comfort you need if you do not take time out to schedule routine maintenance or an immediate furnace repair should you discover a problem with your system exists.


Never fails when you have guests! Always a plumbing issue pops up! First time I have called Bill Howe. Shower knob was frozen & we couldn't budge it. Really nice looking & polite young man named Marcus showed up promptly. He proceeded to look at problem. He explained problem & possible options if part was not easily replaceable. Fortunately the faucet was fixed with a replacement part without complications. Great news since the shower is 43 yrs. old!! Experience was very positive & I highly recommend this company!! Young repairman could not have been nicer or more professional. Will definitely recommend them.
At Reliable Comfort Heating & Air Conditioning, we combine skilled workmanship with dedicated customer service to earn your complete satisfaction.  Whether you are in need of new HVAC installation, replacement, maintenance, repair, air quality solutions, or duct sealing, we draw from extensive hands-on experience, quality products, and advanced training to maximize value and rewards.
We are service professionals! As licensed contractors and specialists in the field of heating and air conditioning, we have the tools, the equipment, and the experience to keep your equipment running smoothly all year long. If it is emergency service that you need, we are available to assist you! To help reduce service emergencies, we offer service agreements to keep your comfort system running at peak performance.
Two weeks go by and no phone call from HVAC Service regarding install date, or any update at all.  I call them to check in to see if they have put me on the schedule and when I can expect to have the AC installed.    You can tell by the discussion I had with the lady on the phone that they completely forgot about me and have not scheduled anything.  She says she needs to get in contact with the owner because she has no idea on the availability of the crane.  I was told that she would call me back by the end of the day with an update.  Surprise, surprise, no phone call.  
Replacing your old heating and cooling equipment with new, energy-efficient models is a great start. But to make sure that you get the best performance, the new equipment must be properly installed. In fact, improper installation can reduce system efficiency by up to 30 percent - costing you more on your utility bills and possibly shortening the equipment's life. Learn more.
They were quick to come out and diagnose the problem with my furnace, but I thought the estimate of $549 a bit high to replace the circuit board.  So called around and found Leo's Appliance in Concord that sells appliance parts and the circuit board was only $90.49 - that is the retail cost to me, so I imagine the wholesale cost is a lot less.  So BEWARE of this company since they wanted $500!!! to replace the circuit board which is located right in the front of the furnace - extremely easy to access.  I hate it that you cannot trust repair companies.
Finally, air conditioning and heating maintenance, provided on a regular schedule, can prevent many air conditioner or heater breakdowns thereby preventing the need for you to call an air conditioning and heating repair person for central air conditioning troubleshooting. Maintenance can save you lots of money in the long run but even so, problems can still occur.
The changing seasons take a toll on your HVAC equipment. Unfortunately, it always seems that your aging furnace gives up in the middle of a cold snap and your AC unit sputters out during the hottest day of summer. These events are more than an annoyance: they can quickly turn into emergencies when your home reaches extreme temperatures. That's when it's time to call in your local ARS®/Rescue Rooter® HVAC specialist, who has the training to get to the root of any heating, ventilation or air conditioning problem quickly.
When you need prompt, dependable heating or air conditioning repair in Cumming, you can count on Coolray. We have served the Atlanta metro area for more than 50 years and we are staffed with HVAC professionals that are ready to tackle any heating or air conditioning issue you have, 24 hours a day, 7 days a week. Our technicians are licensed, trained, and have the tools and experience to correctly diagnose and repair your air conditioner, furnace, heat pump or HVAC equipment. 
If your air ducts have been damaged, you’ll need to replace them. The national average air duct replacement cost is $150-$280, which may not include materials. Factors such as duct material, labor, location of ducts and linear feet of ductwork will all affect your final costs. Labor costs will vary based on how accessible the ducts are and what material your ducts are made of. The least expensive duct material is a flexible, non-metallic ducting that costs approximately $1-$2 per linear foot. Flexible aluminum is generally more expensive and stronger than non-metallic ducting. Stainless steel ducting is the strongest, the least flexible (meaning installing it typically has higher labor rates), and usually the most expensive. An average price for air duct replacement could range between $35 and $55 per linear foot, including basic materials and labor. A typical single-family home has 6-10 duct runs; replacing or installing one duct run could average $150-$250 for labor.
Our experienced technicians know how best to repair and maintain an HVAC system, keeping your family safe and your system running efficiently. Our team can also identify potential problems, addressing them before they cause serious damage to your system. Instead of attempting a repair yourself, have one of Brubaker Inc.’s trained technicians look at your system for you.
Outside of your home is an outdoor unit, which is called a condenser. Inside the condenser is a compressor, a condenser coil, and a large fan. The compressor pumps cool refrigerant to an evaporator coil located either in the air handler or just outside the furnace. The evaporator coil gets really cold so that when the blower or furnace pushes warm air past it, the air is cooled. This cool air is then distributed throughout your home through a series of air ducts. Heat is absorbed by the evaporator coil, which warms the refrigerant moving through the coils. This warm refrigerant is then pumped back outside to the condenser coil, where a giant fan cools it off allowing the warm air to escape. This cycle is repeated until your thermostat detects that your home has reached the temperature you set it to.
Some systems include an "economizer mode", which is sometimes called a "free-cooling mode". When economizing, the control system will open (fully or partially) the outside air damper and close (fully or partially) the return air damper. This will cause fresh, outside air to be supplied to the system. When the outside air is cooler than the demanded cool air, this will allow the demand to be met without using the mechanical supply of cooling (typically chilled water or a direct expansion "DX" unit), thus saving energy. The control system can compare the temperature of the outside air vs. return air, or it can compare the enthalpy of the air, as is frequently done in climates where humidity is more of an issue. In both cases, the outside air must be less energetic than the return air for the system to enter the economizer mode.
The HVAC industry is a worldwide enterprise, with roles including operation and maintenance, system design and construction, equipment manufacturing and sales, and in education and research. The HVAC industry was historically regulated by the manufacturers of HVAC equipment, but regulating and standards organizations such as HARDI, ASHRAE, SMACNA, ACCA, Uniform Mechanical Code, International Mechanical Code, and AMCA have been established to support the industry and encourage high standards and achievement.

My mom just received service from this company. She paid $609 to have her frion replaced. After two uses the AC stops working. A young rep comes out to the house again and notifies her that her entire AC unit and furnace need to be replace for just shy of ten grand, though when her frion was refilled she was told that her system should last another five years. When they came back to tell her how her entire system needed to be replaced, they were generous enough to offer her a $300 credit on the nearly $10,000 estimate of replacing the entire system that was working fine until they touched it. My best assumption would be that there is a mishap with the system is due to their negligence. Id suggest using another company other than these scam artists. Update: Alberto soon messages me about the negative review telling me how I am wrong and that they are the best mechanical contractors in the Bay Area. Literally told me that I was wrong. Not sure how you can get much more arrogant than that. Stay clear of these clowns.


We pride ourselves on only hiring experts who are qualified at the height of their skill, as well as friendly, approachable, and trustworthy. Past clients have described our technicians as “just good, trustworthy, honest individuals” and “very courteous and very informative as to how my inspection was going...I liked his personality!” Peachtree Service Experts in Mableton makes an effort to pair technicians with families, and it isn’t out of the ordinary to have the same expert servicing your home for years in a row. Relationships between the customer and our company are important to us, and we don’t hire anyone that we wouldn’t want to have working in our own homes.

The selection of the working fluids (refrigerants) has a significant impact not only on the performance of the air conditioners but on the environment as well. Most refrigerants used for air conditioning contribute to global warming, and many also deplete the ozone layer.[59] CFCs, HCFCs, and HFCs are potent greenhouse gases when leaked to the atmosphere.
Air conditioning can also be provided by a process called free cooling which uses pumps to circulate a coolant (typically water or a glycol mix) from a cold source, which in turn acts as a heat sink for the energy that is removed from the cooled space. Common storage media are deep aquifers or a natural underground rock mass accessed via a cluster of small-diameter boreholes, equipped with heat exchanger. Some systems with small storage capacity are hybrid systems, using free cooling early in the cooling season, and later employing a heat pump to chill the circulation coming from the storage. The heat pump is added because the temperature of the storage gradually increases during the cooling season, thereby declining its effectiveness.

Since the 1980s, manufacturers of HVAC equipment have been making an effort to make the systems they manufacture more efficient. This was originally driven by rising energy costs, and has more recently been driven by increased awareness of environmental issues. Additionally, improvements to the HVAC system efficiency can also help increase occupant health and productivity.[20] In the US, the EPA has imposed tighter restrictions over the years. There are several methods for making HVAC systems more efficient.
We'll help » Can't find a model number? Using a model number is the fastest way to find your part. Shop now » RANGE PARTS FOR EVERY MAJOR BRAND Heating Elements, Ignitors, Cooktops and More. Learn More » A HEALTHY AND HAPPY LAWN Easy Guide To The Best Lawn On The Block. Watch now » Expert repair videos Don’t Worry. With over 3000 how-to videos we’ve got you covered.Learn More » Read More » CUSTOMER TESTIMONIALS Our customers save time, money & become DIY repair experts.
Before you service an air conditioner, make sure the unit is turned completely off by unplugging or shutting off the circuit breaker. Then, rake off any debris from the unit and use a soft brush to remove dirt from the outside cover. If the small copper pipe connecting the unit to the house feels hot, the unit’s coils likely needs to be washed. Remove the outside cover, cover the motor and wiring with a plastic sheet, and hose down the fins, coils, and inside of the unit. Finally, replace the cover when you’re done.

This company deserves more than five stars. They didn't just replace my heater and air conditioner, they built me a new system for my house. Going above and beyond is a understatement. Steve's staff were 2 of the nicest workers I've come across in a long time. Friendly, knowledgeable, and very clean. Truly a top rated company. Thanks Steve.   Great job.
Looking to cut down your home heating and cooling costs? Trane TruComfort™ Variable speed systems do just that. Trane TruComfort™ runs at the speed necessary to keep your home continuously comfortable – automatically adjusting up and down within one-half degree of your setting and constantly circulating air. The result? Running at up to 21 SEER (Seasonal Energy Efficiency Ratio) – which means affordable residential heating and air for you.
Jiffy Lube does not recommend servicing systems with detected leaks or damage. The Jiffy Lube AC service is designed for periodic maintenance rather than AC repair, but rest assured Jiffy Lube can recommend the next steps to be taken to get your AC system up and running. Early detection of leaks or damage to your vehicle AC system can save you time and money, keeping you and everyone in your vehicle cool and worry free.

The quality of the air you breathe affects your comfort, health, and productivity.  Whether at home or in the workplace, an ample supply of fresh, clean air is essential to everyday life.  Whatever concerns you may face, Edwards Heating & Air provides proven, cost-effective products to significantly improve Indoor Air Quality.  Our NATE-certified specialists are qualified to analyze your residential or commercial space, make informed recommendations, and implement a strategy specifically targeted at your unique circumstances.  As a Carrier Factory Authorized Dealer, we are extensively trained in leading-edge products that silently and effectively eliminate harmful bacteria, fumes, chemicals, viruses, smoke, and much more.  The installation of a humidifier, ventilator, air filter, or UV lamp will protect the health of your indoor breathing air, maintain a cleaner, more comfortable home, and even reduce energy costs.  Contact the specialists from Edwards Heating & Air for trusted solutions and complete peace of mind.  


Reliable Comfort Heating & Air Conditioning is proud to have earned the distinction of Carrier Factory Authorized Dealer by consistently upholding exacting national standards.  Our technicians receive regular training updates, and follow strict installation and service procedures.  We utilize sophisticated diagnostic equipment and specialized tools, and our fleet of service trucks are equipped with a broad range of genuine manufacturer’s parts.  Through our ongoing commitment to superior service, Reliable Comfort Heating & Air Conditioning has earned a solid reputation across Columbus & Seymour, IN.  We are your trusted source for reliable and affordable comfort.

An air conditioner's filters, coils, and fins require regular maintenance for the unit to function effectively and efficiently throughout its years of service. Neglecting necessary maintenance ensures a steady decline in air conditioning performance while energy use steadily increases. Check out our Energy Saver 101 Infographic: Home Cooling for more ways to help improve your comfort and the efficiency of your air conditioner.
To clean your air conditioner drain, first shut off the power to your unit at both the thermostat and the breaker. Then remove the drain pan. If the pan is full of water, soak up the liquid with a few towels or rags or use a wet vacuum. You can use a solution of water and distilled vinegar, or substitute peroxide for the vinegar, to clean out the drain pipe. Let the pipe sit for a while in the solution and then put all the parts back in place. Once you start using your air conditioner on a regular basis, check it periodically to ensure condensation isn't building up.
After one company just took a cursory glance at our A/C and found nothing wrong, I called HVAC. I called them mostly based on Michael W's post on 8/10/14 where he told us the owner, Alberto, took his feedback and took it SERIOUSLY. That speaks VOLUMES to anyone who has been around long enough to know the characteristics of the serious players are and those who are the wannabes.
Maintaining your air conditioner (HVAC) unit will ensure that it’s ready to properly cool your home all throughout the summer. Keeping your unit in good condition is also important for your wallet: lack of maintenance shortens a unit’s lifespan by 10-15 years, meaning you’ll need to buy a new one sooner. Lack of maintenance also results in a 5% efficiency loss, which results in higher energy bills. 
Beyond changing the air filter on a regular basis, one of the best ways to ensure your home's HVAC system is operating at peak efficiency is to have a qualified professional HVAC contractor tune up the system on a biannual basis. Energy Star recommends scheduling your system tune-up around the beginning of daylight savings time in the fall and its end in the spring. It's an easy way to remember to have your system serviced before the peak heating and cooling seasons. A standard tune-up is likely to cost you between $70 and $100, but it's money well spent. 
Change the filter: A new filter can cost as little as $20. Since this is the most effective way of maintaining your AC system, there is no reason not to change your filter. Homeowners should change your AC filters whenever it gets dirty. Depending on the filter, you may have to change it once every six months or once every month. Each filter should indicate how long it will last.
James Harrison's first mechanical ice-making machine began operation in 1851 on the banks of the Barwon River at Rocky Point in Geelong, Australia. His first commercial ice-making machine followed in 1853, and his patent for an ether vapor compression refrigeration system was granted in 1855. This novel system used a compressor to force the refrigeration gas to pass through a condenser, where it cooled down and liquefied. The liquefied gas then circulated through the refrigeration coils and vaporized again, cooling down the surrounding system. The machine produced 3,000 kilograms (6,600 lb) of ice per day.[citation needed]
This company deserves more than five stars. They didn't just replace my heater and air conditioner, they built me a new system for my house. Going above and beyond is a understatement. Steve's staff were 2 of the nicest workers I've come across in a long time. Friendly, knowledgeable, and very clean. Truly a top rated company. Thanks Steve. Great job.

I have a recurring problem of having to have freon added to my A/C system. I have even replaced both units inside and outside but seem to have the same problem. I believe that it must be in the lines between the outside and inside. Is there anything that can be put into the lines to seal any leaks if this is the problem? If not is it advised that the lines be replaced?


The installment team ARS made numerous attempts to correct the issue over the last several months. They have not found the issue on why my 2018 outside unit and inside unit (4 ton unit) is not cooling the house down. I had the unit for 1 year and in the months of July and August the Nest unit reads 90 degrees from 12 noon to 7pm. My wife and I are very upset with the upgrade unit we purchase from Home Depot.

You should also have air ducts cleaned after recent water contamination or water damage to prevent mold; after renovations or remodeling to ensure debris and dust didn’t settle in the vents and ducts; if you are having problems with allergies or asthma; or when you are moving into a newly purchased home, especially if the previous owners smoked or had pets. The National Air Duct Cleaners Association (NADCA) recommends getting your air ducts cleaned every three to five years, or every two to three years in regions where homeowners use their air conditioning and heater for many months of the year, while the EPA suggests homeowners have duct cleaning done as needed.
×