In very dry climates, evaporative coolers, sometimes referred to as swamp coolers or desert coolers, are popular for improving coolness during hot weather. An evaporative cooler is a device that draws outside air through a wet pad, such as a large sponge soaked with water. The sensible heat of the incoming air, as measured by a dry bulb thermometer, is reduced. The temperature of the incoming air is reduced, but it is also more humid, so the total heat (sensible heat plus latent heat) is unchanged. Some of the sensible heat of the entering air is converted to latent heat by the evaporation of water in the wet cooler pads. If the entering air is dry enough, the results can be quite substantial.
A specialized air conditioner that is used only for dehumidifying is called a dehumidifier. It also uses a refrigeration cycle, but differs from a standard air conditioner in that both the evaporator and the condenser are placed in the same air path. A standard air conditioner transfers heat energy out of the room because its condenser coil releases heat outside. However, since all components of the dehumidifier are in the same room, no heat energy is removed. Instead, the electric power consumed by the dehumidifier remains in the room as heat, so the room is actually heated, just as by an electric heater that draws the same amount of power.
If the AC doesn’t turn off, it may be time to clean the condensing unit. Dirty condenser coils won’t give off heat efficiently and will keep the unit running. Another possibility: The contacts on the outdoor run relay may have welded together—something that can happen over time because of frequent electrical arcing at the relay. Before checking the run relay, turn off the power to the furnace and the condensing unit. Next, disassemble the relay and pry apart the contacts. This should do the trick until you buy a replacement—which you should do soon.
I have a tankless water heater that began to leak. I called around and settled on Bill Howe. Jason came out on Monday and immediately pinpointed the issue. He called the manufacturer, explained what he saw, took a couple of pictures and said he will be back in a couple of days with replacement parts. A few days later Jason called to say he was on his way. He showed up and completed the work in about an hour.
We are large enough to service you with prompt service and best prices, but small enough to provide you with that personalized service you deserve. Our offices serve all of Hillsborough, Pinellas, Pasco, Polk, Sarasota, Manatee, Charlotte, Hernando & Citrus counties. Serving Tampa, St Petersburg, Clearwater, Lakeland, Sarasota, Bradenton, Temple Terrace, Brandon, Apollo Beach, Riverview, Valrico, Lithia, Palm Harbor, Plant City, Lutz, Wesley Chapel, Land o Lakes, Port Richey, Spring Hill, and all surrounding areas.
James Heating & A/C, Inc offers furnace service appointments that help keep your furnace in tip-top shape and operating efficiently for you all winter long. Whether that’s finding small issues before they become big problems, identifying potential safety hazards or making sure you’re maintaining your manufacturer’s warranty, our experts have you covered. Our trained technicians complete furnace service with care, inspecting a number of components in and around your furnace. In fact, our multi-point inspection can help make sure your system runs smoothly throughout the winter.
The myth that most people believe is that if you add more refrigerant to the unit it will cool better. This is only true if the evaporator coil is operating below freezing. The unit must have a balanced charge at the correct refrigerant pressure for the temperature and usually, only an HVAC professional can charge your unit properly. Another misconception about refrigerant is that the unit burns it up and it must be replaced from time to time. This is not true. Furthermore, the refrigerant loop is a closed system and barring any leaks the air conditioning system should never need any refrigerant.
Once a diagnosis is made to your air-conditioning and/or heating system, the unit can be repaired, in most situations, with stock HVAC parts off the truck. Sometimes the HVAC part has to be ordered because it is a specialty part that only the HVAC manufacturer of your equipment can provide. If the part can be picked up locally then you can expect to pay for travel time to and from the HVAC parts dealer. It is practically impossible to carry every single HVAC part for every single HVAC breakdown that occurs.
Energy efficiency can be improved even more in central heating systems by introducing zoned heating. This allows a more granular application of heat, similar to non-central heating systems. Zones are controlled by multiple thermostats. In water heating systems the thermostats control zone valves, and in forced air systems they control zone dampers inside the vents which selectively block the flow of air. In this case, the control system is very critical to maintaining a proper temperature.
When you schedule air conditioning and heating maintenance with The Home Depot, one of our local, licensed, and insured service providers will come to your house and perform a 28-point inspection on your units. Scheduling two seasonal heating and cooling services per year with The Home Depot is a worthwhile investment that can help identify and fix small issues before they lead to bigger, more expensive repairs.
Ground source, or geothermal, heat pumps are similar to ordinary heat pumps, but instead of transferring heat to or from outside air, they rely on the stable, even temperature of the earth to provide heating and air conditioning. Many regions experience seasonal temperature extremes, which would require large-capacity heating and cooling equipment to heat or cool buildings. For example, a conventional heat pump system used to heat a building in Montana's −70 °F (−57 °C) low temperature or cool a building in the highest temperature ever recorded in the US—134 °F (57 °C) in Death Valley, California, in 1913 would require a large amount of energy due to the extreme difference between inside and outside air temperatures. A few feet below the earth's surface, however, the ground remains at a relatively constant temperature. Utilizing this large source of relatively moderate temperature earth, a heating or cooling system's capacity can often be significantly reduced. Although ground temperatures vary according to latitude, at 6 feet (1.8 m) underground, temperatures generally only range from 45 to 75 °F (7 to 24 °C).
Many homes in Portland don't have air conditioning of any kind. Whether your home is decades old or just a few years, the wisdom is that the moderate climate of Portland will be enough to keep you comfortable. In fact, when building a home, you typically need to request air conditioning installation from your home builder. With an average of only two weeks or so worth of days that hit 90 degrees, many people simply can't justify the expense. Of course, HomeAdvisor does see quite a few Portland air conditioning installation requests, simply because so many homeowners don't have central air. If you've decided it's time to indulge yourself or have recently moved into a Portland home without air conditioning, we can help you find a contractor who will help you with any or all of your A/C needs.
I'll give props to HVAC Service for being available quickly and having Saturday and Sunday appointments. Tony fixed our air conditioner and was professional. So why only 2 stars? Because we sent the receipt into our homeowner association to see if we could get reimbursed for some costs, and the property manager said that we paid THREE times more than we should have. We got conned. I advise you to call HVAC Service, but also shop around and get other estimates. Learn from our mistake!
Replacing your old heating and cooling equipment with new, energy-efficient models is a great start. But to make sure that you get the best performance, the new equipment must be properly installed. In fact, improper installation can reduce system efficiency by up to 30 percent - costing you more on your utility bills and possibly shortening the equipment's life. Learn more.
The air conditioner's evaporator coil and condenser coil collect dirt over their months and years of service. A clean filter prevents the evaporator coil from soiling quickly. In time, however, the evaporator coil will still collect dirt. This dirt reduces airflow and insulates the coil, reducing its ability to absorb heat. To avoid this problem, check your evaporator coil every year and clean it as necessary.
I awoke to a smoky smell from my heater and called HVAC service Heating & Air . I called HVAC and I was given an appointment that afternoon. Their technician arrived promptly and was totally knowledgeable and courteous. He had the new motor and starter on his truck and after a total replacement I now have my morning heat back!! I would use them over n over and they were very competitive in their pricing.
With more than 100 years in existence, Lennox has always delivered industry-leading innovation and technology while preserving stringent durability and reliability standards. The professionals at James Heating & A/C, Inc help bring those standards to Lexington so that you can always have total home comfort. If you’re in the market for a new HVAC system or even if you just have a question about what we offer, give us a call at 336-853-6070. We’d love to hear from you.
Second, there are the diagnostics involved as well as the return trip to effect the actual repair. What about the hidden costs such as having the part picked up at the supplier, was this considered? As for the parts manager at our shop having wasted time tracking the part down, it often happens that we have to contact several suppliers to find parts especially during the recent cold spell when so many suppliers were out of stock of even the most common service items due to demand being so high.
An improperly maintained heating and air conditioning is an inefficient heating and air conditioning system. That’s why we provide appointments for annual inspections with our licensed technicians. It’s our goal to make sure that your home is as comfortable and energy-efficient as possible. For inspections, repairs, and service, contact BGE HOME for quality service.