Air conditioner equipment power in the U.S. is often described in terms of "tons of refrigeration", with each approximately equal to the cooling power of one short ton (2000 pounds or 907 kilograms) of ice melting in a 24-hour period. The value is defined as 12,000 BTU per hour, or 3517 watts. Residential central air systems are usually from 1 to 5 tons (3.5 to 18 kW) in capacity.
Abacus’ residential and commercial plumbers are proficient at repairing all kinds of plumbing issues, including gas and electric water heaters, slab leaks, leaky pipes to hydro jetting clogged drains. Many plumbing problems are not DIY types of jobs, call Abacus so one of our licensed plumbers can fix your problem. Our plumbers are not only knowledgeable but their customer service skills will meet or exceed your expectations.
The air conditioner's evaporator coil and condenser coil collect dirt over their months and years of service. A clean filter prevents the evaporator coil from soiling quickly. In time, however, the evaporator coil will still collect dirt. This dirt reduces airflow and insulates the coil, reducing its ability to absorb heat. To avoid this problem, check your evaporator coil every year and clean it as necessary.
Our heating and cooling maintenance plans include: 2 preventative maintenance visits per year (1 heating, 1 cooling), priority service, 15% off repairs, including parts, labor and refrigerant, 20% off diagnostic fees, no overtime charges on emergency service, and a 1-year guarantee on all repairs and modifications, an upgrade over the standard 90-day warranty. Sign up today and have one less thing to worry about in your home!
Heating, ventilation, and air conditioning (HVAC) are one of the most important ways to make certain that your Tucker home is a comfortable place to spend time. If you’re sitting in a hot room during summer, or shivering in your house during the winter, the experience can be strenuous, to say the least. Our job is to make sure that neither of those scenarios happen, which is why we are here for you all day and night.
If you believe that the ac not working or you’re getting little or no cold air, check these three things first. Make sure all the registers in the house are wide open. Then be sure the furnace filter is clean. Then go outside and clean off the condenser coils (Photo 2). If several registers were closed or the filter was clogged, the reduced airflow could have caused the evaporator coil to ice up and stop cooling your home. If you’ve changed the filter and opened all the registers and you’re still not getting airflow at the registers, deice the A-coil. Move the thermostat mode switch from “Cooling” to “Off” and move the fan switch from “Auto” to “On.” Let the blower run for at least 30 minutes or until there’s good airflow at the registers. Then turn the AC back on to test it. If it works for the next 12 hours, you’ve solved the problem.
ISO 16813:2006 is one of the ISO building environment standards. It establishes the general principles of building environment design. It takes into account the need to provide a healthy indoor environment for the occupants as well as the need to protect the environment for future generations and promote collaboration among the various parties involved in building environmental design for sustainability. ISO16813 is applicable to new construction and the retrofit of existing buildings.
Count on R.S. Andrews for all of your residential and commercial air conditioning repair and installation needs. Our team repairs and maintains all the major brands including Trane, Carrier, Lennox, Bryant, American Standard, Goodman and more. Our fleet a fully stocked trucks will arrive ready to go to work. Most of the parts for maintenance or repair are always on board. Our team is ready to perform at your expectations. The team is licensed and insured by the state of Georgia.
Having trouble keeping your home cool? Not cozy enough during the winter? Aire Serv® can help you keep your home comfortable and ensure you enjoy quality air year-round! When it comes to your heating, ventilating, and air conditioning services, our team wants to make sure you can breathe easy by delivering quality air conditioning, heating and furnace repair services at an affordable rate.
Replacing a capacitor is easy. Just take a photo of the wires before disconnecting anything (you may need a reference later on). Then discharge the stored energy in the old capacitor (Photo 4). Use needle-nose pliers to pluck one wire at a time from the old capacitor and snap it onto the corresponding tab of the new capacitor. The female crimp connectors should snap tightly onto the capacitor tabs. Wiggle each connector to see if it’s tight. If it’s not, remove the connector and bend the rounded edges of it so it makes a tighter fit on the tab. When you’ve swapped all the wires, secure the new capacitor (Photo 5).