Denver HVAC Repair

Heating, ventilation, and air conditioning (HVAC[1]) is the technology of indoor and vehicular environmental comfort. Its goal is to provide thermal comfort and acceptable indoor air quality. HVAC system design is a subdiscipline of mechanical engineering, based on the principles of thermodynamics, fluid mechanics and heat transfer. "Refrigeration" is sometimes added to the field's abbreviation, as HVAC&R or HVACR or "ventilation" is dropped, as in HACR (as in the designation of HACR-rated circuit breakers).
Imagine that you’re taking your time at breakfast, watching the morning news, when you hear a clunk coming from your furnace room, and the furnace breaks. Do you know who can come out to service the furnace in Tucker? Our NATE-certified team can service any model of furnace or boiler, and they have earned the most important training and certification in the industry. While you can never truly prevent your furnace from breaking down forever, you can avoid the scenario above by remembering to schedule annual furnace maintenance visits. When a furnace is taken care of, it will perform more efficiently and use less energy, and there is a better chance that there could be fewer costly repairs moving forward.
With the right equipment and regular maintenance, your heating and cooling systems can pay you back. Our NATE-certified technicians are trained to maintain and repair central air conditioners and heat pumps from Carrier and all other brands. If you are experiencing problems with your furnace or AC system, we’ll make sure that your system is working properly, and we won’t leave until the job is complete and your home is comfortable. In this busy world, we understand the importance of prompt appointment scheduling and reliable service. We even offer 24-hour emergency service and after-hours air conditioner repairs that fit your busy schedule.
Free cooling systems can have very high efficiencies, and are sometimes combined with seasonal thermal energy storage so that the cold of winter can be used for summer air conditioning. Common storage mediums are deep aquifers or a natural underground rock mass accessed via a cluster of small-diameter, heat-exchanger-equipped boreholes. Some systems with small storages are hybrids, using free cooling early in the cooling season, and later employing a heat pump to chill the circulation coming from the storage. The heat pump is added-in because the storage acts as a heat sink when the system is in cooling (as opposed to charging) mode, causing the temperature to gradually increase during the cooling season.
Air duct cleaning is done by heating, ventilation and air conditioning (HVAC) professionals. The pros use industrial-strength, truck-mounted vacuums and powerful brushes and hoses to clean inside the metal ducts that make up your forced air heating and cooling system. The Environmental Protection Agency recommends duct cleaning if there is “substantial visible mold growth inside hard surface ducts, ducts that are infested with vermin such as rodents or insects, or ducts that are clogged with excessive amounts of dust and debris and/or particles are actually released into the home from your supply registers.”
Your heating and cooling equipment is vital to your comfort and breakdowns can be stressful, inconvenient and even dangerous. You can rely on the professionals at One Hour Heating and Air Conditioning* for expert service when you need it most. Our highly-trained technicians are available around the clock to meet your heating and cooling needs. We'll install, repair and maintain your HVAC system, keeping it in peak condition. Give us a call when you need to:
As a local HVAC provider, established in 2001, Reliable Comfort Heating & Air Conditioning targets the challenges faced by homeowners in Columbus, Seymour & surrounding areas.  No matter what the weather brings, we answer with products and services that deliver unprecedented energy efficiency, safe operation, ideal comfort, reliability, and sustainability.  We love nothing better than enhancing your home enjoyment while trimming your monthly costs.  Replace outdated equipment with a state-of-the-art furnace, air conditioner, or heat pump, and we’ll make sure your system pays for itself.  Take advantage of a Home Performance Evaluation, Aeroseal Duct Sealing, or enrollment in Comfort Care, and we’ll optimize and protect your indoor environment.  If you’re in need of expert repair, our NATE-certified technicians are always on call, 24 hours a day, 365 days a year.  There’s simply no challenge we can’t turn into a rewarding result.
If you live in a warmer climate, your AC is likely one of the most essential pieces of equipment for your home. The best course is to perform regular routine air conditioner maintenance to ensure its smooth operation during the warmest months of the year. Annual tune-ups by a professional HVAC technician will increase the lifespan of your unit. When repairs are needed, be sure to hire a technician trained and certified in HVAC repair for best results. Following these guidelines will ensure that you are comfortable and cool through the summer season.

5) Check certifications. Many HVAC professionals belong to the Air Conditioning Contractors of America (ACCA) or the Sheet Metal and Air Conditioning Contractors’ National Association (SMACNA). Both sites provide listings of HVAC contractors by area. Look for contractors whose technicians are certified by North American Technician Excellence (NATE) and partnered with ENERGY STAR.

Heaters exist for various types of fuel, including solid fuels, liquids, and gases. Another type of heat source is electricity, normally heating ribbons composed of high resistance wire (see Nichrome). This principle is also used for baseboard heaters and portable heaters. Electrical heaters are often used as backup or supplemental heat for heat pump systems.
No one wants to be stuck in the dead of summer with a broken air conditioner, or in the cold of winter with a broken furnace or boiler. That’s why we’re available any time of day to make your emergency heating and air conditioning repair and get your system up and running as quickly as possible. We’ll show up on time, in uniform and ready to make your HVAC repair right the first time.
Explore HVAC.com for all your heating and air conditioning questions to find reliable answers and resources. We provide informational resources for improving your indoor air quality, finding the best HVAC provider for your home, understanding common heating and cooling terms, and more. Our expert tips help you save energy with your heating and cooling system so you can reduce your energy bills year-round.

The Environmental Protection Agency (EPA) requires that all technicians who open a system containing a controlled refrigerant be certified to do so. There are four levels of certification, one of which is a “universal” certification to allow the HVAC technician to work on any type of equipment containing refrigerant. Your HVAC technician should be certified as “Level II Certified” at a minimum or, preferably, “Universal Certification” to work on your central air conditioner. Obtaining this certification information from your professional HVAC technician may be required in the event you are working with a realtor to sell your home. Costs for certification average $40-$240.
a/c compressor needed replacing. the A Team Mechanical found a way to return the next day to complete the repairs and made sure the system was running effectively. Even put down another concrete base pad to level the a/c unit. They were professionals and straight forward with the services needed. All the other HVAC companies wanted to charge me three time the amount for the services.
BGE HOME HVAC repair technicians are thoroughly trained and certified to work on all major brands of heating and air conditioning equipment. When your system breaks down and needs a heating and air conditioning repair, you want to call someone you can trust. Need air conditioning service in the middle of the night? Emergency heating and cooling HVAC service is available 24 hours a day by calling 888-243-4663.
When you schedule air conditioning and heating maintenance with The Home Depot, one of our local, licensed, and insured service providers will come to your house and perform a 28-point inspection on your units. Scheduling two seasonal heating and cooling services per year with The Home Depot is a worthwhile investment that can help identify and fix small issues before they lead to bigger, more expensive repairs.
Did your furnace suddenly stop working? Call Coolray and relax! Our skilled HVAC technicians can repair all makes and models of furnaces, heat pumps and heating equipment. We serve Cumming, GA with 24-hour heating repair service that you can count on when you need it. Our technicians will arrive on time and will be equipped with the tools necessary to correctly diagnose and repair your heating system. Just need routine maintenance on your furnace? We can do that too. Looking for a new system altogether? We're the HVAC contractor Cumming, Georgia residents can count on for all of their home heating needs!
An HVAC service contract can be a very cost-effective way to make sure your system is properly maintained and to have someone on call when things go wrong. Depending on the amount of services offered, they cost between $150 and $500 per year, but they often include yearly inspections of both your furnace and A/C, discounts on major repairs, and preferred scheduling status when you have problems during the busy season. 

Once a diagnosis is made to your air-conditioning and/or heating system, the unit can be repaired, in most situations, with stock HVAC parts off the truck. Sometimes the HVAC part has to be ordered because it is a specialty part that only the HVAC manufacturer of your equipment can provide. If the part can be picked up locally then you can expect to pay for travel time to and from the HVAC parts dealer. It is practically impossible to carry every single HVAC part for every single HVAC breakdown that occurs.

An air conditioning system, or a standalone air conditioner, provides cooling and humidity control for all or part of a building. Air conditioned buildings often have sealed windows, because open windows would work against the system intended to maintain constant indoor air conditions. Outside, fresh air is generally drawn into the system by a vent into the indoor heat exchanger section, creating positive air pressure. The percentage of return air made up of fresh air can usually be manipulated by adjusting the opening of this vent. Typical fresh air intake is about 10%.
The coil is usually made of copper tubing with aluminum fins, but some manufacturers use aluminum tubing. Its purpose is to transfer heat as rapidly as possible. Pressure inside the coil can exceed 400 psi. during extremely warm weather conditions. The cleaner it is kept, the better it transfers heat. Rinsing with a garden hose occasionally when the unit is not running will help keep it operating efficiently. After many years of use it may be necessary to put special chemicals on to clean it.
They were quick to come out and diagnose the problem with my furnace, but I thought the estimate of $549 a bit high to replace the circuit board.  So called around and found Leo's Appliance in Concord that sells appliance parts and the circuit board was only $90.49 - that is the retail cost to me, so I imagine the wholesale cost is a lot less.  So BEWARE of this company since they wanted $500!!! to replace the circuit board which is located right in the front of the furnace - extremely easy to access.  I hate it that you cannot trust repair companies.

A multi-split system[44] is a conventional split system, which is divided into two parts (evaporator and condenser) and allows cooling or heating of several rooms with one external unit. In the outdoor unit of this air conditioner there is a more powerful compressor, ports for connecting several traces and automation with locking valves for regulating the volume of refrigerant supplied to the indoor units located in the room.
At Reliable Comfort Heating & Air Conditioning, we combine skilled workmanship with dedicated customer service to earn your complete satisfaction.  Whether you are in need of new HVAC installation, replacement, maintenance, repair, air quality solutions, or duct sealing, we draw from extensive hands-on experience, quality products, and advanced training to maximize value and rewards.
This problem can be caused by an air-conditioning system that is too large for the house. If your system has always failed to dehumidify adequately, and it commonly short cycles (turns on and off frequently), an oversized system is ​a likely cause. An oversized system can cool the air so fast that the thermostat shuts off the system before much of the humid air has made its way across the cooling coil to get dehumidified. 
Other than mineral deposits, the most common problem is sediment in the water supply. The float inlet valve has a tiny hole that easily clogs. The float is usually made of plastic, and if cracked will fill with water and sink. The valve will be stuck open and the reservoir will overflow. Use caution when scraping deposits off the float. If the deposits cannot be removed, replace the float or it will sink and cause an overflow.
No matter where you bought your air conditioning system, we can repair it. We have years of experience working with all the best central air conditioner brands such as Kenmore, Carrier. Trane, Goodman, and Rheem. As a result, you can rest assured we’re familiar with your air conditioning system and we have the parts you need to complete a successful air conditioner repair.

Your heating and cooling equipment is vital to your comfort and breakdowns can be stressful, inconvenient and even dangerous. You can rely on the professionals at One Hour Heating and Air Conditioning* for expert service when you need it most. Our highly-trained technicians are available around the clock to meet your heating and cooling needs. We'll install, repair and maintain your HVAC system, keeping it in peak condition. Give us a call when you need to:
All AC repairs were not created equal. While a new filter could cost as low as $20, a refrigerant leak repair can cost up to $1,600. Just like any aspect of the house, certain repairs will mostly depend on the damage. Clearly, the more serious issues will cost more. That not only means more time for the HVAC pro, but more complexity and materials as well. Sadly, neither come without a hefty markup.
A multi-split system[44] is a conventional split system, which is divided into two parts (evaporator and condenser) and allows cooling or heating of several rooms with one external unit. In the outdoor unit of this air conditioner there is a more powerful compressor, ports for connecting several traces and automation with locking valves for regulating the volume of refrigerant supplied to the indoor units located in the room.
Be cautious with companies that offer “whole house air duct cleaning,” urges the NADCA. The company may be using unscrupulous tactics to upsell you once they get started. Before any work begins, always clarify in writing what the job entails and what the cost will be. To protect yourself against fraud, read customer reviews and verify that your HVAC cleaning service has applicable licenses and certifications.

The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clogged, dirty filters block normal airflow and reduce a system's efficiency significantly. With normal airflow obstructed, air that bypasses the filter may carry dirt directly into the evaporator coil and impair the coil's heat-absorbing capacity. Replacing a dirty, clogged filter with a clean one can lower your air conditioner's energy consumption by 5% to 15%.
If your furnace needs to be repaired, you’ll want to find a qualified heating, ventilating and air conditioning (HVAC) repair technician. Each state has its own licensing requirements; some require all HVAC technicians to have an HVAC license, while others only require someone operating an HVAC service and installation company with employees to hold a contractor’s license. For example, in Alabama, the Alabama Board of Heating Air Conditioning, and Refrigeration Contractors regulates licensing, while in Kansas there is no state regulatory body and HVAC licensing can vary by region. For simple furnace repairs like changing out a filter, a trusted handyman can probably handle the job, but a trained professional should be hired for tasks like replacing a gas valve, installing a new inducer fan motor or other critical furnace repair jobs that involve dealing with gas leaks or other dangerous conditions. For more, check out our tips for smart hiring on Thumbtack.
Special chemicals can be used to clean mineral deposits, but one of the safest is vinegar. A 50% mixture of vinegar and water will usually dissolve or help clean away deposits. If the humidifier has a drum with a belt, replacement of the belt at the beginning of the heating season can be the easiest fix if the water has a high mineral content. If the humidifier has screens or is the wick type, some corrosion can occur as well as build up
They were quick to come out and diagnose the problem with my furnace, but I thought the estimate of $549 a bit high to replace the circuit board.  So called around and found Leo's Appliance in Concord that sells appliance parts and the circuit board was only $90.49 - that is the retail cost to me, so I imagine the wholesale cost is a lot less.  So BEWARE of this company since they wanted $500!!! to replace the circuit board which is located right in the front of the furnace - extremely easy to access.  I hate it that you cannot trust repair companies.
If you ever need a repair or maintenance preformed on your Trane air conditioning and heating equipment, we hope you’ll give R.S. Andrews a chance to earn your business. Literally tens of thousands of homeowners have called our hotline for repairs. While you can’t please everyone, we try and have done so in over 99% of the services calls we have performed. It’s a high standard equaled by the quality of Trane air conditioners, furnaces and heat pumps. Call now for service and repair. And don’t forget that we provide plumbing and electrical service and repair, too.
Air conditioning is common in the US, with 88% of new single-family homes constructed in 2011 including air conditioning, ranging from 99% in the South to 62% in the West.[50] In Canada, air conditioning use varies by province. In 2013, 55% of Canadian households reported having an air conditioner, with high use in Manitoba (80%), Ontario (78%), Saskatchewan (67%), and Quebec (54%) and lower use in Prince Edward Island (23%), British Columbia (21%), and Newfoundland and Labrador (9%).[51] In Europe, home air conditioning is generally less common. Southern European countries such as Greece have seen a wide proliferation of home air-conditioning units in recent years.[52] In another southern European country, Malta, it is estimated that around 55% of households have an air conditioner installed.[53] In India AC sales have dropped by 40%[clarification needed] due to higher costs and stricter energy efficiency regulations.[54]

"Our Pro was the most courteous and informative gentleman that we have had the pleasure to work with, was great. He let us know immediately what the problem was and what the cost to fix it would be. Also, he let us know how to maintain and extend the life of our washer. He was very personable and made us very comfortable with the process. We would have him back in a heartbeat if anything ever goes wrong again. It was the best experience we have ever had with a appliance repair service."
×