Denver HVAC Repair

BIG THANK YOU for being honest, and advising us that for some reason the fuse/switch was in the reverse position so the AC unit would not properly turn on.   The unit turned back on immediately, and began cooling the house.   And then providing advice that the AC/Heating system needed some TLC, and giving us options to save money by purchasing a maintenance plan that included the filters plus cleaning services since we were already being charged for the service today.
Heaters are appliances whose purpose is to generate heat (i.e. warmth) for the building. This can be done via central heating. Such a system contains a boiler, furnace, or heat pump to heat water, steam, or air in a central location such as a furnace room in a home, or a mechanical room in a large building. The heat can be transferred by convection, conduction, or radiation.
Are you considering whether you need to replace your home’s central heating, ventilation, and air conditioning unit—commonly known as your HVAC system? As a general rule, if your existing HVAC system is more than 15 years old, it’s only a matter of time before it starts to cost more to maintain than it would to replace it with a new system. In addition to higher energy bills brought on by a system that can no longer function at peak efficiency, repair costs will also start to add up as parts are replaced and the ventilation system undergoes major overhauls.
When central air conditioning service fails during a heat spell, you may have to wait days for an HVAC repair technician or a ac contractor to show up, and you’ll probably pay at least several hundred for the repair. But if you’re comfortable working around electricity and are willing to spend about $50 on parts, you can probably repair your air conditioning service yourself in about two hours and save about $225 on parts markup and labor.

If your unit needs more than two pounds or charged more than once a year it is recommended you have a refrigerant leak check done to your system. You most likely have a serious refrigerant leak and it needs to be repaired. Leaking units do not operate efficiently; take their toll on the environment, and can cause serious HVAC mechanical problems in the future. Lastly, a good HVAC service tech will attempt to find the refrigerant leak within the hour’s air conditioning service you are paying for in addition to the refrigerant charge.
When you need prompt, dependable heating or air conditioning repair in Cumming, you can count on Coolray. We have served the Atlanta metro area for more than 50 years and we are staffed with HVAC professionals that are ready to tackle any heating or air conditioning issue you have, 24 hours a day, 7 days a week. Our technicians are licensed, trained, and have the tools and experience to correctly diagnose and repair your air conditioner, furnace, heat pump or HVAC equipment. 
Next, consider the age of your unit. Remember, as we mentioned earlier, that the average life of a furnace is around 15 to 20 years. In some cases, during the installation process, your licensed and trained technician will write down the installation date right on the unit. If not, you can check inside the chamber door for a metal identification plate containing the serial and model numbers. You can then call the customer service line of the manufacturer and ask for the manufacture date of the unit.
At Reliable Comfort Heating & Air Conditioning, we combine skilled workmanship with dedicated customer service to earn your complete satisfaction.  Whether you are in need of new HVAC installation, replacement, maintenance, repair, air quality solutions, or duct sealing, we draw from extensive hands-on experience, quality products, and advanced training to maximize value and rewards.
5) Adjust your thermostat. If you are away for large stretches of time every day, adjust your thermostat to a higher temperature for the time you are away. This will lessen the amount of time your unit has to work each day, and will lengthen its life cycle. An additional benefit will be a lower utility bill each month. Some newer thermostats allow you to pre-program your thermostat to match your schedule so that your home will still be cool when you arrive. Optimizing your system’s usage will maximize its life in the long term.

Imagine that you’re taking your time at breakfast, watching the morning news, when you hear a clunk coming from your furnace room, and the furnace breaks. Do you know who can come out to service the furnace in Tucker? Our NATE-certified team can service any model of furnace or boiler, and they have earned the most important training and certification in the industry. While you can never truly prevent your furnace from breaking down forever, you can avoid the scenario above by remembering to schedule annual furnace maintenance visits. When a furnace is taken care of, it will perform more efficiently and use less energy, and there is a better chance that there could be fewer costly repairs moving forward.


Our team’s knowledge covers a variety of manufacturers, types of systems, local building codes, and best practices. Each technician goes through 200-plus hours of continuing education and training every year, including weekly training sessions. Whether your HVAC system is complex or small, old or brand new, or located in your basement or garage, our repair technicians can handle it.
In modern buildings, the design, installation, and control systems of these functions are integrated into one or more HVAC systems. For very small buildings, contractors normally estimate the capacity and type of system needed and then design the system, selecting the appropriate refrigerant and various components needed. For larger buildings, building service designers, mechanical engineers, or building services engineers analyze, design, and specify the HVAC systems. Specialty mechanical contractors then fabricate and commission the systems. Building permits and code-compliance inspections of the installations are normally required for all sizes of building.

AromatherapyAccessories,Aromatherapy Sets,Diffusers...907 Bath & BodyAccessories,Aromatherapy,Bath Soaks & Bu...3362 CosmeticsBags & Cases,Body,Brushes & Applicators...9283 FragranceFragrance Gift Sets & Coffrets,Kids Frag...15880 Hair CareHair & Scalp Treatment,Hair Accessories...6392 Health CareCompression,Daily Living Aids,First Aid...5486 MassageAcupuncture & Acupressure,Foot & Leg Mas...2165 Men's Health & BeautyMen's Bath & Body,Men's Hair Care,Men's...4296
After my initial meeting with HVAC Service I had really high hopes and thought these guys were going to be my HVAC go to company. However, it did not pan out this way whatsoever. Initial estimate meeting - This was the initial meeting I thought I found the go to company. Alberto was friendly, punctual, and knowledgeable. I asked some very basic questions and Alberto was able to explain the why's and why not's of each of my questions. Overall I felt really comfortable with Alberto and was extremely impressed. Then it goes all downhill..... Alberto said they were busy but could either install on the upcoming Saturday. We were going to be out of town and said unfortunately that day did not work. He then proposed the upcoming Tuesday as a possible solution, but just had to confirm with another appointment. I said great. I will review the estimate and call your office to confirm I want to move forward with the install. Within 1-hour of Alberto leaving (probably more like 30 minutes) I called the office to confirm I wanted to move forward with the install and to please confirm that Tuesday will be the install day. The lady on the phone said that she will get in touch with Alberto and call me back. This was on a Friday. On Monday I had not received a call from HVAC Service so I called to follow up. The lady on the phone said they were not able to secure a crane for Tuesday and that the install would not be taking place. Fine, no problem I understand. Two weeks go by and no phone call from HVAC Service regarding install date, or any update at all. I call them to check in to see if they have put me on the schedule and when I can expect to have the AC installed. You can tell by the discussion I had with the lady on the phone that they completely forgot about me and have not scheduled anything. She says she needs to get in contact with the owner because she has no idea on the availability of the crane. I was told that she would call me back by the end of the day with an update. Surprise, surprise, no phone call. I call to follow up at the end of the next day and she said that she has not been able to get in touch with the owner. By this time, I am starting to get frustrated because I am starting to get the run around. I question her if I am even on the schedule or if they attempted to schedule a crane. She says they are extremely busy and that she does not know. So I say, basically I have waited over 2 weeks and you have not put me on the schedule and I am at the end of the install line. No answer. I tell her to talk to her boss and find out what is happening, and I will think about what direction I want to move in at this point. Monday the following week, no phone calls, or follow up. I call to get an update and am told that they cannot install my system because they don't have time. I ask what does that mean, one year? One week? Until the end of summer they say. What does that mean I ask? They say at the end of September. I say thank you for wasting 1 month of my time. How could they have served me better without serving me? 1. Be honest and let me know as soon as possible that the install was going to be delayed and probably not happen until the end of summer. Don't waste a month of my time. I could have reached out to a different company in the time I was waiting for them. 2. Communicate! the thing that upsets me the most is I was the one making all the calls to them. Not once did they ever call me to say we have not forgot about you, or this is what is happening. 3. Provide recommendations on other contractors who could have helped me once they realized they were too busy. I am pretty disappointed it came to this review because I really liked this company and wanted to do work with them. It is a family run business, and reminded me of the HVAC business my dad owned. Beware once you are the one that has to start calling them for updates, or to follow up; your time is probably best served by calling a different contractor.
While it should be rare to have problems occur with new equipment, it does happen. When it does, you want a good troubleshooter who is knowledgeable and can make the diagnosis and repair in a timely and efficient manner. That means you want that HVAC contractor who sends their technicians to HVAC technical seminars and factory sponsored training classes. That can make the difference between solving the problem quickly and efficiently in hours or being frustrated waiting days or weeks to have the problem solved. Take the time to choose your contractor wisely and it will save you a lot of heartache and frustration.
Within the construction sector, it is the job of the building services engineer to design and oversee the installation and maintenance of the essential services such as gas, electricity, water, heating and lighting, as well as many others. These all help to make buildings comfortable and healthy places to live and work in. Building Services is part of a sector that has over 51,000 businesses and employs represents 2%-3% of the GDP.
We service, repair and install most every type of hvac system whether it’s gas, electric or oil, on hvac systems (furnaces, heatpumps air conditioning untis and boilers) by Trane, Bryant, York, Goodman, Lennox, Rheem, Panasonic, Fujitsu and many more.  Our service area is mainly around the I-97 to Rout 32 corridor specifically Annapolis, Crownsville, Severna Park, Millersville, Gambrills, Crofton, Odenton, Severn, Fort Meade, Jessup, Elkridge through Columbia, MD.
Did your furnace suddenly stop working? Call Coolray and relax! Our skilled HVAC technicians can repair all makes and models of furnaces, heat pumps and heating equipment. We serve Cumming, GA with 24-hour heating repair service that you can count on when you need it. Our technicians will arrive on time and will be equipped with the tools necessary to correctly diagnose and repair your heating system. Just need routine maintenance on your furnace? We can do that too. Looking for a new system altogether? We're the HVAC contractor Cumming, Georgia residents can count on for all of their home heating needs!

Technician Laurence arrived on time. I was running 20 minutes late and he waited patiently for my arrival. I described the problem with my air conditioner. He examined the A/C system and quickly diagnosed the problem. He had identified that the capacitor was not functioning and replaced it. Her then started the A/C system and confirmed that it was working well. He also checked refrigerant level. I am very happy with the service provided and the professionalism of Bill Howe Technician Laurence. I would highly recommend Bill Howe Heating & Air.
Low refrigerant charges take away from the life of the compressor. The compressor is cooled from the return refrigerant vapor. When there is a low charge there are fewer vapors to cool the compressor, therefore it runs hotter. Any compressor (or electric motor for that matter) which runs above the recommended temperature range will have a shorter life span and cost more to operate.
We live in a recently completed townhouse that was built with double-wall construction. That construction method was touted by the builder as what would keep sound from penetrating between the units. But we can hear the next door neighbors' TV and stereo, and sometimes voices and even snoring, through the wall. While sometimes it's the volume, mostly it's the bass sounds coming through the wall. They say they don't hear us, but we keep our bass turned down. They crank up the bass, and they are not going to change that. They also are not going to do anything construction-wise to help from their side. What is the best way for us to try to block the low frequency/bass sounds from penetrating the existing wall into our side?
With more than 100 years in the field, Lennox has continuously offered industry-leading innovation and technology while preserving high durability and reliability standards. The professionals at Van Haaften Plumbing & Heating help bring those standards to Pella so that you can always have complete home comfort. If you’re searching for a new HVAC system or even if you just have a question about what we offer, give us a ring at 641-628-3621 or set up an appointment with us online. We’d love to hear from you. 
If your unit needs more than two pounds or charged more than once a year it is recommended you have a refrigerant leak check done to your system. You most likely have a serious refrigerant leak and it needs to be repaired. Leaking units do not operate efficiently; take their toll on the environment, and can cause serious HVAC mechanical problems in the future. Lastly, a good HVAC service tech will attempt to find the refrigerant leak within the hour’s air conditioning service you are paying for in addition to the refrigerant charge.

So, whether you need a furnace repair or you’re searching for a new heating and cooling system—or you need a plumbing repair now–you can count on our team in North America. We’re specialists in heating system and plumbing repair and offering exceptional heating and plumbing service is what we do best. Call Service Experts 24/7/365 at 866-397-3787 or request an appointment online today, and don’t forget to visit our coupons page for savings on your heating system or plumbing repair service.


In 1758, Benjamin Franklin and John Hadley, a chemistry professor at Cambridge University, conducted an experiment to explore the principle of evaporation as a means to rapidly cool an object. Franklin and Hadley confirmed that evaporation of highly volatile liquids (such as alcohol and ether) could be used to drive down the temperature of an object past the freezing point of water. They conducted their experiment with the bulb of a mercury thermometer as their object and with a bellows used to speed up the evaporation. They lowered the temperature of the thermometer bulb down to −14 °C (7 °F) while the ambient temperature was 18 °C (64 °F). Franklin noted that, soon after they passed the freezing point of water 0 °C (32 °F), a thin film of ice formed on the surface of the thermometer's bulb and that the ice mass was about 6 mm (1⁄4 in) thick when they stopped the experiment upon reaching −14 °C (7 °F). Franklin concluded: "From this experiment one may see the possibility of freezing a man to death on a warm summer's day."[9]


Reinstall the access panel and disconnect block. Turn on the circuit breaker and furnace switch. Then set the thermostat to a lower temperature and wait for the AC to start (see “Be Patient at Startup,” below). The compressor should run and the condenser fan should spin. If the compressor starts but the fan doesn’t, the fan motor is most likely shot. Shut off the power and remove the screws around the condenser cover. Lift the cover and remove the fan blade and motor (photo 7). Reinstall the blade and secure the cover. Then repower the unit and see if the fan starts. If it doesn’t, you’ve given it your best shot—it’s time to call a pro.
×