Denver HVAC Repair

Low refrigerant charges take away from the life of the compressor. The compressor is cooled from the return refrigerant vapor. When there is a low charge there are fewer vapors to cool the compressor, therefore it runs hotter. Any compressor (or electric motor for that matter) which runs above the recommended temperature range will have a shorter life span and cost more to operate.
Brubaker Inc. is a registered Pennsylvania home improvement contractor (license #4191) and holds property and workers’ compensation insurance at levels appropriate not merely for residential work, but also for commercial and industrial projects. Brubaker Inc. is a member of the Lancaster County Code Association, the ABC Keystone Chapter, and The Lancaster Chamber of Commerce & Industry. This means you can trust that we are committed to providing the highest level of service to our community.
Next, consider the age of your unit. Remember, as we mentioned earlier, that the average life of a furnace is around 15 to 20 years. In some cases, during the installation process, your licensed and trained technician will write down the installation date right on the unit. If not, you can check inside the chamber door for a metal identification plate containing the serial and model numbers. You can then call the customer service line of the manufacturer and ask for the manufacture date of the unit.
We moved into a new home and had issues with the heating ducts in one of the rooms. We called HVAC based on other yelp reviews. Overall, everyone we dealt with were friendly, professional and knowledgeable: From the people on the phone managing the schedule to the those performing the work in our house. The day before the scheduled work we asked if additional work could be done (clothes dryer duct cleaning), which they were able to accommodate. The people working at the house were on time, very polite, took great care to keep the house clean during the entire job and explained everything when they were finished. I will certainly use HVAC again.

1/18/2014 Hi Jody M-  First, as you pointed out, we were the "Only" company to answer your phone call on the… Hi Jody M-  First, as you pointed out, we were the "Only" company to answer your phone call on the weekend & provide service for you on the same day. There is a premium for most any service company to come out afterhours or weekends, and being we are one of the very few companies to offer this service, a higher labor rate is understandable, after all, we have to pay our service persons an overtime rate for such calls.          
Every Trane is tested to withstand the harshest conditions nature or our engineers can throw at it – like freezing conditions in our System Extreme Environmental Test (SEET) lab or five-inches of water an hour in our Climate Chamber. That's how we get heating and cooling systems you can count on to run through anything. And when it's time for a tune-up, our dealers and certified Trane Comfort Specialists™ are always at your service right when you need them. It's that kind of reliability that's earned us the positions of America's Most Trusted HVAC System*.
In the refrigeration cycle, heat is transported from a colder location to a hotter area. As heat would naturally flow in the opposite direction, work is required to achieve this. A refrigerator is an example of such a system, as it transports the heat out of the interior and into its environment. The refrigerant is used as the medium which absorbs and removes heat from the space to be cooled and subsequently ejects that heat elsewhere.
If your air ducts have been damaged, you’ll need to replace them. The national average air duct replacement cost is $150-$280, which may not include materials. Factors such as duct material, labor, location of ducts and linear feet of ductwork will all affect your final costs. Labor costs will vary based on how accessible the ducts are and what material your ducts are made of. The least expensive duct material is a flexible, non-metallic ducting that costs approximately $1-$2 per linear foot. Flexible aluminum is generally more expensive and stronger than non-metallic ducting. Stainless steel ducting is the strongest, the least flexible (meaning installing it typically has higher labor rates), and usually the most expensive. An average price for air duct replacement could range between $35 and $55 per linear foot, including basic materials and labor. A typical single-family home has 6-10 duct runs; replacing or installing one duct run could average $150-$250 for labor.
“Today Tom Mendoza visited a rental house I own. Again another great visit, he represented himself & Robinson Air in an outstanding manner. Tom was very knowledgeable, professional and courteous. In all the techs I have interacted with from Robinson Air, they continue to show great pride and candor when laying out options. There is no doubt, this is a first class business who work for the customer. Call them first!!! Kudos to Tom and all the Robinson Air team. Thank you.”
San Jose, CA ServicesLOWE'S OF CENTRAL SAN JOSE - Bathroom Design and RemodelAll Weather Roofing. Roofing Contractor - San Jose, CACuong's Carpet Cleaning. Carpet Cleaner - San Jose, CAE Z Home. Landscaping Company - San Jose, CACrown Plumbing. Plumber - San Jose, CAGardens Alive Landscape MaintenenceMarcone Appliance PartsJet Dry Carpet CleaningPatrick Ross ConstSwat Pest ControlAwr DumpstersTron Air
All graduates keep access to their accounts on the Ashworth EDGE, an online toolkit that provides step-by-step guidance through resume templates, cover letters, thank you letters, and more. As a student, you will interact with the Ashworth EDGE throughout your lessons to make you comfortable with the tools and prepare you to make a good impression on potential employers once you've graduated!
Beacon Plumbing, Heating and Mechanical is a residential and commercial HVAC contractor.  We make heating and air conditioning affordable for Puget Sound area homeowners and business owners.  We are heating and cooling experts.  We are able to install, repair, service and retrofit all HVAC brands.  If your home or business needs heating, ventilation or air conditioning then we are a residential and commercial HVAC contractor that installs the most modern and advanced HVAC technology in the Seattle, WA area. 
Once a diagnosis is made to your air-conditioning and/or heating system, the unit can be repaired, in most situations, with stock HVAC parts off the truck. Sometimes the HVAC part has to be ordered because it is a specialty part that only the HVAC manufacturer of your equipment can provide. If the part can be picked up locally then you can expect to pay for travel time to and from the HVAC parts dealer. It is practically impossible to carry every single HVAC part for every single HVAC breakdown that occurs.
Per hour service charges are not the only way companies charge their customers. There are also service companies that flat rate their services. Either way, you pay, you want the service and troubleshooting done in a quick and efficient manner with a guarantee. Do your research before selecting a company to provide reliable, honest service to your home. If you know what the problem is then the company can likely give you an estimate over the phone. Some will while some do not. Why? Because they likely want to verify the problem to make sure it is a correct assessment. It can be a complex issue and what you think it is it may not be the problem. So you can expect to pay for a service call and troubleshooting charge. Most HVAC service companies do not give free estimates on repairs.

We are large enough to service you with prompt service and best prices, but small enough to provide you with that personalized service you deserve. Our offices serve all of Hillsborough, Pinellas, Pasco, Polk, Sarasota, Manatee, Charlotte, Hernando & Citrus counties. Serving Tampa, St Petersburg, Clearwater, Lakeland, Sarasota, Bradenton, Temple Terrace, Brandon, Apollo Beach, Riverview, Valrico, Lithia, Palm Harbor, Plant City, Lutz, Wesley Chapel, Land o Lakes, Port Richey, Spring Hill, and all surrounding areas.

My mom just received service from this company. She paid $609 to have her frion replaced. After two uses the AC stops working. A young rep comes out to the house again and notifies her that her entire AC unit and furnace need to be replace for just shy of ten grand, though when her frion was refilled she was told that her system should last another five years. When they came back to tell her how her entire system needed to be replaced, they were generous enough to offer her a $300 credit on the nearly $10,000 estimate of replacing the entire system that was working fine until they touched it. My best assumption would be that there is a mishap with the system is due to their negligence. Id suggest using another company other than these scam artists.


A.J. LeBlanc Heating specializes in the installation and service of heating, air conditioning and plumbing systems for residential homes. Whether you are building a new home, converting your existing heating system to a different fuel, upgrading your old unit to a more efficient system, or just adding air conditioning, LeBlanc Heating can service your needs.
If you ever need a repair or maintenance preformed on your Trane air conditioning and heating equipment, we hope you’ll give R.S. Andrews a chance to earn your business. Literally tens of thousands of homeowners have called our hotline for repairs. While you can’t please everyone, we try and have done so in over 99% of the services calls we have performed. It’s a high standard equaled by the quality of Trane air conditioners, furnaces and heat pumps. Call now for service and repair. And don’t forget that we provide plumbing and electrical service and repair, too.

BIG THANK YOU for being honest, and advising us that for some reason the fuse/switch was in the reverse position so the AC unit would not properly turn on.   The unit turned back on immediately, and began cooling the house.   And then providing advice that the AC/Heating system needed some TLC, and giving us options to save money by purchasing a maintenance plan that included the filters plus cleaning services since we were already being charged for the service today.


We service and install forced air systems from all manufacturers, including Trane, Burnham, Heil, Rheem, and many more. If your home needs a new system, we will recommend the best system for your needs and budget. If you have a brand preference, we can recommend and provide qualified installation of a system from that company that fits your home’s needs.
In very dry climates, evaporative coolers, sometimes referred to as swamp coolers or desert coolers, are popular for improving coolness during hot weather. An evaporative cooler is a device that draws outside air through a wet pad, such as a large sponge soaked with water. The sensible heat of the incoming air, as measured by a dry bulb thermometer, is reduced. The temperature of the incoming air is reduced, but it is also more humid, so the total heat (sensible heat plus latent heat) is unchanged. Some of the sensible heat of the entering air is converted to latent heat by the evaporation of water in the wet cooler pads. If the entering air is dry enough, the results can be quite substantial.
Perhaps the most sensible way to cool your home is to use your home's heating apparatus. Heat pumps can work in exactly this fashion. This device exchanges warmer and cooler air particles between your home and the outside air, allowing you to create a comfortable environment inside your home without the need of generating your own source of heat and cold. The one major drawback of heat pumps is that they tend to be inadequate in extremely cold or hot temperatures, which Portland essentially never sees. The only reason many homeowners don't have heat pumps in their homes is that they already have a forced air heating system. Thus, the best time to install air conditioning for your home is when your heating system fails.
The Refrigeration Loop is a closed system and refrigerant should never have to be added to the unit unless there is a leak. Most residential units use R-22/R410A refrigerant. Prices of R-22/R410A are rising every year as we get closer to the date when refrigerant manufacturers will no longer be able to make R-22/R410A. Phase-out of R-22, an HCFC, begins in 2010 and expected to be complete by 2020.). Furthermore, make sure you ask what the service company charges for R-22 when you are calling an HVAC contractor.
The use of CFC as a refrigerant was once common, including the refrigerants R-11 and R-12 (sold under the brand name Freon-12). Freon refrigerants were commonly used during the 20th century in air conditioners due to their superior stability and safety properties. When they are released accidentally or deliberately, these chlorine-bearing refrigerants eventually reach the upper atmosphere.[60] Once the refrigerant reaches the stratosphere, UV radiation from the Sun homolytically cleaves the chlorine-carbon bond, yielding a chlorine radical. These chlorine radicals catalyze the breakdown of ozone into diatomic oxygen, depleting the ozone layer that shields the Earth's surface from strong UV radiation. Each chlorine radical remains active as a catalyst until it binds with another radical, forming a stable molecule and quenching the chain reaction.
Turning to a source you know and trust is a solution many can rely on. Online review sites can be full of negative or glowing experiences – you don’t know who’s telling the truth on Yelp, you don’t know who they are! Your neighbor, coworker, or family member is someone you’ve built a relationship with. You trust their opinions on many subjects – local air conditioner repair is no different.”
Focus first on sealing ducts that run through the attic, crawlspace, unheated basement, or garage. Use duct sealant (mastic) or metal-backed (foil) tape to seal the seams and connections of ducts. After sealing the ducts in those spaces, wrap them in insulation to keep them from getting hot in the summer or cold in the winter. Next, look to seal any other ducts that you can access in the heated or cooled part of the house. See our Duct Sealing Fact Sheet (787KB) for more information.

Most of the time, diagnosing problems is simple and other times it can be a complicated process where the HVAC technician calls in another HVAC technician. The technician may call in an HVAC manufacturer representative. Residential and commercial heating and cooling is important and you want the best possible HVAC air conditioning and heating service. It does not matter whether you have a Carrier Air Conditioner, Trane Air Conditioners, or need a replacement, whatever, it is best to get a qualified technician to look at your system before a decision is made to repair or replace the air conditioner or heat pump systems.


Central, "all-air" air-conditioning systems (or package systems) with a combined outdoor condenser/evaporator unit are often installed in North American residences, offices, and public buildings, but are difficult to retrofit (install in a building that was not designed to receive it) because of the bulky air ducts required. (Minisplit ductless systems are used in these situations.) Outside of North America, packaged systems are only used in limited applications involving large indoor space such as stadiums, theatres or exhibition halls.
HVAC pros are busy, especially in the summer. Just because you need an AC repair right now, that does not mean an HVAC pro will be available. Additionally, if they are free, your cost to repair the AC unit just went up. Emergency situations call for changes in schedules, surprise road trips and many other sudden situations. As such, air conditioning contractors tend to charge more.
Got to say that I am very pleased with their work. The knowledge of the technician was on the spot. She was very professional at all times sharing her expertise and advice with me. Going further, I have hired some other pro's from this website to fix my AC and none them identified a faulty connection on the AC blower control board as my technician from Superior AC did. The price for the repair was fair, no overpricing at all. I am pretty sure that I will call them again and definitively recommend them. Thanks!! Aurelio
I have a recurring problem of having to have freon added to my A/C system. I have even replaced both units inside and outside but seem to have the same problem. I believe that it must be in the lines between the outside and inside. Is there anything that can be put into the lines to seal any leaks if this is the problem? If not is it advised that the lines be replaced?
Was not satisifed with this company. This person came out and took 10 minutes only to tell me that my unit would not last for a year and that I needed to have it replaced! I'm not sure if he was very knowlegable or if he was just plain lazy and do not even try to fix the problem. He just wanted to install a brand new system because he was both and of course, that's much more money for him!

2) Keep your coils clean. The AC coils and fins on the outside of your unit need to be kept clean and clear of obstructions. Leaves and other debris sometimes accumulate around your unit. If obstructions are present, your unit must work harder to function than it should. You can clean your unit with a regular garden hose and a broom. Do not use a pressure washer, as the strong spray could cause harm to your system. A little bit of housekeeping in this regard goes far toward keeping your air conditioner working optimally. 


Focus first on sealing ducts that run through the attic, crawlspace, unheated basement, or garage. Use duct sealant (mastic) or metal-backed (foil) tape to seal the seams and connections of ducts. After sealing the ducts in those spaces, wrap them in insulation to keep them from getting hot in the summer or cold in the winter. Next, look to seal any other ducts that you can access in the heated or cooled part of the house. See our Duct Sealing Fact Sheet (787KB) for more information.

If the condenser coils are clogged, the compressor can overheat and shut down. You’ll experience intermittent periods of minimal cooling, followed by no cooling. Even if you’re “sure” the condenser coils are clean, clean them again. Turn off the power. Flip the air conditioning service and furnace circuit breakers in your main electrical panel to the “Off” position. Next, turn off the power switch right at the furnace or air handler. Then yank the disconnect block (Photo 1) and clean the condenser coils (Photo 2). If the air conditioning service still doesn’t work properly after you’ve cleaned the condenser coils, installed a new filter and opened all the supply vents, proceed with the following repairs.

×