Denver HVAC Repair

If your unit needs more than two pounds or charged more than once a year it is recommended you have a refrigerant leak check done to your system. You most likely have a serious refrigerant leak and it needs to be repaired. Leaking units do not operate efficiently; take their toll on the environment, and can cause serious HVAC mechanical problems in the future. Lastly, a good HVAC service tech will attempt to find the refrigerant leak within the hour’s air conditioning service you are paying for in addition to the refrigerant charge.

Strongsville Heating & Air Conditioning simplifies the challenges of keeping a perfectly comfortable home. We provide convenience, cost-savings, and reliability using top of the line products, premium materials, highly skilled technicians and exceptional customer service. Whether you need a new heating/cooling installation, replacement, retrofit, routine maintenance, trustworthy repair or air quality options, count on our team of NATE-certified technicians to eliminate stress and maximize comfort. We protect your busy schedule with flexible appointments, prompt arrival and mess free completion. Strongsville Heating & Air Conditioning is always available to you for Emergency Service, 24 hours a day, 365 days a year across Strongsville & Surrounding Areas.
The Environmental Protection Agency (EPA) requires that all technicians who open a system containing a controlled refrigerant be certified to do so. There are four levels of certification, one of which is a “universal” certification to allow the HVAC technician to work on any type of equipment containing refrigerant. Your HVAC technician should be certified as “Level II Certified” at a minimum or, preferably, “Universal Certification” to work on your central air conditioner. Obtaining this certification information from your professional HVAC technician may be required in the event you are working with a realtor to sell your home. Costs for certification average $40-$240.
Whether you’re starting your air conditioner for the first time this year, or a unit isn’t running properly and you need to service an air conditioner, following a few simple steps can save you time and money. While some service jobs should be left to a professional, there are several do-it-yourself fixes you can do to keep your air conditioner cooling all summer long.
Although your AC may continue to work for a time, if you ignore warning signs of air conditioner repair troubles, it can be much more costly to repair in the long term. Diminished cooling capacity not only makes your home uncomfortably warm, but it also raises your utility bills significantly as your unit struggles to maintain the desired temperature ineffectively. A system put under strain is likely to overheat, resulting in major damage. Therefore, it is best to have your air conditioner repaired promptly when you discover signs of trouble. 

I call to follow up at the end of the next day and she said that she has not been able to get in touch with the owner.  By this time, I am starting to get frustrated because I am starting to get the run around.  I question her if I am even on the schedule or if they attempted to schedule a crane.  She says they are extremely busy and that she does not know.  So I say, basically I have waited over 2 weeks and you have not put me on the schedule and I am at the end of the install line.  No answer.  I tell her to talk to her boss and find out what is happening, and I will think about what direction I want to move in at this point.  
The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clogged, dirty filters block normal airflow and reduce a system's efficiency significantly. With normal airflow obstructed, air that bypasses the filter may carry dirt directly into the evaporator coil and impair the coil's heat-absorbing capacity. Replacing a dirty, clogged filter with a clean one can lower your air conditioner's energy consumption by 5% to 15%.
The performance of vapor compression refrigeration cycles[23] is limited by thermodynamics. These air conditioning and heat pump devices move heat rather than convert it from one form to another, so thermal efficiencies do not appropriately describe the performance of these devices. The Coefficient-of-Performance (COP) measures performance, but this dimensionless measure has not been adopted. Instead, the Energy Efficiency Ratio (EER) has traditionally been used to characterize the performance of many HVAC systems. EER is the Energy Efficiency Ratio based on a 35 °C (95 °F) outdoor temperature. To more accurately describe the performance of air conditioning equipment over a typical cooling season a modified version of the EER, the Seasonal Energy Efficiency Ratio (SEER), or in Europe the ESEER, is used. SEER ratings are based on seasonal temperature averages instead of a constant 35 °C (95 °F) outdoor temperature. The current industry minimum SEER rating is 14 SEER.[24]

With the split system, the evaporator coil is connected to a remote condenser unit using refrigerant piping between an indoor and outdoor unit instead of ducting air directly from the outdoor unit. Indoor units with directional vents mount onto walls, suspended from ceilings, or fit into the ceiling. Other indoor units mount inside the ceiling cavity, so that short lengths of duct handle air from the indoor unit to vents or diffusers around the rooms.
Air conditioning makes deep plan buildings feasible, for otherwise they would have to be built narrower or with light wells so that inner spaces received sufficient outdoor air via natural ventilation. Air conditioning also allows buildings to be taller, since wind speed increases significantly with altitude making natural ventilation impractical for very tall buildings.[citation needed] Comfort applications are quite different for various building types and may be categorized as:
The condensed, pressurized, and still usually somewhat hot liquid refrigerant is next routed through an expansion valve (often nothing more than a pinhole in the system's copper tubing) where it undergoes an abrupt reduction in pressure. That pressure reduction results in flash evaporation of a part of the liquid refrigerant, greatly lowering its temperature. The cold refrigerant is then routed through the evaporator. A fan blows the interior warm air (which is to be cooled) across the evaporator, causing the liquid part of the cold refrigerant mixture to evaporate as well, further lowering the temperature. The warm air is therefore cooled and is pumped by an exhaust fan/ blower into the room. To complete the refrigeration cycle, the refrigerant vapor is routed back into the compressor. In order for the process to have any efficiency, the cooling/evaporative portion of the system must be separated by some kind of physical barrier from the heating/condensing portion, and each portion must have its own fan to circulate its own "kind" of air (either the hot air or the cool air).

We do our best to screen all of our hvac contractors. However, there are still some hvac contractor professionals in Portland that have not been pre-screened. This means that their licenses may not be up to date to operate in Portland or OR. Always be sure to pre-screen them yourself before hiring. Here are some unscreened professionals offering hvac:
The installment team ARS made numerous attempts to correct the issue over the last several months. They have not found the issue on why my 2018 outside unit and inside unit (4 ton unit) is not cooling the house down. I had the unit for 1 year and in the months of July and August the Nest unit reads 90 degrees from 12 noon to 7pm. My wife and I are very upset with the upgrade unit we purchase from Home Depot.
Next, consider the age of your unit. Remember, as we mentioned earlier, that the average life of a furnace is around 15 to 20 years. In some cases, during the installation process, your licensed and trained technician will write down the installation date right on the unit. If not, you can check inside the chamber door for a metal identification plate containing the serial and model numbers. You can then call the customer service line of the manufacturer and ask for the manufacture date of the unit.
San Jose, CA ServicesLOWE'S OF CENTRAL SAN JOSE - Bathroom Design and RemodelAll Weather Roofing. Roofing Contractor - San Jose, CACuong's Carpet Cleaning. Carpet Cleaner - San Jose, CAE Z Home. Landscaping Company - San Jose, CACrown Plumbing. Plumber - San Jose, CAGardens Alive Landscape MaintenenceMarcone Appliance PartsJet Dry Carpet CleaningPatrick Ross ConstSwat Pest ControlAwr DumpstersTron Air
At TML Service Experts Heating & Air Conditioning, we understand heating and air conditioning, which is why we back up our work with our 100% Satisfaction Guarantee*. Not only does it show our confidence that you’ll be happy with the furnace repair we have done, it holds us to a higher standard, making certain that we continue to provide you with amazing service without fail. When it’s time to handle any heating and cooling question or concern you have, know that you can trust the team at TML Service Experts regardless of what the Boise weather brings.

Need a residential electrician in southern NH? The LeBlanc electrical team has the skilled electricians needed to resolve all of your residential and light commercial electrical needs. It's your style and your budget. We answer questions, provide estimates and install everything from lighting fixtures to whole house generators. Let us be your electrical liaison.
Fall is here and winter right around the corner which means soon you will be using your furnace day in and day out. With that said, you cannot expect your heating system to perform at peak levels and provide you with all the warmth and comfort you need if you do not take time out to schedule routine maintenance or an immediate furnace repair should you discover a problem with your system exists.
All AC repairs were not created equal. While a new filter could cost as low as $20, a refrigerant leak repair can cost up to $1,600. Just like any aspect of the house, certain repairs will mostly depend on the damage. Clearly, the more serious issues will cost more. That not only means more time for the HVAC pro, but more complexity and materials as well. Sadly, neither come without a hefty markup.
Preventative Maintenance: Keep your HVAC & Refrigeration equipment operating at peak efficiency with a preventative maintenance program. Regularly maintained equipment lasts longer, provides reliable comfort on the hottest Acworth summer day, and lowers energy consumption. If you’ve ever experienced and emergency repair your know the costs are high. Components are damaged beyond repair. Let R.S. Andrews maintain your systems. Call (770) 574-6700 now.

Copyright 2018 Rocket Lawyer Incorporated. Rocket Lawyer provides information and software only. Rocket Lawyer is not a "lawyer referral service" and does not provide legal advice or participate in any legal representation. Rocket Lawyer is not a law firm or a substitute for an attorney or law firm. Use of Rocket Lawyer is subject to our Terms of Service and Privacy Policy.


Your home’s HVAC system is a fine-tuned piece of machinery. Like your car, your system needs regular maintenance and tune-ups to ensure it is running reliably. Manufacturer warranties for most new systems require annual tune-ups, and for good reason: these preventative maintenance measures extend the life of your system by keeping your system running the way it is designed to run.

Central home air conditioner service systems consist of two major components: a condensing unit that sits outside your house, and the evaporator coil (often referred to as an A-coil) that sits in the plenum of your furnace or air handler. The refrigerant in the A-coil picks up the heat from your home and moves it to the outdoor condensing unit. The condensing unit fan blows outside air through the condensing coil to remove the heat. The condensing unit houses the three parts replaceable by a DIYer: the contactor, the start/run capacitor(s) and the condenser fan motor. The condensing unit also houses the compressor, but only a pro can replace that. The A-coil has no parts that can be serviced by a DIYer.
×