We service and install forced air systems from all manufacturers, including Trane, Burnham, Heil, Rheem, and many more. If your home needs a new system, we will recommend the best system for your needs and budget. If you have a brand preference, we can recommend and provide qualified installation of a system from that company that fits your home’s needs.
Since the 1980s, manufacturers of HVAC equipment have been making an effort to make the systems they manufacture more efficient. This was originally driven by rising energy costs, and has more recently been driven by increased awareness of environmental issues. Additionally, improvements to the HVAC system efficiency can also help increase occupant health and productivity. In the US, the EPA has imposed tighter restrictions over the years. There are several methods for making HVAC systems more efficient.
Berkeys is a licensed HVAC contractor and air conditioning company offering AC repair, Air Conditioning tune-up, and air conditioning replacement services in Southlake, TX, Keller, TX, Coppell, TX, Colleyville, TX, Grapevine, TX, Plano, TX, Fort Worth, TX, Arlington, TX, Frisco, TX, Dallas, TX, Addison, TX, Flower Mound, TX, Irving, TX, McKinney, TX, Arlington, TX, Euless, TX, Denton, TX, Highland Village, TX, Grand Prairie, TX, Westlake, TX, Farmers Branch, TX, Lewisville, TX and more. Call to confirm service for your home.
The liquid refrigerant is returned to another heat exchanger where it is allowed to evaporate, hence the heat exchanger is often called an evaporating coil or evaporator. As the liquid refrigerant evaporates it absorbs energy (heat) from the inside air, returns to the compressor, and repeats the cycle. In the process, heat is absorbed from indoors and transferred outdoors, resulting in cooling of the building.
Our licensed HVAC Dallas Air Conditioning technicians are experts in air conditioning, heating & cooling technology and the latest innovations in green technology, including the installation of Energy Star certified products and the use of Ozone friendly refrigerants. Residential customers depend on Berkeys for timely, quality, and affordable air conditioning repair, maintenance, and installation solutions in Dallas. Read our Air Conditioning Reviews.
A mini-split system typically supplies air conditioned and heated air to a single or a few rooms of a building. Multi-zone systems are a common application of ductless systems and allow up to 8 rooms (zones) to be conditioned from a single outdoor unit. Multi-zone systems typically offer a variety of indoor unit styles including wall-mounted, ceiling-mounted, ceiling recessed, and horizontal ducted. Mini-split systems typically produce 9,000 to 36,000 Btu (9,500–38,000 kJ) per hour of cooling. Multi-zone systems provide extended cooling and heating capacity up to 60,000 Btu's.
Changing your central air conditioning unit's air filter at least once every six months will not only help you save on your monthly bills but also will help extend the life of your system. Changing the filter every three months is even better. All the air in your home circulates and recirculates through the same filter attached to your indoor unit. Designed to remove dust particles to keep the air you breathe clean, filters become clogged, causing your air conditioning and heating system to work less efficiently and costing you more to operate it. If left unchanged long enough, your system could fail completely.
The most common signs that the air conditioning unit may soon break down include loud or strange noises coming from the unit or warmer than normal air being released. In addition, if your unit smells bad, is frosty or water is leaking, chances are, you’re in need of repair. When the air conditioning unit displays these symptoms, contact a local HVAC pro. Just like a low tank of gas, it’s better to gas now versus running out in the middle of a 95-degree July afternoon.
Technicians who specialize in new installation work may experience periods of unemployment when the level of new construction activity declines. Maintenance and repair work, however, usually remains relatively stable. Business owners and homeowners depend on their climate-control or refrigeration systems year round and must keep them in good working order, regardless of economic conditions.
Before you reach out to local HVAC companies, jot down a few notes. Know the model of your unit and see if it’s under warranty. If so, call the manufacturer first. Then, get multiple quotes for the project in question. Never get less than two quotes for any home remodeling project. Once received, compare all and make sure all include the same work. Check referrals and certifications before making a final decision.
When your heating or cooling system finally breaks, it’s not usually during convenient office hours or in mild weather. Your HVAC unit has to work harder during extreme conditions like a sweltering summer day or freezing winter night, so it is much more likely to fail during those times. R.S. Andrews has our customers’ safety and comfort as our priority, so we offer service 24 hours a day for emergencies. No matter when your equipment fails, you can count on us to repair it quickly and efficiently!
You haven’t had a ductwork inspection in years: According to PG&E, the average home’s ductwork leaks up to 30 percent of its air before it actually reaches your living space. That means you’re still paying for the energy used to cool the air—without getting the relief of a cool home. Hire a technician to come take a look at your system; they can perform what’s called a duct-leakage test, which measures how much air is escaping the system. If it turns out your ducts are faulty or have significant gaps, a technician should be able to seal them up or replace your pipes—meaning you might not need a complete system overhaul. However, keep in mind that modern HVAC units are almost always more efficient thanks to technology advancements. In the end, you have to weigh your options: will you need to perform repairs each month?
Other than mineral deposits, the most common problem is sediment in the water supply. The float inlet valve has a tiny hole that easily clogs. The float is usually made of plastic, and if cracked will fill with water and sink. The valve will be stuck open and the reservoir will overflow. Use caution when scraping deposits off the float. If the deposits cannot be removed, replace the float or it will sink and cause an overflow.
Additionally, new technology and government requirements are pushing manufacturers to build more energy efficient HVAC equipment. January 2006 we observed the end of 10 SEER units with 13 SEER air conditioning units mandated by the government. This only makes sense; however, with the higher efficiency, there comes complexity in the technology engineered into the equipment. A problem can be difficult to troubleshoot and diagnose and may require more time than the lower efficiency, less complex units.
If your air conditioner is old, consider buying an energy-efficient model. Look for the ENERGY STAR® and EnergyGuide labels — qualified central units are about 15% more efficient than standard models. New residential central air conditioner standards went into effect on January 1, 2015; see the efficiency standards for central air conditioners for details, and consider purchasing a system with a higher SEER than the minimum for greater savings.
We do our best to screen all of our hvac contractors. However, there are still some hvac contractor professionals in Portland that have not been pre-screened. This means that their licenses may not be up to date to operate in Portland or OR. Always be sure to pre-screen them yourself before hiring. Here are some unscreened professionals offering hvac:
Should you experience a system breakdown, know that there are a few common causes of summer AC repairs. Below you’ll find a few of the most common ones AC repair technicians face each day throughout the warmer months. Having a better understanding of the troubles your system may face can help you feel more at ease with the AC repair process, and better comprehend the information given to you by your technician.
We moved into a new home and had issues with the heating ducts in one of the rooms. We called HVAC based on other yelp reviews. Overall, everyone we dealt with were friendly, professional and knowledgeable: From the people on the phone managing the schedule to the those performing the work in our house. The day before the scheduled work we asked if additional work could be done (clothes dryer duct cleaning), which they were able to accommodate. The people working at the house were on time, very polite, took great care to keep the house clean during the entire job and explained everything when they were finished. I will certainly use HVAC again.
Energy efficiency can be improved even more in central heating systems by introducing zoned heating. This allows a more granular application of heat, similar to non-central heating systems. Zones are controlled by multiple thermostats. In water heating systems the thermostats control zone valves, and in forced air systems they control zone dampers inside the vents which selectively block the flow of air. In this case, the control system is very critical to maintaining a proper temperature.
Need a residential electrician in southern NH? The LeBlanc electrical team has the skilled electricians needed to resolve all of your residential and light commercial electrical needs. It's your style and your budget. We answer questions, provide estimates and install everything from lighting fixtures to whole house generators. Let us be your electrical liaison.
A specialized air conditioner that is used only for dehumidifying is called a dehumidifier. It also uses a refrigeration cycle, but differs from a standard air conditioner in that both the evaporator and the condenser are placed in the same air path. A standard air conditioner transfers heat energy out of the room because its condenser coil releases heat outside. However, since all components of the dehumidifier are in the same room, no heat energy is removed. Instead, the electric power consumed by the dehumidifier remains in the room as heat, so the room is actually heated, just as by an electric heater that draws the same amount of power.
The contactor (relay) and start/run capacitor(s) (see illustration below) fail most often and are inexpensive. So it’s a safe bet to buy and install those parts right away, especially if your air conditioning service unit is older than five years. The condenser fan motor can also fail, but it runs about $150 — hold off buying that unless you’re sure that’s the culprit.