Denver HVAC Repair

While it should be rare to have problems occur with new equipment, it does happen. When it does, you want a good troubleshooter who is knowledgeable and can make the diagnosis and repair in a timely and efficient manner. That means you want that HVAC contractor who sends their technicians to HVAC technical seminars and factory sponsored training classes. That can make the difference between solving the problem quickly and efficiently in hours or being frustrated waiting days or weeks to have the problem solved. Take the time to choose your contractor wisely and it will save you a lot of heartache and frustration.
I even asked if this is something they don't do, as in services on a Saturday night.  I was told by the receptionist that they do and I would just be ok calling another company if they is not  part of their services. They again assured me someone WILL call me in 10 mins.  Well, unless their definition of 10 mins is never, then they got it wrong as I am still waiting to be called 5 days later.
HVAC.com has some very comprehensive resources available to aid homeowners like you in times of AC repair crisis. Using the resources below, you can work to protect your cooling system from breakdown, better understand what types of AC repairs you may face, know what to do in emergency situations, and know how to find a trusted AC repair company when you need them.

If the AC doesn’t turn off, it may be time to clean the condensing unit. Dirty condenser coils won’t give off heat efficiently and will keep the unit running.  Another possibility: The contacts on the outdoor run relay may have welded together—something that can happen over time because of frequent electrical arcing at the relay. Before checking the run relay, turn off the power to the furnace and the condensing unit. Next, disassemble the relay and pry apart the contacts. This should do the trick until you buy a replacement—which you should do soon.


Need a residential electrician in southern NH? The LeBlanc electrical team has the skilled electricians needed to resolve all of your residential and light commercial electrical needs. It's your style and your budget. We answer questions, provide estimates and install everything from lighting fixtures to whole house generators. Let us be your electrical liaison.
Yes. You should expect to pay a diagnostic fee to cover the cost of the technician's visit, the diagnosis of your air conditioner's problem, and a quote for the repair options. You will be advised of the issue along with recommended options to correct it, which may include a system replacement if your unit is old or significantly damaged. If you decide to replace the system, the diagnostic fee will be credited toward your replacement purchase.
In 1906, Stuart W. Cramer of Charlotte was exploring ways to add moisture to the air in his textile mill. Cramer coined the term "air conditioning", using it in a patent claim he filed that year as an analogue to "water conditioning", then a well-known process for making textiles easier to process. He combined moisture with ventilation to "condition" and change the air in the factories, controlling the humidity so necessary in textile plants. Willis Carrier adopted the term and incorporated it into the name of his company.[10]
A heat pump is an air conditioner in which the refrigeration cycle can be reversed, producing heating instead of cooling in the indoor environment. They are also commonly referred to as a "reverse cycle air conditioner". The heat pump is significantly more energy efficient than electric resistance heating. Some homeowners elect to have a heat pump system installed as a feature of a central air conditioner. When the heat pump is in heating mode, the indoor evaporator coil switches roles and becomes the condenser coil, producing heat. The outdoor condenser unit also switches roles to serve as the evaporator, and discharges cold air (colder than the ambient outdoor air).
Our heater went out last Saturday, which was a cold day.  Called a few different places and they… Our heater went out last Saturday, which was a cold day.  Called a few different places and they were the only ones that called back.  The technician Tony came out and after a little testing said the main control board needed to be replaced.  He quoted us a total of $489 which seemed on the high side but it was cold and we were somewhat desperate, so we agreed and paid a parts deposit.
Our heating and cooling maintenance plans include: 2 preventative maintenance visits per year (1 heating, 1 cooling), priority service, 15% off repairs, including parts, labor and refrigerant, 20% off diagnostic fees, no overtime charges on emergency service, and a 1-year guarantee on all repairs and modifications, an upgrade over the standard 90-day warranty. Sign up today and have one less thing to worry about in your home!
In 1992, a non-governmental organization, Greenpeace, was spurred by corporate executive policies and requested that a European lab find substitute refrigerants. This led to two alternatives, one a blend of propane (R290) and isobutane (R600a), and one of pure isobutane.[18][22] Industry resisted change in Europe until 1993, and in the U.S. until 2011, despite some supportive steps in 2004 and 2008 (see Refrigerant Development above).[27][67]
Hi. I hope someone can help me. I have a has water heater amd it seems to only work when it wants to. Regardless of amount of use some days I have got water and some days it runs out of hot water immediately even if it hasn't been used all day. And some days it runs out half way through a shower. I have already turned the temperature almost all the way up and nothing is helping. Is there a way too fix this or is it time for a replacement?
Tony from HVAC came out on Sunday morning and did a fantastic job of immediately diagnosing the issue, quickly fixing the problem, and honoring the coupons I had.  When I initially called on Saturday morning, I had a lot of trouble with their answering service getting their wires crossed with their technicians.  However, Tony called me back and made it right.  He even pointed out an issue that is in the horizon that I should look at (without charging me extra or telling me I had to fix it right now). Great service!
The Refrigeration Loop is a closed system and refrigerant should never have to be added to the unit unless there is a leak. Most residential units use R-22/R410A refrigerant. Prices of R-22/R410A are rising every year as we get closer to the date when refrigerant manufacturers will no longer be able to make R-22/R410A. Phase-out of R-22, an HCFC, begins in 2010 and expected to be complete by 2020.). Furthermore, make sure you ask what the service company charges for R-22 when you are calling an HVAC contractor.
You haven’t had a ductwork inspection in years: According to PG&E, the average home’s ductwork leaks up to 30 percent of its air before it actually reaches your living space. That means you’re still paying for the energy used to cool the air—without getting the relief of a cool home. Hire a technician to come take a look at your system; they can perform what’s called a duct-leakage test, which measures how much air is escaping the system. If it turns out your ducts are faulty or have significant gaps, a technician should be able to seal them up or replace your pipes—meaning you might not need a complete system overhaul. However, keep in mind that modern HVAC units are almost always more efficient thanks to technology advancements. In the end, you have to weigh your options: will you need to perform repairs each month?
Circulating refrigerant vapor enters the compressor, where its pressure and temperature are increased. The hot, compressed refrigerant vapor is now at a temperature and pressure at which it can be condensed and is routed through a condenser. Here it is cooled by air flowing across the condenser coils and condensed into a liquid. Thus, the circulating refrigerant removes heat from the system and the heat is carried away by the air. The removal of this heat can be greatly augmented by pouring water over the condenser coils, making it much cooler when it hits the expansion valve.
Preventative Maintenance: Keep your HVAC & Refrigeration equipment operating at peak efficiency with a preventative maintenance program. Regularly maintained equipment lasts longer, provides reliable comfort on the hottest Acworth summer day, and lowers energy consumption. If you’ve ever experienced and emergency repair your know the costs are high. Components are damaged beyond repair. Let R.S. Andrews maintain your systems. Call (770) 574-6700 now.

Also, have an energy-efficiency professional come to your home and perform an energy assessment. This assessment could be either conducting a walk-through of your home with a clipboard or performing a thorough audit, pressurizing your home with a blower-door test to detect energy leaks. You may qualify for state discounts or rebates to have insulation installed in your home. Some utility companies also subsidize the cost of these energy efficiency assessments.
No matter where you bought your air conditioning system, we can repair it. We have years of experience working with all the best central air conditioner brands such as Kenmore, Carrier. Trane, Goodman, and Rheem. As a result, you can rest assured we’re familiar with your air conditioning system and we have the parts you need to complete a successful air conditioner repair.

Tony from HVAC came out on Sunday morning and did a fantastic job of immediately diagnosing the issue, quickly fixing the problem, and honoring the coupons I had. When I initially called on Saturday morning, I had a lot of trouble with their answering service getting their wires crossed with their technicians. However, Tony called me back and made it right. He even pointed out an issue that is in the horizon that I should look at (without charging me extra or telling me I had to fix it right now). Great service!


Hii need you guys help! Once my thermostat drop below the set temp , my furnace does not turn on and I was wondering what’s wrong with it. It happens mostly on cold nights. Sometimes I would have to go in the basement and turned the furnace power switch off then on and will come on once I switch it off then on.i also change the thermostat recently, so I don’t think that’s the problem

After my initial meeting with HVAC Service I had really high hopes and thought these guys were going to be my HVAC go to company. However, it did not pan out this way whatsoever. Initial estimate meeting - This was the initial meeting I thought I found the go to company. Alberto was friendly, punctual, and knowledgeable. I asked some very basic questions and Alberto was able to explain the why's and why not's of each of my questions. Overall I felt really comfortable with Alberto and was extremely impressed. Then it goes all downhill..... Alberto said they were busy but could either install on the upcoming Saturday. We were going to be out of town and said unfortunately that day did not work. He then proposed the upcoming Tuesday as a possible solution, but just had to confirm with another appointment. I said great. I will review the estimate and call your office to confirm I want to move forward with the install. Within 1-hour of Alberto leaving (probably more like 30 minutes) I called the office to confirm I wanted to move forward with the install and to please confirm that Tuesday will be the install day. The lady on the phone said that she will get in touch with Alberto and call me back. This was on a Friday. On Monday I had not received a call from HVAC Service so I called to follow up. The lady on the phone said they were not able to secure a crane for Tuesday and that the install would not be taking place. Fine, no problem I understand. Two weeks go by and no phone call from HVAC Service regarding install date, or any update at all. I call them to check in to see if they have put me on the schedule and when I can expect to have the AC installed. You can tell by the discussion I had with the lady on the phone that they completely forgot about me and have not scheduled anything. She says she needs to get in contact with the owner because she has no idea on the availability of the crane. I was told that she would call me back by the end of the day with an update. Surprise, surprise, no phone call. I call to follow up at the end of the next day and she said that she has not been able to get in touch with the owner. By this time, I am starting to get frustrated because I am starting to get the run around. I question her if I am even on the schedule or if they attempted to schedule a crane. She says they are extremely busy and that she does not know. So I say, basically I have waited over 2 weeks and you have not put me on the schedule and I am at the end of the install line. No answer. I tell her to talk to her boss and find out what is happening, and I will think about what direction I want to move in at this point. Monday the following week, no phone calls, or follow up. I call to get an update and am told that they cannot install my system because they don't have time. I ask what does that mean, one year? One week? Until the end of summer they say. What does that mean I ask? They say at the end of September. I say thank you for wasting 1 month of my time. How could they have served me better without serving me? 1. Be honest and let me know as soon as possible that the install was going to be delayed and probably not happen until the end of summer. Don't waste a month of my time. I could have reached out to a different company in the time I was waiting for them. 2. Communicate! the thing that upsets me the most is I was the one making all the calls to them. Not once did they ever call me to say we have not forgot about you, or this is what is happening. 3. Provide recommendations on other contractors who could have helped me once they realized they were too busy. I am pretty disappointed it came to this review because I really liked this company and wanted to do work with them. It is a family run business, and reminded me of the HVAC business my dad owned. Beware once you are the one that has to start calling them for updates, or to follow up; your time is probably best served by calling a different contractor.


Regardless of how far along you are in your air conditioning project, you should start looking for a contractor now. The demand for Portland air conditioning has begun to outstrip the supply of contractors, and homeowners are telling us they've had to fight/wait to schedule an installation date. This may also determine the availability of your preferred contractor, as the best contractors' schedules tend to fill more quickly than the rest. Once you've submitted your online request, you can trust that our contractors are the most reliable professionals in the business. Each and every one our contractors has been put through a rigorous ten-step screening process. Our online customer ratings and reviews section will allow you to see what other homeowners have said, not just about individual contractors, but Portland air conditioning installation in general.

Air flow meter Aquastat BACnet Blower door Building automation Carbon dioxide sensor Clean Air Delivery Rate (CADR) Gas sensor Home energy monitor Humidistat HVAC control system Intelligent buildings LonWorks Minimum efficiency reporting value (MERV) OpenTherm Programmable communicating thermostat Programmable thermostat Psychrometrics Room temperature Smart thermostat Thermostat Thermostatic radiator valve

The heat pump gained popularity in the 1950s in Japan and the United States.[13] Heat pumps can extract heat from various sources, such as environmental air, exhaust air from a building, or from the ground. Initially, heat pump HVAC systems were only used in moderate climates, but with improvements in low temperature operation and reduced loads due to more efficient homes, they are increasing in popularity in cooler climates.
Consequently, this water must exit the air handler—typically through plastic pipe or a drain tube. That drain tube goes directly outside, often terminating near the compressor, or to a floor drain or to a small electric “condensate pump” located by the air handler. Where a condensate pump is used, it connects to a 1/2-inch vinyl or rubber tube that exits outdoors or to a drain.

Just like running a marathon, we perform better at full strength. If we’re not feeling great, it’s that much harder to finish the race. Similarly, when you set your thermostat to a certain temperature, the system is tasked with maintaining that temperature throughout the room. Working at full strength, the system can easily maintain that temperature (as long as it’s not below 60 degrees or above 80 degrees). However, when injured, the system may struggle to keep the room at your desired temperature. As such, it’s working harder, which means higher utility bills.

If your air conditioner’s condenser coils, which are located in the outdoor unit, freeze up, your system will not run properly. Poor airflow through your cooling system can cause ice to form on the coils. Obstructions are typically the cause – such as dirty air filters or blocked return air ducts. Low refrigerant could also be the cause, requiring a refrigerant charge. A home AC repair technician can diagnose the issue behind your frozen coils, resolve it, and safely thaw your coils to restore cooling in your home.”
If your compressor doesn’t have an overload button and you hear it humming or buzzing, poke a screwdriver or stick down through the top grille and try to spin the fan blades clockwise. If doing this gives the fan enough of a boost to get it going, the unit has a faulty capacitor that must be replaced. See How to Test and Replace an AC Run Capacitor, above.
Your HVAC professional can perform a yearly tune-up of your system for around $80-$100. This yearly maintenance can go far toward heading off major repairs to your system, and provide you with peace of mind and considerable savings in the long term. Additionally, regular servicing of your AC unit can help a home inspector to certify that your unit is working properly in the event you decide to sell your home.

Service Experts Heating and Air Conditioning was founded on the basis of providing customers with the best heating and cooling practices in the industry. Since its inception, Service Experts has been dedicated to community, providing the top of the line HVAC products and services in your area. If you want more information about your local HVAC leaders, call us at 866-397-3787 or set up an appointment with us online.

×