My A/C went out on a Friday and I found this company in the phone book on Saturday morning. They came out just a few hours later and it was decided that I needed a new system. The pricing was good as well as the customer service. They brought me a temporary portable air conditioner for Saturday night and they replaced my system on Sunday. This company has the best customer service of any business that I have dealt with. I would highly recommend this company to anyone and have. Great Company!!!!!
Berkeys is a licensed HVAC contractor and air conditioning company offering AC repair, Air Conditioning tune-up, and air conditioning replacement services in Southlake, TX, Keller, TX, Coppell, TX, Colleyville, TX, Grapevine, TX, Plano, TX, Fort Worth, TX, Arlington, TX, Frisco, TX, Dallas, TX, Addison, TX, Flower Mound, TX, Irving, TX, McKinney, TX, Arlington, TX, Euless, TX, Denton, TX, Highland Village, TX, Grand Prairie, TX, Westlake, TX, Farmers Branch, TX, Lewisville, TX and more. Call to confirm service for your home.
Change your air filter. Air filters need changed every 30 to 90 days, depending on the type of filter you have. It’s a wise idea to get on a regular schedule – note filter changes on your calendar, and make a note to check them every month during the summer, when your system runs ‘round the clock. Follow these filter change instructions to get the job done.
You can count on our analysis of your home’s plumbing, air conditioning & electrical problems as well as our recommendations for installation, and maintenance. We provide state-of-the-art equipment, so all jobs are performed professionally and efficiently. To schedule an appointment with some of the best Houston area plumbers, electricians or air conditioning repair and installation experts, call 713-766-3605713-766-3605.
1/27/2015 Jim, we are committed to 100% satisfaction so every customer is very important to us.… Jim, we are committed to 100% satisfaction so every customer is very important to us. Unfortunately, with all companies, there will be times when a customer may feel they have been let down. If that happens with us, we certainly want to hear from you. To better address your concerns, please contact Steve, our Customer Relations Specialist, directly by email at [email protected] or give him a call at 925-318-4795. Hopefully we will hear from you soon so that we can promptly understand your issue and address the issue! Thanks Jim Read more
Are you considering whether you need to replace your home’s central heating, ventilation, and air conditioning unit—commonly known as your HVAC system? As a general rule, if your existing HVAC system is more than 15 years old, it’s only a matter of time before it starts to cost more to maintain than it would to replace it with a new system. In addition to higher energy bills brought on by a system that can no longer function at peak efficiency, repair costs will also start to add up as parts are replaced and the ventilation system undergoes major overhauls.
The Refrigeration Loop is a closed system and refrigerant should never have to be added to the unit unless there is a leak. Most residential units use R-22/R410A refrigerant. Prices of R-22/R410A are rising every year as we get closer to the date when refrigerant manufacturers will no longer be able to make R-22/R410A. Phase-out of R-22, an HCFC, begins in 2010 and expected to be complete by 2020.). Furthermore, make sure you ask what the service company charges for R-22 when you are calling an HVAC contractor.
Change the filter: A new filter can cost as little as $20. Since this is the most effective way of maintaining your AC system, there is no reason not to change your filter. Homeowners should change your AC filters whenever it gets dirty. Depending on the filter, you may have to change it once every six months or once every month. Each filter should indicate how long it will last.
Whether you have concerns about your indoor air quality or want to upgrade your air conditioning unit, Aire Serv of Omaha knows how to get the job done. Our Omaha heater repair and AC maintenance experts can tackle problems big and small throughout Bellevue, Carter Lake (IA), St. Columbans, Waterloo, La Vista, and surrounding communities. Trust our team to take care of your heating and air conditioning service needs today.
An example of a geothermal heat pump that uses a body of water as the heat sink, is the system used by the Trump International Hotel and Tower in Chicago, Illinois. This building is situated on the Chicago River, and uses cold river water by pumping it into a recirculating cooling system, where heat exchangers transfer heat from the building into the water, and then the now-warmed water is pumped back into the Chicago River.
One problem occurred on Monday. When we called at 2:30 in the afternoon to check on status, we were told that "the tech is on the phone with the parts supplier now". It seems more likely that they had forgotten about us and our call woke them up. But even if true, why the heck did they wait until 2:30 to order the part? Maybe if they had ordered it in the morning they could have had it the same day. So I'm taking off one star for that.
Alberto said they were busy but could either install on the upcoming Saturday. We were going to be out of town and said unfortunately that day did not work. He then proposed the upcoming Tuesday as a possible solution, but just had to confirm with another appointment. I said great. I will review the estimate and call your office to confirm I want to move forward with the install.
Tony was very good - appointment took a while to book, but that's understandable, since they have built a great business and have lots of people calling them. Tony came this Sunday morning, and once he saw the HVAC unit, knew exactly what the issue was - fixed it in under 20 mins, and my AC was back to normal Pricing is fair - parts, labor and diagnostic fee and tax I would definitely recommend him to anyone needing his services. He's honest, very nice to deal with even made my toddler son smile. 5 STARS ALL THE WAY!
The performance of vapor compression refrigeration cycles is limited by thermodynamics. These air conditioning and heat pump devices move heat rather than convert it from one form to another, so thermal efficiencies do not appropriately describe the performance of these devices. The Coefficient-of-Performance (COP) measures performance, but this dimensionless measure has not been adopted. Instead, the Energy Efficiency Ratio (EER) has traditionally been used to characterize the performance of many HVAC systems. EER is the Energy Efficiency Ratio based on a 35 °C (95 °F) outdoor temperature. To more accurately describe the performance of air conditioning equipment over a typical cooling season a modified version of the EER, the Seasonal Energy Efficiency Ratio (SEER), or in Europe the ESEER, is used. SEER ratings are based on seasonal temperature averages instead of a constant 35 °C (95 °F) outdoor temperature. The current industry minimum SEER rating is 14 SEER.
“Air conditioners contain refrigerant, which allows the system to run efficiently, releasing heat from the air to cool it. Air conditioners are charged with refrigerant upon installation; a poor charge or a refrigerant leak can cause the system’s refrigerant level to fall below the proper amount. To remedy this, the home AC repair which is performed is a refrigerant recharge, accompanied by fixing the leak if that was the source causing low refrigerant levels.
With the split system, the evaporator coil is connected to a remote condenser unit using refrigerant piping between an indoor and outdoor unit instead of ducting air directly from the outdoor unit. Indoor units with directional vents mount onto walls, suspended from ceilings, or fit into the ceiling. Other indoor units mount inside the ceiling cavity, so that short lengths of duct handle air from the indoor unit to vents or diffusers around the rooms.
In the UK, the Ozone Regulations came into force in 2000 and banned the use of ozone depleting HCFC refrigerants such as R22 in new systems. The Regulation banned the use of R22 as a "top-up" fluid for maintenance between 2010 (for virgin fluid) and 2015 (for recycled fluid). This means that equipment that uses R22 can still operate, as long as it does not leak. Although R22 is now banned, units that use the refrigerant can still be serviced and maintained.
At Van Haaften Plumbing & Heating, heating and cooling isn’t just our job, it’s our passion. We’re dedicated to providing you with the top HVAC service in Pella. No matter the size of the problem or time of day, you can rely on us to get the job done properly. After all, Van Haaften Plumbing & Heating has been serving the community since 1949, bringing comfort to our customers in every season.
Outside of your home is an outdoor unit, which is called a condenser. Inside the condenser is a compressor, a condenser coil, and a large fan. The compressor pumps cool refrigerant to an evaporator coil located either in the air handler or just outside the furnace. The evaporator coil gets really cold so that when the blower or furnace pushes warm air past it, the air is cooled. This cool air is then distributed throughout your home through a series of air ducts. Heat is absorbed by the evaporator coil, which warms the refrigerant moving through the coils. This warm refrigerant is then pumped back outside to the condenser coil, where a giant fan cools it off allowing the warm air to escape. This cycle is repeated until your thermostat detects that your home has reached the temperature you set it to.
If the air conditioner on your thermostat set low, and you aren't feeling cool air, it could be that debris is blocking the condenser. Check on your system outside and remove any tree branches or leaves from around it. Debris can easily obstruct air flow, so make sure the area around your air conditioning unit is clean and trimmed back. Make sure your filter is clean. A buildup of dirt and dust can cause poor air circulation.
2) Keep your coils clean. The AC coils and fins on the outside of your unit need to be kept clean and clear of obstructions. Leaves and other debris sometimes accumulate around your unit. If obstructions are present, your unit must work harder to function than it should. You can clean your unit with a regular garden hose and a broom. Do not use a pressure washer, as the strong spray could cause harm to your system. A little bit of housekeeping in this regard goes far toward keeping your air conditioner working optimally.
The first air conditioners and refrigerators employed toxic or flammable gases, such as ammonia, methyl chloride, or propane, that could result in fatal accidents when they leaked. Thomas Midgley, Jr. created the first non-flammable, non-toxic chlorofluorocarbon gas, Freon, in 1928. The name is a trademark name owned by DuPont for any chlorofluorocarbon (CFC), hydrochlorofluorocarbon (HCFC), or hydrofluorocarbon (HFC) refrigerant. The refrigerant names include a number indicating the molecular composition (e.g., R-11, R-12, R-22, R-134A). The blend most used in direct-expansion home and building comfort cooling is an HCFC known as chlorodifluoromethane (R-22).
Ventilation is the process of changing or replacing air in any space to control temperature or remove any combination of moisture, odors, smoke, heat, dust, airborne bacteria, or carbon dioxide, and to replenish oxygen. Ventilation includes both the exchange of air with the outside as well as circulation of air within the building. It is one of the most important factors for maintaining acceptable indoor air quality in buildings. Methods for ventilating a building may be divided into mechanical/forced and natural types.
Each spring and fall before you start using your air conditioner, furnace, or other heating and cooling systems, you should get a tune-up to ensure your HVAC system is ready for the season. By spending a little twice a year, you can save a lot in energy bills by keeping your system operating at peak efficiency. You also can avoid costly repairs by identifying and fixing minor problems before they turn into big ones. Plus, many homeowners don't realize that their manufacturer's warranties may be considered invalid if they aren't getting their unit serviced twice a year.
RepairClinic.com® is the trusted online parts store with 3,000,000+ appliance parts, lawn mower parts, power tools and heating and cooling parts for over 200 appliance, lawn equipment, power tools and heating & cooling equipment brands. Since our launch in 1999, RepairClinic.com has helped 4,500,000+ people save more than $500 million in repair costs by fixing stuff on their own.
When you trust your winter comfort to Edwards Heating & Air, we answer with state-of-the-art technology, NATE-certified technicians, and prompt action. As a Carrier Factory Authorized Dealer, we specialize in the most proven and sophisticated solutions to home and commercial temperature control. Through ongoing factory training and strict installation and service procedures, the team from Edwards Heating & Air delivers superior workmanship and superior results. We ensure your demands for efficiency, reliability, and consistent heating are met, and your expectations for courteous and skilled service are exceeded. Whether you are in the process of building your dream home, in need of effective heating for your existing home or business, or upgrading your furnace or heat pump, our installation specialists provide informed recommendations, attention to detail, and quick turnaround on your project. Serving Acworth and the surrounding areas of Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA since 2001, you can count on Edwards Heating & Air for everything from installation and maintenance to emergency repairs.
As you would expect, air conditioning in Portland isn't as expensive as in most areas of the country, owing simply to the fact that most homes don't require particularly large or state-of-the-art units. While our data suggests the national average for air conditioning installation is about $6,000, in Portland we see numbers between $3,000-$4,000, although we've also seen projects as low as $1,500 and as high as $6,000. Heat pump installation is likely to be closer to the national average, but as mentioned, these devices work to be cool your home in the summer and heat in the winter.
Circulating refrigerant vapor enters the compressor, where its pressure and temperature are increased. The hot, compressed refrigerant vapor is now at a temperature and pressure at which it can be condensed and is routed through a condenser. Here it is cooled by air flowing across the condenser coils and condensed into a liquid. Thus, the circulating refrigerant removes heat from the system and the heat is carried away by the air. The removal of this heat can be greatly augmented by pouring water over the condenser coils, making it much cooler when it hits the expansion valve.
Air-source heat pumps are more popular in milder winter climates where the temperature is frequently in the range of 4–13 °C (40–55 °F), because heat pumps become inefficient in more extreme cold. This is because ice forms on the outdoor unit's heat exchanger coil, which blocks air flow over the coil. To compensate for this, the heat pump system must temporarily switch back into the regular air conditioning mode to switch the outdoor evaporator coil back to being the condenser coil, so that it can heat up and defrost. A heat pump system will therefore have a form of electric resistance heating in the indoor air path that is activated only in this mode in order to compensate for the temporary indoor air cooling, which would otherwise be uncomfortable in the winter.
The condenser fan is another important HVAC element that must be maintained. Condenser fans that contain oil ports should be lubricated at least annually. The outside condenser should also be shielded from direct sunlight if possible. Keeping vegetation at least two feet away from outdoor HVAC units will also promote higher performance and potentially lower energy bills due to higher efficiency. The further away vegetation is, the better an HVAC unit will operate.
James Heating & A/C, Inc offers furnace service appointments that help keep your furnace in tip-top shape and operating efficiently for you all winter long. Whether that’s finding small issues before they become big problems, identifying potential safety hazards or making sure you’re maintaining your manufacturer’s warranty, our experts have you covered. Our trained technicians complete furnace service with care, inspecting a number of components in and around your furnace. In fact, our multi-point inspection can help make sure your system runs smoothly throughout the winter.
Since 1971, One Hour Heating & Air Conditioning has been the leading Charlotte AC repair company. Our technicians are not only professional experts, but they work 24/7, 365 days a year to make sure you’re comfortable. Plus, they’re “Always on time… or you don’t pay a dime.” ®. If you are looking for heating and air in Charlotte NC, you are in the right place!
At Edwards Heating & Air, our dedication to quality extends to every service and product we provide. Since first opening our doors in 2001, we have continued to protect home and business owners in Acworth and across Acworth, Alpharetta, Cummings, Cartersville, Kennesaw & Woodstock, GA with conscientious workmanship, honest pricing, and exceptional products. By never failing to handle every project with care and dedication, we earn your satisfaction, recommendation, and business. We have continued to expand our list of clients by answering every call promptly, responding with courteous service, and delivering rewarding solutions. Whether you are in need of new installation, replacement, upkeep or repairs for residential or commercial, heating, cooling, ventilation, and air quality, know that Edwards Heating & Air gets results.
When central air conditioning service fails during a heat spell, you may have to wait days for an HVAC repair technician or a ac contractor to show up, and you’ll probably pay at least several hundred for the repair. But if you’re comfortable working around electricity and are willing to spend about $50 on parts, you can probably repair your air conditioning service yourself in about two hours and save about $225 on parts markup and labor.