Denver HVAC Repair

All modern air conditioning systems, even small window package units, are equipped with internal air filters. These are generally of a lightweight gauzy material, and must be replaced or washed as conditions warrant. For example, a building in a high dust environment, or a home with furry pets, will need to have the filters changed more often than buildings without these dirt loads. Failure to replace these filters as needed will contribute to a lower heat exchange rate, resulting in wasted energy, shortened equipment life, and higher energy bills; low air flow can result in iced-over evaporator coils, which can completely stop air flow. Additionally, very dirty or plugged filters can cause overheating during a heating cycle, and can result in damage to the system or even fire.

If your heating system is not running efficiently, it will not heat your home effectively. A good sign you have an inefficient heater is if you notice some rooms in your house aren’t heating to the temperature you set. Older systems could have difficulty heating your entire household, and you’ll know this if you notice some rooms are warmer than others.
"Customer service was great, and the price was in-line with other places, and fast service. We had a whole replacement of the outside and inside. I would have liked to see a better install for the furnace and new thermostat - the new thermostat should have gone where the old one was, and even tho the new furnace was a tight fit, they didn't offer to come back and repair the case molding, or give me a discount on the damage done, and I believe they should have put a disconnect box on the outside of the home, to make it easier for any future repairs needed. Other than that, am very happy with the cooling and heating!"
A home that is too dry in the winter can affect the health of your entire family, causing itchy skin, chapped lips, and aggravating allergies and colds. A whole-home humidifier improves the air quality of your home by adding water vapor through your HVAC system. Having Brubaker Inc. install a humidifier to your HVAC system is a simple step that adds immediate relief and comfort throughout your home.
Natural ventilation is the ventilation of a building with outside air without using fans or other mechanical systems. It can be via operable windows, louvers, or trickle vents when spaces are small and the architecture permits. In more complex schemes, warm air is allowed to rise and flow out high building openings to the outside (stack effect), causing cool outside air to be drawn into low building openings. Natural ventilation schemes can use very little energy, but care must be taken to ensure comfort. In warm or humid climates, maintaining thermal comfort solely via natural ventilation might not be possible. Air conditioning systems are used, either as backups or supplements. Air-side economizers also use outside air to condition spaces, but do so using fans, ducts, dampers, and control systems to introduce and distribute cool outdoor air when appropriate.

We'll help » Can't find a model number? Using a model number is the fastest way to find your part. Shop now » RANGE PARTS FOR EVERY MAJOR BRAND Heating Elements, Ignitors, Cooktops and More. Learn More » A HEALTHY AND HAPPY LAWN Easy Guide To The Best Lawn On The Block. Watch now » Expert repair videos Don’t Worry. With over 3000 how-to videos we’ve got you covered.Learn More » Read More » CUSTOMER TESTIMONIALS Our customers save time, money & become DIY repair experts.


Multiple inventions within this time frame preceded the beginnings of first comfort air conditioning system, which was designed in 1902 by Alfred Wolff (Cooper, 2003) for the New York Stock Exchange, while Willis Carrier equipped the Sacketts-Wilhems Printing Company with the process AC unit the same year. Coyne College was the first school to offer HVAC training in 1899.[12]
Your home’s HVAC system is a fine-tuned piece of machinery. Like your car, your system needs regular maintenance and tune-ups to ensure it is running reliably. Manufacturer warranties for most new systems require annual tune-ups, and for good reason: these preventative maintenance measures extend the life of your system by keeping your system running the way it is designed to run.
In 2006, a new HVAC rule went into affect for residential air conditioners, requiring all to have a Seasonal Energy Efficiency Ratio (SEER) of 13 or higher. As you might expect, the more efficient the unit is (or newer), the lower your average AC repair cost will be. Keep in mind, if for some reason your high-efficient repair bill is high, you’re still saving on energy costs every month through your electric and gas bills. 

The condensed, pressurized, and still usually somewhat hot liquid refrigerant is next routed through an expansion valve (often nothing more than a pinhole in the system's copper tubing) where it undergoes an abrupt reduction in pressure. That pressure reduction results in flash evaporation of a part of the liquid refrigerant, greatly lowering its temperature. The cold refrigerant is then routed through the evaporator. A fan blows the interior warm air (which is to be cooled) across the evaporator, causing the liquid part of the cold refrigerant mixture to evaporate as well, further lowering the temperature. The warm air is therefore cooled and is pumped by an exhaust fan/ blower into the room. To complete the refrigeration cycle, the refrigerant vapor is routed back into the compressor. In order for the process to have any efficiency, the cooling/evaporative portion of the system must be separated by some kind of physical barrier from the heating/condensing portion, and each portion must have its own fan to circulate its own "kind" of air (either the hot air or the cool air).
The main problem when installing a multi-split system is the laying of long refrigerant lines for connecting the external unit to the internal ones. While installing a separate split system, workers try to locate both units opposite to each other, where the length of the line is minimal. Installing a multi-split system creates more difficulties, since some of indoor units can be located far from the outside. The first models of multi-split systems had one common control system that did not allow you to set the air conditioning individually for each room. However, now the market has a wide selection of multi-split systems, in which the functional characteristics of indoor units operate separately from each other.
An HVAC service contract can be a very cost-effective way to make sure your system is properly maintained and to have someone on call when things go wrong. Depending on the amount of services offered, they cost between $150 and $500 per year, but they often include yearly inspections of both your furnace and A/C, discounts on major repairs, and preferred scheduling status when you have problems during the busy season. 
Never fails when you have guests! Always a plumbing issue pops up! First time I have called Bill Howe. Shower knob was frozen & we couldn't budge it. Really nice looking & polite young man named Marcus showed up promptly. He proceeded to look at problem. He explained problem & possible options if part was not easily replaceable. Fortunately the faucet was fixed with a replacement part without complications. Great news since the shower is 43 yrs. old!! Experience was very positive & I highly recommend this company!! Young repairman could not have been nicer or more professional. Will definitely recommend them.
When signs of serious trouble arise, it is best to call a professional HVAC technician immediately. Waiting can allow the problem to worsen, which can lead to a higher repair bill. Finding a qualified technician can be as easy as asking family, friends and neighbors for recommendations or consulting online review websites and choosing a service provider that has received a significant number of positive reviews. Consumers must verify that any professional who is hired to do HVAC repair and maintenance has been properly trained and certified. Many service providers list licensing and certification information on their website.Last updated on Jul 11, 2018
A mini-split system typically supplies air conditioned and heated air to a single or a few rooms of a building.[38] Multi-zone systems are a common application of ductless systems and allow up to 8 rooms (zones) to be conditioned from a single outdoor unit. Multi-zone systems typically offer a variety of indoor unit styles including wall-mounted, ceiling-mounted, ceiling recessed, and horizontal ducted. Mini-split systems typically produce 9,000 to 36,000 Btu (9,500–38,000 kJ) per hour of cooling. Multi-zone systems provide extended cooling and heating capacity up to 60,000 Btu's.

A specialized air conditioner that is used only for dehumidifying is called a dehumidifier. It also uses a refrigeration cycle, but differs from a standard air conditioner in that both the evaporator and the condenser are placed in the same air path. A standard air conditioner transfers heat energy out of the room because its condenser coil releases heat outside. However, since all components of the dehumidifier are in the same room, no heat energy is removed. Instead, the electric power consumed by the dehumidifier remains in the room as heat, so the room is actually heated, just as by an electric heater that draws the same amount of power.
A contactor is a $25 mechanical relay that uses low-voltage power from the thermostat to switch 220-volt high-amperage current to the compressor and condenser fan. AC contactors can wear out and are at the top of the list of common air conditioning service failures. Even if your contactor is working, it pays to replace it every five years or so. Unscrew the old contactor before removing the wires. Then move the wires to the new unit (photo 6).
×